| 南台科技大學 |
2001 |
Design of Wireless Power and Data Transmission for Nerve Cuff Stimulation
|
C. K. Chen; Jia-Jin J. Chen; 梁治國; Chih-Kuo Liang |
| 國立臺灣大學 |
2010 |
Design of wireless sensor network and its application for structural health monitoring of cable-stayed bridge
|
Lin, H.R.; Chen, C.S.; Chen, P.Y.; Tsai, F.J.; Huang, J.D.; Li, J.F.; Lin, C.T.; Wu, W.J. |
| 臺大學術典藏 |
2019-12-10T03:44:28Z |
Design of wireless sensor network and its application for structural health monitoring of cable-stayed bridge
|
Lin, H.R.; Chen, C.S.; Chen, P.Y.; Tsai, F.J.; Huang, J.D.; Li, J.F.; Lin, C.T.; Wu, W.J.; CHUIN-SHAN CHEN |
| 臺大學術典藏 |
2020-06-11T06:27:02Z |
Design of wireless sensor network and its application for structural health monitoring of cable-stayed bridge
|
Lin, H.R.;Chen, C.S.;Chen, P.Y.;Tsai, F.J.;Huang, J.D.;Li, J.F.;Lin, C.T.;Wu, W.J.; Lin, H.R.; Chen, C.S.; Chen, P.Y.; Tsai, F.J.; Huang, J.D.; Li, J.F.; Lin, C.T.; Wu, W.J.; CHIH-TING LIN |
| 元智大學 |
2003-12 |
Design of Wrapper Cell for Testing of Crosstalk in SOC interconnects
|
曾王道; Deng-Yun Gan |
| 元智大學 |
2006-12 |
Design of Wrapper Cells for Testing of Crosstalk Faults in SOC Buses
|
曾王道 |
| 國立政治大學 |
1997 |
Design of X Control Chart for Short Production Runs
|
楊素芬 |
| 國立政治大學 |
1997 |
Design of X Control Chart for Short Production Runs
|
楊素芬 |
| 國立交通大學 |
2014-12-08T15:08:08Z |
Design of X-band complementary metal-oxide semiconductor-based frequency-modulation continuous-wave sensor
|
Chang, C. -H.; Wang, S.; Wu, H. -S.; Liang, E. -C.; Liu, A. -S.; Tsai, K. -H.; Chiang, M. -J.; Yang, P. -J.; Wu, Y. -J.; Lee, H.; Tzuang, C. -K. C. |
| 國立臺灣大學 |
2009 |
Design of X-Band RF CMOS Transceiver for FMCW Monopulse Radar
|
Wang, Sen; Tsai, Kun-Hung; Huang, Kuo-Ken; Li, Si-Xian; Wu, Hsien-Shun; Tzuang, C.-K.C. |
| 國立高雄師範大學 |
2009-11 |
Design of Zero Reference Codes Using Cross-Entropy Method
|
陳榮杰; Jung-Chieh Chen |
| 國立成功大學 |
2006-06-15 |
Design of ZnO/Ag/ZnO multilayer transparent conductive films
|
Sahu, Diptiranjan; Huang, Jow-Lay |
| 臺大學術典藏 |
2010 |
Design of zone configuration scheme for wireless zone-based multicast and broadcast service
|
Hu, K.-H.;Fu, H.-L.;Lin, P.; Hu, K.-H.; Fu, H.-L.; Lin, P.; PHONE LIN |
| 臺大學術典藏 |
2010 |
Design of zone configuration scheme for wireless zone-based multicast and broadcast service.
