| 臺北醫學大學 |
2013 |
Research on CBN/TiC composites Part1: Effects of the cBN content and sintering process on the hardness and transverse rupture strength
|
S.Y.Chiou;S.F.Ou;Y.G.Jang;K.L.Ou |
| 臺北醫學大學 |
2013 |
Development of electrically conductive zirconia Part1: The optimal process parameters and mechanical properties
|
S.Y.Chiou;C.F.Wang;S.F.Ou;K.L.Ou;Z.T.Tsai |
| 臺北醫學大學 |
2013 |
Surface properties of nano-structural silicon-doped carbon films for biomedical applications
|
S.F.Ou;C.S.Chen;H.Hosseinkhani;C.H.Yu;Y.D.Shen;K.L.Ou |
| 臺北醫學大學 |
2013 |
Research on cell behavior related to anodized and hydrothermally treated titanium surface
|
C.S.Chen;Y.L.Tsao;D.Y.Wang;S.F.Ou;H.Y.Cheng;Y.C.Chiang;K.L.Ou |
| 臺北醫學大學 |
2013 |
Preparation, Characterization, and Properties of Anticoagulation and Antibacterial Films of Carbon-Based Nanowires Fabricated on Surface of Ti Implants
|
C.F.Huang;Y.H.Chan;L.K.Chen;C.M.Liu;W.C.Huang;S.F.Ou;K.L.Ou |
| 臺北醫學大學 |
2012 |
Research of antibacterial activity on silver containing yttria-stabilized– zirconia bioceramic
|
S.F.Ou;M.S.Huang;S.Y.Chiou;K.L.Ou |
| 臺北醫學大學 |
2012 |
Optical Tweezers-Assisted Cross-Correlation Analysis for a Non-intrusive Fluid Temperature Measurement in Microdomains
|
C.M.Cheng;M.C.Chang;Y.F.Chang;W.T.Wang;C.T.Hsu;J.S.Tsai;C.Y.Liu;C.M.Wu;K.L.Ou;T.S.Yang |
| 臺北醫學大學 |
2012 |
Strategy to controllably release gold nanoparticles from hexadecyltrimethylammonium bromide-capped gold microparticles
|
K.L.Ou;K.H.Yang;T.Y.Lo;Y.C.Liu;Y.Z.Chen |
| 臺北醫學大學 |
2012 |
Hemocompatibility evaluation of plasma-nitrided austenitic stainless steels at low temperature
|
K.L.Ou;W.C.Lan;C.M.Liu;P.W.Peng |
| 臺北醫學大學 |
2012 |
Influence of drying treatment to electrochemically roughened Ag substrates on the corresponding surface-enhanced Raman scattering performances
|
K.L.Ou;T.C.Hsu;Y.C.Liu;K.H.Yang |
| 臺北醫學大學 |
2012 |
Hot-injection synthesis of monodispersed Cu2ZnSn(SxSe1-x)4 nanocrystals: tunable composition and optical properties
|
K.L.Ou;J.C.Fan;J.K.Chen;C.C.Huang;L.Y.Chen;J.H.Ho;J.Y.Chang |
| 臺北醫學大學 |
2012 |
Phase transformation of the diamond-like carbon with anti-microorganism additions
|
M.Y.Tsai;K.L.Ou;M.H.Lin;F.Y.Fan;S.F.Ou |
| 臺北醫學大學 |
2012 |
Fabrication and characterization of well-aligned
|
C.C.Wu;K.L.Ou;C.L.Tseng |
| 臺北醫學大學 |
2012 |
The effect of titanium with electrochemical functionalization on the response of the adherent osteoblastic-like cell
|
Y.H.Lin;P.W.Peng;K.L.Ou |
| 臺北醫學大學 |
2012 |
The Ti to TiO and TiO to Anatase Transformations Induced by Anodizing and Annealing Treatments of Ti Thin Film
|
Y.L.Chung;D.S.Gan;K.L.Ou |
| 臺北醫學大學 |
2012 |
Phase transformation of hydroxyapatite decomposition
|
S.F.Ou;S.Y.Chiou;K.L.Ou |
| 臺北醫學大學 |
2012 |
Research of antibacterial activity on silver containing yttria-stabilized-zirconia
|
S.F.Ou;M.S.Huang;S.Y.Chiou;K.L.Ou |
| 臺北醫學大學 |
2012 |
Improvement on hardness and corrosion resistance of ferritic stainless steel via PVD-(Ti,Cr)N coatings
|
C.H.Hsu;C.K.Lin;K.H.Huang;K.L.Ou |
