| 義守大學 |
2010-09 |
Design and System Modeling of a Tri-Axial Microaccelerometer Using Piezoelectric Thin Films
|
Jyh-Cheng Yu;Chungda Lee;Chiaokai Chang |
| 國立高雄第一科技大學 |
2009.01 |
Design and System Modeling of a Tri-Axial Microaccelerometer Using Piezoelectric Thin Films
|
Yu, Jyh-Cheng;Lee, Chungda;Chang, Chiaokai; 余志成 |
| 臺大學術典藏 |
2011 |
Design and system performances of a dual-band 4-Port MIMO antenna for LTE applications
|
Lu, Y.-C.;Chan, Y.-C.;Li, H.-J.;Lin, Y.-C.;Lo, S.-C.;Chuang, G.C.-H.; Lu, Y.-C.; Chan, Y.-C.; Li, H.-J.; Lin, Y.-C.; Lo, S.-C.; Chuang, G.C.-H.; YI-CHENG LIN |
| 國立成功大學 |
2015-05-01 |
Design and techno-economic optimization of a stand-alone PV (photovoltaic)/FC (fuel cell)/battery hybrid power system connected to a wastewater-to-hydrogen processor
|
Wu, Wei; Christiana, Veni Indah; Chen, Shin-An; Hwang, Jenn-Jiang |
| 國立交通大學 |
2014-12-08T15:11:53Z |
Design and Test of a MEMS-Based High G Smart Sensor
|
Wang, Y. P.; Hsu, R. Q.; Wu, C. W. |
| 國立臺灣海洋大學 |
2011-04 |
Design and Test of a MEMS-Based High G Smart Sensor
|
Y.P. Wang; R.Q. Hsu; C.W. Wu |
| 臺大學術典藏 |
2020-04-16T02:35:39Z |
Design and test of a monolithic ultrasound-image-guided HIFU device using annular CMUT rings
|
PAI-CHI LI; Li, P.-C.; Cheng, J.-C.; Cheng, X.; Chen, J.; Wang, M. |
| 臺大學術典藏 |
2021-10-25T08:51:50Z |
Design and Test of a Near Zero-Energy Office
|
B.-J. Huang; P.-C. Hsu; Y.-H. Wang; J.-H. Tsai; K. Li; K.-Y. Lee; KANG LI |
| 臺大學術典藏 |
2020-05-14T06:59:09Z |
Design and Test of a Novel Coating Technology for Multilayer Ceramic Capacitor (MLCC),
|
Lai, S.-H.; Hsieh, Y.-W, Yen, Y.-K.; Wang, A.–B.; AN-BANG WANG; Chen, T.-L.; Liu, Y.-J. |
| 國立臺灣科技大學 |
2014 |
Design and test of a rapid thermal annealing furnace for improving surface properties of silicon brick in multi-wire sawing process
|
Chen C.-C.A., Cheng S.-C., Chan M.-H., Hsu W.-C., Cheng S.-L. |
| 國立交通大學 |
2014-12-08T15:33:48Z |
DESIGN AND TEST OF A SITUATION-AUGMENTED DISPLAY FOR AN UNMANNED AERIAL VEHICLE MONITORING TASK
|
Lu, Jen-Li; Horng, Ruey-Yun; Chao, Chin-Jung |
| 臺大學術典藏 |
2020-01-17T07:47:17Z |
Design and test of additive manufacturing for coating thermoplastic PEEK material
|
SHIU-WU CHAU;Luo, R.C.;Liu, B.H.;Wei, W.C.;Chau, S.W.;Lee, N.T.;Wang, A.B.;Zeng, J.W.;Sun, T.J.;Hsieh, Y.W.;Liu, C.Y.; Liu, C.Y.; Hsieh, Y.W.; Sun, T.J.; Zeng, J.W.; Wang, A.B.; Lee, N.T.; Chau, S.W.; Wei, W.C.; Liu, B.H.; Luo, R.C.; SHIU-WU CHAU |
| 臺大學術典藏 |
2020-04-28T07:11:06Z |
Design and test of additive manufacturing for coating thermoplastic PEEK material
|
Liu, C.Y.; Hsieh, Y.W.; Sun, T.J.; Zeng, J.W.; Wang, A.B.; Lee, N.T.; Chau, S.W.; Wei, W.C.; Liu, B.H.; Luo, R.C.; AN-BANG WANG |
| 臺大學術典藏 |
2020-05-05T08:40:22Z |
Design and test of additive manufacturing for coating thermoplastic PEEK material
|
Liu C.Y.; Hsieh Y.W.; Sun T.J.; Zeng J.W.; Wang A.B.; Lee N.T.; Chau S.W.; Wei W.C.; Liu B.H.; Luo R.C.; AN-BANG WANG |
| 臺大學術典藏 |
2020-05-12T02:54:10Z |
