| 臺大學術典藏 |
2022-02-23T02:19:54Z |
Cutting balloon angioplasty for resistant venous stenoses of dialysis access: Immediate and patency results
|
CHIH-CHENG WU; Wen S.-C. |
| 國立成功大學 |
2021 |
Cutting balloon combined with drug-coated balloon angioplasty for the treatment of in-stent restenosis
|
Zheng, Y.-C.;Lee, W.-C.;Fang, H.-Y.;Chen, Chen C.-J.;Yang, C.-H.;Wu, C.-J.;Fang, C.-Y. |
| 國立臺灣大學 |
2009 |
CUTTING EDGE: IL-27 INDUCES THE TRANSCRIPTION FACTOR C-MAF, CYTOKINE IL-21, AND THE COSTIMULATORY RECEPTOR ICOS THAT COORDINATELY ACT TOGETHER TO PROMOTE DIFFERENTIATION OF IL-10-PRODUCING TR1 CELLS
|
賴正晏; 繆希椿; LAI, CHEN-YEN; MIAW, SHI-CHUEN |
| 臺大學術典藏 |
2019-08-06T05:07:48Z |
Cutting edge: IL-27 induces the transcription factor c-Maf, cytokine IL-21, and the costimulatory receptor ICOS that coordinately act together to promote differentiation of IL-10-producing Tr1 cells
|
Pot, Caroline;Jin, Hulin;Awasthi, Amit;Liu, Sue Min;Lai, Chen-Yen;Madan, Rajat;Sharpe, Arlene H;Karp, Christopher L;Shi-Chuen Miaw;Ho, I-Cheng;Kuchroo, Vijay K; Pot, Caroline; Jin, Hulin; Awasthi, Amit; Liu, Sue Min; Lai, Chen-Yen; Madan, Rajat; Sharpe, Arlene H; Karp, Christopher L; SHI-CHUEN MIAW; Ho, I-Cheng; Kuchroo, Vijay K |
| 國立臺灣大學 |
2006 |
Cutting Edge: Insufficient Perforin Expression in Cd8(+) T Cells in Response to Hemagglutinin from Avian Influenza (H5n1) Virus
|
謝思民; 張上淳; HSIEH, SZU-MIN; CHANG, SHAN-CHWEN |
| 臺大學術典藏 |
2018-09-10T05:44:37Z |
Cutting edge: Insufficient perforin expression in CD8+ T cells in response to hemagglutinin from avian influenza (H5N1) virus
|
SZU-MIN HSIEH; Hsieh, S.-M. and Chang, S.-C. |
| 臺大學術典藏 |
2020-12-29T06:37:32Z |
Cutting edge: Insufficient perforin expression in CD8+ T cells in response to hemagglutinin from avian influenza (H5N1) virus
|
SZU-MIN HSIEH; Chang S.-C.; Szu-Min Hsieh;Chang S.-C. |
| 臺大學術典藏 |
2020-12-30T02:44:03Z |
Cutting edge: Insufficient perforin expression in CD8+ T cells in response to hemagglutinin from avian influenza (H5N1) virus
|
Hsieh S.-M.;Shan-Chwen Chang; Hsieh S.-M.; SHAN-CHWEN CHANG |
| 臺大學術典藏 |
2018-09-10T05:54:23Z |
Cutting fluid aerosol generation in near-dry turning
|
Li, K.-M. and Liang, S.Y. |
| 臺大學術典藏 |
2022-03-22T15:05:29Z |
Cutting Flute and Thread Design on Self-Tapping Pedicle Screws Influence the Insertion Torque and Pullout Strength
|
Wu, Lien Chen; Hsieh, Yueh Ying; FON-YIH TSUANG; Kuo, Yi Jie; Chiang, Chang Jung |
| 臺大學術典藏 |
2022-09-21T03:14:45Z |
