| 國立成功大學 |
2018-07-1 |
Fabrication of Ba1-xZnO2 nanowires using solvothermal synthesis: Piezotronic and piezophototronic performance characterization
|
Chiang;Yi-Chai;Chang;Kao-Shuo |
| 義守大學 |
2015-06 |
Fabrication of Bacteria-imprinted Polymer Coated Electrodes for Microbial Fuel Cells
|
Mei-Hwa Lee;James L. Thomas;Wen-Janq Chen;Ming-Huan Li;Ching-Ping Shih;Hung-Yin Lin |
| 國立成功大學 |
2014-01 |
Fabrication of ball-strip convex microlens array using seamless roller mold patterned by curved surface lithography technique
|
Tsai, Sung-Wen; Lee, Yung-Chun |
| 南台科技大學 |
2022-12 |
Fabrication of Beta-Barium Borate Sensing Head for Non-Invasive Measurement of Fluidic Concentration Variations
|
Ruey-Ching Twu;Yi-Ren Sun |
| 大葉大學 |
2007-11 |
Fabrication of Bi-layers Porous Glass-ceramic Scaffolds Using the Replication Methods
|
Lin, H.C.;Li, T.P.;Ho, W.F.;Hsu, H.C.;Wu, S.C. |
| 國立臺灣大學 |
1998 |
Fabrication of Biepitaxial YBa2Cu3O7-y Josephson Junctions and SQUIDS
|
Yang, S. Y.; Horng, H. E.; Lee, W. L.; Yu, H. W.; Yang, H. C. |
| 元智大學 |
2009-08 |
Fabrication of bimetallic Pt-M (M = Fe, Co, and Ni) nanoparticle/carbon nanotube electrocatalysts for direct methanol fuel cells
|
謝建德; 林嘉儀 |
| 國立成功大學 |
2022-01-1 |
Fabrication of binary Ag3PO4 photocatalysts for enhanced photocatalytic degradation: Effect of PEDOT hole conductor and hybridized 1 T-containing MoS2 electron conductor
|
Sari;Indah, Fitri Nur;Syue;Ming-Tong;Purba;Yemima;Ting;Jyh-Ming |
| 臺大學術典藏 |
2018-09-10T08:18:50Z |
Fabrication of Binary Phase Grating On the Fiber End by Using Two-Beam Interference lithography
|
Ching-Tung Tseng;Tz-Shiuan Peng;Yung-Pin Chen;Jui-Chen Tsai;Lon A. Wang; Ching-Tung Tseng; Tz-Shiuan Peng; Yung-Pin Chen; Jui-Chen Tsai; Lon A. Wang; LON A. WANG |
| 國立成功大學 |
2021-03 |
Fabrication of bio-based polyamide 56 and antibacterial nanofiber membrane from cadaverine
|
Xue;Chengfeng;Hsu;Kai-Min;Chiu;Chen-Yaw;Chang;Yu-Kaung;Ng;I-Son |
| 國家衛生研究院 |
2013-09 |
Fabrication of bioactive conduits containing the fibroblast growth factor 1 and neural stem cells for peripheral nerve regeneration across a 15 mm critical gap
|
Ni, HC;Tseng, TC;Chen, JR;Hsu, SH;Chiu, IM |
| 臺大學術典藏 |
2018-09-10T09:43:00Z |
Fabrication of bioactive conduits containing the fibroblast growth factor 1 and neural stem cells for peripheral nerve regeneration across a 15 mm critical gap
|
Ni, H.-C.; Tseng, T.-C.; Chen, J.-R.; Hsu, S.-H.; Chiu, I.-M.; SHAN-HUI HSU |
| 國立成功大學 |
2023 |
Fabrication of bioactive glass scaffolds by stereolithography: Influence of particle size and surfactant concentration
|
Chiu, K.-Y.;Huang, C.-L.;Huang, J.-Y.;Lee, T.-M.;Dong, G.-C.;Chen, K.-K.;Wang, Y.-H. |
| 國家衛生研究院 |
2023-01-14 |
Fabrication of bioactive glass scaffolds by stereolithography: Influence of particle size and surfactant concentration
|
Chiu, KY;Huang, CL;Huang, JY;Lee, TM;Dong, GC;Chen, KK;Wang, YH |
| 臺大學術典藏 |
2018-09-10T15:18:28Z |
Fabrication of biodegradable polyurethane microspheres by a facile and green process
|
Lin, C.-Y.; Hsu, S.-H.; SHAN-HUI HSU |
| 國立交通大學 |
2014-12-08T15:28:33Z |
Fabrication of biomimetic device with PS-b-PNIPAAm copolymer pillars mimicking a gecko foot pad
|
Chen, Jem-Kun; Wang, Jing-Hong; Cheng, Chih-Chia; Ko, Fu-Hsiang |