|
Fu, Huai-Lei; Hu, Kai-Hsiang; Hu, Kai-Hsiang;Fu, Huai-Lei;Lin, Phone; Lin, Phone; PHONE LIN |
| 國立暨南國際大學 |
2011 |
Design of zone-based bandwidth management scheme in IEEE 802.16 multi-hop relay networks
|
Chen, KY; Chen, KY |
| 國立交通大學 |
2014-12-08T15:26:51Z |
Design on ESD protection circuit with very low and constant input capacitance
|
Chen, TY; Ker, MD |
| 國立交通大學 |
2014-12-08T15:38:45Z |
Design on ESD protection scheme for IC with power-down-mode operation
|
Ker, MD; Lin, KH |
| 國立交通大學 |
2019-04-02T06:04:44Z |
Design on LVDS receiver with new delay-selecting technique for UXGA flat panel display applications
|
Ker, Ming-Dou; Wu, Chien-Hua |
| 義守大學 |
2015-06 |
Design on MEMS-based 3D biochip for drug-released dispenser
|
Hsiang-Chen Hsu;Li-Ming Chu;Baojun Liu;Chien-Yuan Lai |
| 國立交通大學 |
2014-12-08T15:25:23Z |
Design on mixed-voltage I/O buffer with blocking NMOS and dynamic gate-controlled circuit for high-voltage-tolerant applications
|
Ker, MD; Chen, SL; Tsai, CS |
| 國立交通大學 |
2014-12-08T15:16:38Z |
Design on mixed-voltage I/O buffers with consideration of hot-carrier reliability
|
Ker, Ming-Dou; Hu, Fang-Ling |
| 國立交通大學 |
2014-12-08T15:24:49Z |
Design on new tracking circuit of I/O buffer in 0.13-mu m cell library for mixed-voltage application
|
Chen, Zi-Ping; Chuang, Che-Hao; Ker, Ming-Dou |
| 國立交通大學 |
2014-12-08T15:15:40Z |
Design on power-rail ESD clamp circuit for 3.3-V I/O interface by using only 1-V/2.5-V low-voltage devices in a 130-nm CMOS process
|
Ker, Ming-Dou; Chen, Wen-Yi; Hsu, Kuo-Chun |
| 國立交通大學 |
2014-12-08T15:25:22Z |
Design on power-rail ESD clamp circuit for 3.3-V I/O interface by using only 1-V/2.5-V low-voltage devices in a 130-nm CMOS process
|
Ker, MD; Chen, WY; Hsu, KC |
| 國立交通大學 |
2014-12-08T15:43:10Z |
Design on the low-capacitance bond pad for high-frequency I/O circuits in CMOS technology
|
Ker, MD; Jiang, HC; Chang, CY |
| 國立交通大學 |
2014-12-08T15:45:27Z |
Design on the low-leakage diode string for using in the power-rail ESD clamp circuits in a 0.35-mu m silicide CMOS process
|
Ker, MD; Lo, WY |
| 國立屏東大學 |
2011 |
Design optimal control of ship maneuver patterns for conllision avoidance : a review
|
陳震遠;C.H.Shih;Huang, Po-Hsuan;Yamamura, Saburo |
| 淡江大學 |
2009-10 |
Design Optimization and Analysis Applying DOE for Intake and Exhaust Pipeline of a Motorcycle
|
史建中 |
| 義守大學 |
2016-01 |
Design Optimization and Implementation of Genetic-Based Moving Sliding Manifold Strategy for Parallel Operation of DC-AC Converters
|
En-Chih Chang;Hairong Wang;Kuo-Yuan Liao;Rong-Ching Wu |
| 國立臺灣科技大學 |
2017 |
Design optimization considering guiding template feasibility and redundant via insertion for directed self-assembly
|
Fang, S.-Y;Hong, Y.-X. |
| 國立臺灣科技大學 |
2017 |
Design Optimization Considering Guiding Template Feasibility and Redundant Via Insertion for Directed Self-Assembly
|
Lin, K.-L.;Fang, S.-Y.;Hong, Y.-X. |
| 臺大學術典藏 |
2021-09-14T23:19:16Z |
Design optimization for ADMM-Based SVM Training Processor for Edge Computing