Cutting Flute and Thread Design on Self-Tapping Pedicle Screws Influence the Insertion Torque and Pullout Strength
|
Wu, LC; Hsieh, YY; FON-YIH TSUANG; Kuo, YJ; Chiang, CJ |
| 國立臺灣大學 |
1994 |
Cutting Force Components in Orthogonal Cutting Parallel to the Grain (90-0):I.Effects of Rake Angles
|
黃彥三 |
| 國立臺灣大學 |
1994 |
Cutting Force Components in Orthogonal Cutting Parallel to the Grain (90-0):II.Effects of Feed Lengths
|
黃彥三 |
| 國立臺灣科技大學 |
1994 |
Cutting Force Estimation
|
Lee K. Y.; Chuang H. Y. |
| 國立臺灣科技大學 |
1995 |
Cutting Force Estimation of Spindle Motor
|
Chang Y. C.; Lee K. U.; Chuang H. Y. |
| 國立交通大學 |
2017-04-21T06:48:23Z |
Cutting Force Monitoring and Control System for CNC Lathe Machines
|
Cubas, Jorge; Leoro, Josuet; Reyes, Daniel; Yeh, Syh-Shiuh |
| 國立臺灣大學 |
2010 |
Cutting force prediction in ball-end milling with inclined feed by means of geometrical analysis
|
Tsai, Chung-Liang; Liao, Yunn-Shiuan |
| 國立成功大學 |
2020-05 |
Cutting force validation and volumetric errors compensation of thin workpieces with sensory tool holder
|
Chen;Yu-Wen;Huang;Yao-Fu;Wu;Kuo-Tsai;Hwang;Sheng-Jye;Lee;Huei-Huang |
| 中國文化大學 |
2023-03 |
Cutting force, Vibration, and Temperature in Drilling on a Thermoplastic Material of PEEK
|
Chang, Dar-Yuan; Lin, Chien-Hung; Wu, Xing-Yao; Yang, Chun-Chun; Chou, Shan-Chao |
| 國立臺灣大學 |
1993 |
Cutting Forces Prediction with Runout Effects in Face Milling Operations
|
楊宏智; Chang, Y. S.; Young, Hong-Tsu; Chang, Y. S. |
| 國立臺灣大學 |
1995-06 |
Cutting Forces Predictions for Face Milling Under Runout Conditions
|
Young, H.T. |
| 國立成功大學 |
2008-10 |
Cutting management of riparian vegetation by using hydrodynamic model simulations
|
Leu, Jan-Mou; Chan, Hsun-Chuan; Jia, Yafei; He, Zhiguo; Wang, Sam S. Y. |
| 國立臺灣科技大學 |
2000 |
Cutting Parameter Selection for Maxmizing Production Rate or Minimizing Production Cost in Multistage Turning Operations
|
Lee, B.Y.;Tarng, Y.S. |
| 義守大學 |
2014-10 |
Cutting PCB with a 532nm DPSS green laser
|
Hsiang-Chen Hsu;Shih-Jeh Wu;Chih-Chiang Fu;Li-Ming Chu;Shen-Li Fu;Trong-Tai Nguyen |
| 臺大學術典藏 |
2018-09-10T14:50:47Z |
Cutting performance of diamond-like carbon coated tips in ultrasonic osteotomy
|
林俊彬;章浩宏; Lin, Ting-Chang; Lai, Cheng-Yu; Chen, Yen-Liang; Chang, Hao-Hueng; Lin, Chun-Pin; Liao, Y.-S.; Lin, T.-C.; Lai, C.-Y.; Chen, Y.-L.; Chang, H.-H.; Lin, C.-P.; Liao, Y.-S. and Lin, T.-C. and Lai, C.-Y. and Chen, Y.-L. and Chang, H.-H. and Lin, C.-P.; Liao, Yunn-Shiuan;Lin, Ting-Chang;Lai, Cheng-Yu;Chen, Yen-Liang;Chang, Hao-Hueng;Lin, Chun-Pin |