| 國立臺灣科技大學 |
2012 |
Fabrication of biomimetic device with PS-b-PNIPAAm copolymer pillars mimicking a gecko foot pad
|
Chen, J.-K.;Wang, J.-H.;Cheng, C.-C.;Ko, F.-H. |
| 臺大學術典藏 |
2020-01-13T08:23:30Z |
Fabrication of biomimetic dry-adhesion structures through nanosphere lithography
|
Kuo, P. C.; Chang, N. W.; Suen, Y.; Yang, S. Y.; SEN-YEU YANG |
| 南台科技大學 |
2017 |
Fabrication of Biomimetic Gecko Toe Pads and Their Characterization
|
S. Adriana Estrada A.; Hong-Ru Lin |
| 國立交通大學 |
2014-12-08T15:17:08Z |
Fabrication of biomimetic super-amphiphobic surfaces through plasma modification of benzoxazine films
|
Wang, CF; Chiou, SF; Ko, FH; Chou, CT; Lin, HC; Huang, CF; Chang, FC |
| 義守大學 |
2016-04 |
Fabrication of biomimetic superhydrophobic surfaces through a one step solution-immersion process on galvanized iron substrates
|
Chih-Feng Wang;Li-Zhen Huang;Liang-Ting Chen;Sheng-Yi Yang;Chiung-Chih Shih |
| 南台科技大學 |
2009 |
Fabrication of Bionic Butterfly Wing Microstructure Using Injection Molding Lithography
|
戴子堯; S. H. Kang; T. Y. Tai; T. H. Fang |
| 國立聯合大學 |
2008 |
Fabrication of Bismuth Nanoballs by Thermal Oil Reflow
|
Chin-Guo Kuo, Chien-Chon Chen*, Sheng-Jen Hsieh, Wen C. Say |
| 國立交通大學 |
2014-12-08T15:10:44Z |
Fabrication of bismuth nanoballs using thermal oil reflow
|
Kuo, Chin-Guo; Chen, Chien-Chon; Hsieh, Sheng-Jen; Say, Wen C. |
| 國立交通大學 |
2014-12-08T15:47:43Z |
Fabrication of bismuth oxide-tin oxide nanowires by direct thermal oxidation of Bi-Sn eutectic nanowires
|
Chen, Shih-Hsun; Wang, Chiu-Yen; Liu, Tzeng-Feng; Chao, Chuen-Guang |
| 國立臺灣科技大學 |
2017 |
Fabrication of black silicon anti-reflection via nanocatalytic wet-chemical etch
|
Ho, V.T.T;Giang, B.L;Hong, L.-S;Nguyen, Nguyen N.G. |
| 國立臺灣大學 |
2002 |
Fabrication of Blue GaN Light-Emitting Diodes by Laser Etching
|
Yang, Fu-Hsiang; Hsiao, Chao-Jen; Yang, Ying-Jay; Lin, Jun-Hong; Wang, Lon |
| 臺大學術典藏 |
2018-09-10T04:15:52Z |
Fabrication of blue GaN light-emitting diodes by laser etching
|
Y. J. Yang; J. H. Lin; L. Wang; YING-JAY YANG; F. H. Yang; C. J. Hsao |
| 國立交通大學 |
2014-12-08T15:37:21Z |
Fabrication of blue top-emitting organic light-emitting devices with highly saturated color
|
Hsu, SF; Lee, CC; Hu, AT; Chen, CH |
| 國立交通大學 |
2015-07-21T08:31:01Z |
Fabrication of boron-doped diamond-like carbon (BDDLC) electrode and its applications for the measurements of Hg2+, Cu2+, and Pb2+ ions in aqueous solutions
|
Juang, Yaju; Nurhayati, Ervin; Huang, Chihpin; Hu, Chi-Chang; Rajkumar, Muniyandi |
| 國立臺灣科技大學 |
2019 |
Fabrication of branched polyethylenimin/alginic acid/poly(cyclohexane-1,4-diyl acetone dimethylene ketal as a nano size carrier for controlled release of 5-fluorouracil
|
Chen, P.-C.;Yii, D.;Tsai, H.-C.;Parasuraman, V.R.;Prasannan, A.;Kao, C.-Y.;Lai, J.-Y. |
| 臺大學術典藏 |
2020-01-13T08:23:24Z |
Fabrication of buried waveguide microstructure using gas-assisted micro/nanoimprinting with soft mold
|
Weng, Y.-J.; Yang, S.-Y.; Weng, Y.-C.; Wang, L.A.; SEN-YEU YANG |
| 國立交通大學 |
2014-12-08T15:27:05Z |
Fabrication of cantilever type microswitches using surface micromachining technology
|
Chang, KM; Jou, CF; Luo, JJ; Kuo, LY; Deng, IC; Liang, C; Luhmann, NC |
| 國立中山大學 |