| 臺北醫學大學 |
2012 |
Effects of Surface Functionalization on the Nanostructure and Biomechanical Properties of Binary Titanium-Niobium Alloys
|
Paul, C.H.Kuo;H.H.Chou;Y.H.Lin;P.W.Peng;K.L.Ou*;W.R.Lee |
| 臺北醫學大學 |
2012 |
Machining heat induced phase transformation on the surface hardening layer of high strength ferrous-based biomedical stainless steel
|
C.Y.Lin;J.L.Li;Y.H.Hsieh;B.A.Jones;K.L.Ou*;C.H.Yu |
| 臺北醫學大學 |
2012 |
Enhancement of biomechanical behavior on osseointegration of implant with SLAffinity
|
K.T.Chu;H.Y.Cheng;Y.N.Pan;S.Y.Chen;K.L.Ou |
| 臺北醫學大學 |
2012 |
Stress effect on bone remodeling and osseointegration on dental implant with novel nano/microporous surface functionalization
|
H.Y.Cheng;K.T.Chu;F.C.Shen;Y.N.Pan;K.L.Ou |
| 臺北醫學大學 |
2012 |
Phase transformation on bone cement: Monocalcium phosphate monohydrate into calcium-deficient hydroxyapatite during setting
|
S.Y.Chen;S.F.Ou;N.C.Teng;K.T.Chu;K.L.Ou |
| 臺北醫學大學 |
2012 |
Microstructure of silicon-incorporated carbon films with various silicon concentrations deposited by hybrid magnetron sputtering/chemical vapor deposition
|
Cheng, Hsin-Chung;Duen-JengWang;Wen-ChienLan;Pei-YiWang;Ou, Shih-Fu;Ya-JuHsu;K.L.Ou |
| 臺北醫學大學 |
2012 |
Research of phase transformation induced biodegradable properties on hydroxyapatite and tricalcium phosphate based bioceramic
|
K.T.Chu;S.F.Ou;S.Y.Chen;S.Y.Chiou;H.H.Chou;K.L.Ou |
| 臺北醫學大學 |
2012 |
Stress analysis during jaw movement based on vivo computer tomography images from patients with temporomandibular disorders
|
H.Y.Cheng;P.W.Peng;S.T.Chang;Y.J.Lin;Y.N.Pan;S.C.Lee;K.L.Ou*;W.C.Hsu |
| 臺北醫學大學 |
2011 |
Hydrocarbon fuels produced by catalytic pyrolysis of hospital plastic wastesin a fluidizing cracking process
|
H.T.Lin;M.S.Huang;J.W.Luo;L.H.Lin;C.M.Lee;K.L.Ou |
| 臺北醫學大學 |
2011 |
Thermochemical conversion of polymer wastes into hydrocarbon fuels over various fluidizing cracking catalysts
|
W.C.Huang;M.S.Huang;C.F.Huang;C.C.Chen;K.L.Ou |
| 臺北醫學大學 |
2011 |
High-temperature microstructural characteristics of a novel biomedical titanium alloy
|
M.C.Chang;C.W.Luo;M.S.Huang;K.L.Ou;L.H.Lin;H.C.Cheng |
| 臺北醫學大學 |
2011 |
Biocompatibility of metal carbides on Fe-Al-Mn-based alloys
|
C.H.Wang;J.W.Luo;C.F.Huang;M.S.Huang;K.L.Ou;C.H.Yu |
| 臺北醫學大學 |
2011 |
Research of microstructural characteristics on nanocrystalline diamond by microwave plasma CVD
|
J.M.Hung;L.H.Lin;Y.H.Shih;C.M.Liu;C.H.Yu;W.H.Chang;K.L.Ou |
| 臺北醫學大學 |
2011 |
Influence of Titanium addition on the microstructure of the novel ferous-based stainless steel
|
C.C.Lin;L.H.Lin;J.M.Hung;Y.H.Shih;C.Z.Wu;C.Y.Chao;K.L.Ou |
| 臺北醫學大學 |
2011 |
Development of the novel ferrous-based stainless steel for biomedical applications, Part I: High-temperature microstructure, mechanical properties and damping behavior
|
C.Z.Wu;S.C.Chen;Y.H.Shih;J.M.Hung;C.C.Lin;L.H.Lin;K.L.Ou |
| 臺北醫學大學 |
2011 |
In?uence of titanium addition on the microstructure of the novel ferrous-based stainless steel
|
C.C.Lin;L.H.Lin;J.M.Hung;Y.H.Shih;C.Z.Wu;K.L.Ou;C.Y.Chao |