Design and test of additive manufacturing for coating thermoplastic PEEK material
|
WEN-CHENG J. WEI; Luo, R.C.; Liu, B.H.; Liu, C.Y.; Hsieh, Y.W.; Sun, T.J.; Zeng, J.W.; Wang, A.B.; Lee, N.T.; Chau, S.W.; Wei, W.C. |
| 臺大學術典藏 |
1993-10 |
Design and test of memory management unit and cache controller chip
|
Hsieh, David; Lai, Fei-Pei; Hsieh, David; Lai, Fei-pei |
| 國立臺灣大學 |
1993-10 |
Design and test of memory management unit and cache controller chip
|
Hsieh, David; Lai, Fei-pei |
| 中華大學 |
2004 |
Design and test of micro catalytic combustors for use in microthrusters
|
鄭藏勝; Cheng, T. S. |
| 中華大學 |
2007 |
Design and Test of Microfabricated Strain Gauge for the Application of Flexible PU Heart Valve Membrane
|
林育立; Lin, Yuli |
| 臺大學術典藏 |
2020-05-14T06:59:26Z |
Design and Test of PEEK Material for Additive Manufacturing
|
An-Bang Wang; Shiou-Wu Chau; Ren-Chiuan Lou; Wen-Cheng Wei; Hao-Chih Liu; Chao-Yuan Liu; Yu-Wen Hsieh; Jian-Wei Tseng; Ta-Ju Sun; Nien-Tse Lee; AN-BANG WANG |
| 元智大學 |
2012-10-24 |
Design and test of planar transformer using CMOS technology with BALUN applications
|
Chien-Chang Huang; Wei-Di Tu; Chia-Kai Chen |
| 元智大學 |
2012-10-24 |
Design and test of planar transformer using CMOS technology with BALUN applications
|
Chien-Chang Huang; Wei-Di Tu; Chia-Kai Chen |
| 朝陽科技大學 |
2020 |
Design and Test of Quad Cane Structure Design
|
趙方麟 |
| 元智大學 |
2011-08 |
Design and test of RF front end for UHF RFID tag
|
Chien-Chang Huang; Kai-Wei Ku |
| 元智大學 |
2011-08 |
Design and test of RF front end for UHF RFID tag
|
Chien-Chang Huang; Kai-Wei Ku |
| 臺大學術典藏 |
1995 |
Design and test results of a transition radiation detector for a Fermilab fixed target rare kaon decay experiment
|
YEE HSIUNG; YEE HSIUNG; YEE HSIUNG |
| 臺大學術典藏 |
2019-12-30T00:37:42Z |
Design and test results of a transition radiation detector for a Fermilab fixed target rare kaon decay experiment
|
Graham, G.E.; Graham, G.E.; YEE HSIUNG et al. |
| 國立成功大學 |
2000-01 |
Design and testing of a genetic algorithm neural network in the assessment of gait patterns
|
Su, Fong-Chin; Wu, Wen-Lan |
| 南台科技大學 |
2018-04-13 |
Design and testing of a high-performance range hood
|
Chia-Hsiang Su; Cheng-Wei Wu; Li-Ming Chu |
| 臺大學術典藏 |
2006 |
Design and testing of a multi- electrode electro-rheological damper
|
Kuo, W.H.; Wu, T.N.; Guo, J.; 江茂雄; Chen, Y.N.; Kuo, W.H.; Wu, T.N.; Guo, J.; 江茂雄; Chen, Y.N. |
| 國立臺灣大學 |
2006 |
Design and testing of a multi- electrode electro-rheological damper
|
Kuo, W.H.; Wu, T.N.; Guo, J.; 江茂雄; Chen, Y.N. |
| 臺大學術典藏 |
2021-02-04T02:48:48Z |
Design and Testing of a New Vascular Stent with Enhanced Fatigue Life
|
Ho, K.-L.; Hung, M.-Y.; Chen, J.-H.; Jian, Y.-M.; Hsiao, H.-M.; Ho, K.-L.; Hung, M.-Y.; Chen, J.-H.; Jian, Y.-M.; Hsiao, H.-M.; HAO-MING HSIAO |
| 臺大學術典藏 |
2020-01-13T08:20:53Z |
Design and testing of a novel catalytic reactor to generate hydrogen
|
JING-TANG YANG;Yang, J.-T.;Lai, Y.-H.;Lu, M.-T.;Chen, Y.-T.;Li, H.-Y.; Li, H.-Y.; Chen, Y.-T.; Lu, M.-T.; Lai, Y.-H.; Yang, J.-T.; JING-TANG YANG |