1996 |
Fabrication of CaO-ZrO2-TiO2-Al2O3-B2O3-SiO2 Glasses and Glass Ceramics (I)
|
J.S. Lin;P. Shen |
| 國立成功大學 |
2024-10-19 |
Fabrication of Carbon Cloth-Enrobed MnFe2O4@PPy Nanoparticles for a Flexible Symmetric Supercapacitor Device
|
Devi;Rama;Patra;Jagabandhu;Tapadia;Kavita;Sutar;Kumar, Alekha;Chang;Jeng-Kuei;Maharana;Tungabidya |
| 國立臺灣科技大學 |
2012 |
Fabrication of carbon microcoil/polyaniline composite by microemulsion polymerization for electrochemical functional enhancement
|
Shown, Indrajit;Imae, Toyoko;Motojima, Seiji |
| 國立臺灣科技大學 |
2012 |
Fabrication of carbon microcoil/polyaniline composite by microemulsion polymerization for electrochemical functional enhancement
|
Shown, I.;Imae, T.;Motojima, S. |
| 國立臺灣海洋大學 |
2013-09 |
Fabrication of Carbon Nano-Sheets for Heat Dissipation in a High Power Light Emitting Diode
|
Jeff Tsung-Hui Tsai*;Chi-Jen Kuo;Fu-Lin Yang;Fu-Cheng Wang;Hong-Sen Kou |
| 國立交通大學 |
2016-03-28T00:04:16Z |
Fabrication of carbon nanotube/cobalt oxide nanocomposites via electrophoretic deposition for supercapacitor electrodes
|
Kumar, Nagesh; Yu, Yun-Cheng; Lu, Yi Hsuan; Tseng, Tseung Yuen |
| 國立東華大學 |
2010 |
Fabrication of Carbon Nanotubes Field Emission Cathode by Composite Plating
|
Wang F. H.; T. C. Lin; S. D. Tzeng |
| 國立臺灣科技大學 |
2010 |
Fabrication of carbon nanotubes field emission cathode by composite plating
|
Wang F.-H.; Lin T.-C.; Tzeng S.-D. |
| 國立成功大學 |
2005-01 |
Fabrication of Carbon Nanotubes on Ni-cap Electron Emitters by Using Prenucleation Technique
|
Chen, Yi-Chun; Tsau, You-Ming; Hsieh, Yun-Shuo; Cheng, Hsiu-Fung; Lin, I-Nan |
| 國立交通大學 |
2014-12-08T15:38:23Z |
Fabrication of Cd(1-x)Zn(x)S films with controllable zinc doping using a vapor zinc chloride treatment
|
Xia, Wei; Welt, Jonathan A.; Lin, Hao; Wu, Hsiang N.; Ho, Meng H.; Tang, Ching W. |
| 國立交通大學 |
2019-04-02T06:00:22Z |
Fabrication of Cd1-xZnxS films with controllable zinc doping using a vapor zinc chloride treatment
|
Xia, Wei; Welt, Jonathan A.; Lin, Hao; Wu, Hsiang N.; Ho, Meng H.; Tang, Ching W. |
| 大葉大學 |
2005-12-15 |
Fabrication of CdS@TiO2 coaxial composite nanocables arrays by liquid-phase deposition
|
Hsu, M C;Leu, I C;Sun, Y M;Hon, M H |
| 國立成功大學 |
2005-12-15 |
Fabrication of CdS@TiO2 coaxial composite nanocables arrays by liquid-phase deposition
|
Hsu, Ming-Chi; Leu, Ing-Chi; Sun, Yu-Ming; Hon, Min-Hsiung |
| 義守大學 |
2013-07 |
Fabrication of Ce-doped fibers by using rod-in-tube technique with drawing tower
|
Fang-Yen Lo;Chun-Nien Liu;Yi-Chung Huang;Wei-Lun Wang;Yen-Sheng Lin;Ta-Lung Chou;PiLing Huang;Sheng-Lung Huang;Wood-Hi Cheng |
| 臺大學術典藏 |
2018-09-10T09:47:41Z |
Fabrication of Ce-doped fibers by using rod-in-tube technique with drawing tower
|
Lo, F.-Y.;Liu, C.-N.;Huang, Y.-C.;Wang, W.-L.;Lin, Y.-S.;Chou, T.-L.;Huang, P.;Huang, S.-L.;Cheng, W.-H.; Lo, F.-Y.; Liu, C.-N.; Huang, Y.-C.; Wang, W.-L.; Lin, Y.-S.; Chou, T.-L.; Huang, P.; Huang, S.-L.; Cheng, W.-H.; SHENG-LUNG HUANG |
| 南台科技大學 |
2006 |
Fabrication of Ce0.8Sm0.2O1.9-intermediate temperature SOFCs electrolyte by hydrothermal method
|
吳文昌; 吳文昌 ;詹清棋 ; |
| 國立臺灣科技大學 |
2014 |
Fabrication of ceria particles using glycine nitrate spray pyrolysis
|
Shih, S.-J.;Tzeng, W.-L.;Kuo, W.-L. |