| 臺北醫學大學 |
2011 |
Development of the novel ferous-based stainless steel for biomedical applications part I: high temperature microstructure, mechanical properties and damping behavior
|
C.Z.Wu;S.C.Chen;Y.H.Shih;J.M.Hung;C.C.Lin;L.H.Lin;K.L.Ou |
| 臺北醫學大學 |
2011 |
Microstructure and antibacterial properties of microwave plasma nitrided layers on biomedical stainless steel
|
L.H.Lin;H.C.Cheng;S.C.Chen;C.Z.Wu;J.M.Hung;K.L.Ou |
| 臺北醫學大學 |
2011 |
Development of silver-bearing austenite antibacterial stainless steels for biomedical applications part I: microstructure characteristics, mechanical properties and antibacterial mechanisms
|
C.F.Huang;H.J.Chiang;W.C.Lan;H.H.Chou;K.L.Ou;C.H.Yu |
| 臺北醫學大學 |
2011 |
Mechanical properties and antibacterial activity of copper doped diamond-like carbon ?lms
|
Y.H.Chan;C.F.Huang;K.L.Ou;P.W.Peng |
| 臺北醫學大學 |
2011 |
Effect of collagen on mechanical properties of hydroxyapatite coatings
|
K.L.Ou;R.J.Chung;F.Y.Tsai;P.Y.Liang;S.W.Huang;S.Y.Chang |
| 臺北醫學大學 |
2011 |
Membranes of epitaxial-like packed, super aligned electrospun micron hollow Poly(L-lactic acid) (PLLA) fibers
|
K.L.Ou;C.S.Chen;L.H.Lin;J.C.Lu;Y.C.Shu;W.C.Tseng;J.C.Yang;S.Y.Lee;C.C.Chen |
| 臺北醫學大學 |
2011 |
Sonoelectrochemical Synthesis of Chitosan/Gold Nanocomposites?for Application in Removing Toxic Materials?in Mainstream Smokes
|
K.L.Ou;C.C.Yu;Y.C.Liu;K.H.Yang;C.C.Wang;Q.Y.Chen |
| 臺北醫學大學 |
2011 |
New strategy to prepare enriched and small gold nanoparticles by sonoelectrochemical pulse methods
|
K.L.Ou;K.H.Yang;Y.C.Liu;T.C.Hsu;Q.Y.Chen |
| 臺北醫學大學 |
2011 |
Surface modi?cation of austenitic stainless steel with plasma nitriding for biomedical applications
|
K.L.Ou;H.H.Chou;C.M.Liu;P.W.Peng |
| 臺北醫學大學 |
2011 |
Orthodontic bonding with self-etching primer and self-adhesive systems
|
C.H.Chu;K.L.Ou;D.R.Dong;H.M.Huang;H.H.Tsai;W.N.Wang |
| 臺北醫學大學 |
2011 |
Effects of Different Extracellular Matrices and Growth Factor Immobilization on Biodegradability and Biocompatibility of Macroporous Bacterial Cellulose
|
Y.K.Lin;K.H.Chen;M.Liu;K.L.Ou* |
| 臺北醫學大學 |
2011 |
Microstructure and antibacterial properties of microwave plasma nitrided layers on biomedical stainless steels
|
L.H.Lin;S.C.Chen;C.Z.Wu;J.M.Hung;K.L.Ou |
| 臺北醫學大學 |
2011 |
A facile route to tungsten oxide nanomaterials with controlled morphology and structure
|
Lin, H.C;C.Y.Su;Z.K.Yang;C.K.Lin;K.L.Ou |
| 臺北醫學大學 |
2011 |
Biological surface modification of titanium surfaces using glow discharge plasma
|
H.M.Huang;S.C.Hsieh;N.C.Teng;S.W.Feng;K.L.Ou;W.J.Chang |
| 臺北醫學大學 |
2011 |
Influence of (Fe, Mn)3AlCx phase precipitates on the damping behavior and mechanical properties of the austenitic Fe-Al-Mn-C-Co alloy
|
H.C.Cheng;C.F.Huang;C.S.Chen;C.Y.Chao;K.L.Ou*;C.H.Yu |
| 臺北醫學大學 |
2011 |
Nanoparticles prepared from the water extract of Gusuibu (Drynaria fortunei J. Sm.) protects osteoblasts against insults and promotes cell maturation
|
H.W.Fang;I.J.Lee;C.K.Hsu;S.H.Liu;K.L.Ou;M.S.Liao |