| 國立交通大學 |
2014-12-08T15:43:41Z |
Design and testing of a personal porous-metal denuder
|
Tsai, CJ; Huang, CH; Wang, SH; Shih, TS |
| 臺大學術典藏 |
2005 |
Design and Testing of A Pneumatic Microfluidic Valve
|
AN-BANG WANG; Y.-H. Wang; I.-C. Lin; K.-C. Lee; A.–B. Wang |
| 國立臺灣科技大學 |
2007 |
Design and testing of a separate-type lighting system using solar energy and cold-cathode fluorescent lamps
|
Yang, J.-P.;Hsiao, H.-C. |
| 國立成功大學 |
2013-11-04 |
Design and testing of a uniformly solar energy TIR-R concentration lenses for HCPV systems
|
Shen, S. C.; Chang, S. J.; Yeh, C. Y.; Teng, P. C. |
| 國立成功大學 |
2022-09 |
Design and Testing of Real-Time Sensing System Used in Predicting the Leakage of Subsea Pipeline
|
Chen;Yung-Hsu;Shen;Sheng-Chih;Wu;Yan-Kuei;Lee;Chun-Yen;Chen;Yen-Ju |
| 國立交通大學 |
2016-03-28T00:04:14Z |
Design and Testing of the NCTU Micro-Orifice Cascade Impactor (NMCI) for the Measurement of Nanoparticle Size Distributions
|
Chien, Chih-Liang; Tien, Chi-Yu; Liu, Chun-Nan; Ye, Huajun; Huang, Wei; Tsai, Chuen-Jinn |
| 淡江大學 |
2000-01 |
Design and Thermal Safety Assessment of a Liquefied-Petroleum-Gas Tank Lorry
|
Chen, Hsi-jen; Chang, Sue-hsuan |
| 國立成功大學 |
2016-03-01 |
Design and thermodynamic analysis of a hybrid power plant using torrefied biomass and coal blends
|
Kuo, Po-Chih; Wu, Wei |
| 國立成功大學 |
2013-11 |
Design and usability testing of a learning and plagiarism avoidance tutorial system for paraphrasing and citing in English: A case study
|
Liu, Gi-Zen; Lo, Hsiang-Yee; Wang, Hei-Chia |
| 南台科技大學 |
2008-04 |
Design and Validate of a Scale Anchoring Based Test Items Library
|
張儀興; Yi-Hsing Chang; Shih-Feng Hsu; Rong-Jyue Fang |
| 國立臺灣科技大學 |
2008 |
Design and validation of a desk-free and posture independent input device
|
Lee, Y. H. ; Sue, M. S |
| 國立臺灣科技大學 |
2008 |
Design and validation of a desk-free and posture-independent input device
|
Lee, Y.-H.;Su, M.-C. |
| 國立成功大學 |
2023-07 |
Design and validation of a microalgae biorefinery using machine learning-assisted modeling of hydrothermal liquefaction
|
Wu;Wei;Huang;-Ming, Cheng;Tsai;Yu-Hsun |
| 國家衛生研究院 |
2019-10-31 |
Design and validation of a multifunctional android-based smart home control and monitoring system
|
Liao, LD;Chuang, CC;Ger, TR;Wang, Y;Tsao, YC;Wang, IJ;Jhang, DF;Chu, TS;Tsao, CH;Tsai, CN;Chen, SF |
| 國立交通大學 |
2019-04-02T05:59:50Z |
Design and Validation of a New PPG Module to Acquire High-Quality Physiological Signals for High-Accuracy Biomedical Sensing
|
Kao, Yung-Hua; Chao, Paul C-P; Wey, Chin-Long |
| 淡江大學 |
2021-10-27 |
Design and Validation of a Virtual Chemical Laboratory – An Example of Natural Science in Elementary Education
|
Tsai, Chi-Yi;Ho, Yu-Chen;Nisar, Humaira |
| 淡江大學 |
2021-10-27 |
Design and Validation of a Virtual Chemical Laboratory – An Example of Natural Science in Elementary Education
|
Chi-Yi Tsai, Yu-Chen Ho and Humaira Nisar |