|
Huang, Shuo An; Hsieh, Yi Yen; CHIA-HSIANG YANG |
| 臺大學術典藏 |
2022-04-25T06:41:37Z |
Design optimization for ADMM-Based SVM Training Processor for Edge Computing
|
Huang S.-A;Hsieh Y.-Y;Yang C.-H.; Huang S.-A; Hsieh Y.-Y; Yang C.-H.; CHIA-HSIANG YANG |
| 臺大學術典藏 |
2000 |
Design optimization for an LPG automobile engine
|
Jaw, Shenq-Yuh; Wu, Tzann-Dwo;Chen, Yih-Nan;Yen, Jia-Yush;Jaw, Shenq-Yuh; Wu, Tzann-Dwo; Chen, Yih-Nan; Yen, Jia-Yush |
| 國立臺灣大學 |
2000 |
Design optimization for an LPG automobile engine
|
Wu, Tzann-Dwo; Chen, Yih-Nan; Yen, Jia-Yush; Jaw, Shenq-Yuh |
| 臺大學術典藏 |
2018-09-10T04:33:06Z |
Design optimization for asymmetrical ZVS-PWM Zeta converter
|
Wu, T.-F.; Liang, S.-A.; Chen, Y.-M.; YAOW-MING CHEN |
| 國立臺灣科技大學 |
2009-11-02 |
Design Optimization for Cogging Torque Minimization and Efficiency Maximization of a High-speed PM Motor
|
Hwang, Chang-Chou; Chang, Chia-Ming; Li, Ping-Lun |
| 臺大學術典藏 |
1993 |
Design optimization for high power and high speed surface-emitting lasers
|
Gamelin, J;Lin, J;Lau, KY;Hong, M;Mannaerts, JP; Gamelin, J; Lin, J; Lau, KY; Hong, M; Mannaerts, JP; MINGHWEI HONG |
| 修平科技大學 |
2005 |
Design Optimization for Pin-Fin Heat Sinks
|
Chen, H. T.;Chen, P. L.;Horng, J. T.;Hung, Y. H. |
| 臺大學術典藏 |
2019-07-03T07:15:32Z |
Design optimization for the hybrid power system of a green building
|
Wang F.-C.;Chen P.-J.; Chen P.-J.; Wang F.-C. |
| 國立臺灣科技大學 |
2015 |
Design optimization for ultrahigh efficiency buck regulator using wide bandgap devices
|
Lai, J.-S;Lin, C.-Y;Liu, Y.-C;Zhang, L;Zhao, X. |
| 國立交通大學 |
2015-07-21T08:31:14Z |
Design Optimization of 16-nm Bulk FinFET Technology via Geometric Programming
|
Su, Ping-Hsun; Li, Yiming |
| 國立交通大學 |
2018-08-21T05:56:36Z |
Design Optimization of a 1.4 GHz Low Power Bulk-Driven Mixer
|
Li, Chun-Hsing; Kuo, Chien-Nan |
| 臺大學術典藏 |
2020-08-05T02:45:34Z |
Design optimization of a 1.4 GHz low power bulk-driven mixer
|
Chun-Hsing Li;Chien-Nan Kuo;CHUN-HSING LI; Chun-Hsing Li; Chien-Nan Kuo; CHUN-HSING LI; CHUN-HSING LI |
| 臺大學術典藏 |
2020-02-26T01:36:45Z |
Design Optimization of a Compliant Revolute Joint
|
Wu, J.-M.;Shih, P.-J.;Lee, J.-J.Po-Jen Shih; Wu, J.-M.; Shih, P.-J.; Lee, J.-J.; PO-JEN SHIH |
| 國立交通大學 |
2014-12-08T15:42:07Z |
Design optimization of a current mirror amplifier integrated circuit using a computational statistics technique
|
Li, Yiming; Li, Yih-Lang; Yu, Shao-Ming |
| 元智大學 |
2013-11-15 |
Design Optimization of an Industrial Muffler by Taguchi Method
|
Tachung Yang; Sheng-Shian Tsai |
| 元智大學 |
2014-3-1 |
Design Optimization of an Industrial Muffler by Taguchi Method
|
Tachung Yang; Sheng-Shian Tsai |
| 國立高雄第一科技大學 |
2007.02 |
Design optimization of cutting parameters for side milling operations with multiple performance characteristics
|
Chang, Ching-Kao;H.S.Lu; 張清靠 |
| 國立臺灣科技大學 |
1998 |
Design Optimization of Cutting Parameters for Turning Operations Based on the Taguchi Method
|
Yang, W.H.;Tarng, Y.S. |
