| 義守大學 |
2009-03 |
Optimal design of antireflection coating and experimental verification by plasma enhanced chemical vapor deposition in small displays
|
S. M. Yang;Y. C. Hsieh;C. A. Jeng |
| 國立成功大學 |
2010-01-31 |
Optimal design of baffles locations with interdigitated flow channels of a centimeter-scale proton exchange membrane fuel cell
|
Jang, Jiin-Yuh; Cheng, Chin-Hsiang; Huang, Yu-Xian |
| 國立交通大學 |
2014-12-08T15:18:14Z |
Optimal design of CMOS pseudoactive pixel sensor (PAPS) structure for low-dark-current and large-array-size imager applications
|
Shih, YC; Wu, CY |
| 國立臺灣大學 |
2005 |
Optimal Design of Complex Two-Channel IIR QMF Banks with Equiripple Response
|
Lee, Ju-Hong; Yang, Yuan-Hau |
| 臺大學術典藏 |
2018-09-10T05:26:44Z |
Optimal Design of Complex Two-Channel IIR QMF Banks with Equiripple Response
|
Ju-Hong Lee; Y.-H. Yang; JU-HONG LEE |
| 中原大學 |
2010-05 |
Optimal Design of Continuous Double-Pass Thermal-Diffusion Columns with
|
Chii-Dong Ho; Ho-Ming Yeh; Jia-Jan Guo; Jr-Wei Tu and Ching-Jung Chuang |
| 義守大學 |
2015-08 |
Optimal Design of Continuous Reinforced Concrete Beams using Neural Networks
|
Jiin-Po Yeh;Ren-Pei Yang |
| 淡江大學 |
2007 |
Optimal Design of Corrugated Cellular Plastic Foam with Semi-elliptical Shaped Upper Surface by Finite Element Frequency Domain Acoustic Analysis
|
蔡慧駿; Tsay, Huoy-shyi; Yeh, Fung-huei |
| 國立聯合大學 |
2007 |
Optimal design of coupling waveguide structure for adiabati coptical directional full couplers weighted by sin-square and raised-cosine functions
|
Chi-Feng Chen, Yun-Sheng Ku, Tsu-Te Kung |
| 國立交通大學 |
2014-12-08T15:17:29Z |
Optimal Design of CPW Slot Antennas Using Taguchi's Method
|
Weng, Wei-Chung; Choi, Charles T. M. |
| 國立暨南國際大學 |
2009 |
Optimal Design of CPW Slot Antennas Using Taguchi's Method?
|
翁偉中; Weng, WC |
| 淡江大學 |
2002-05-01 |
Optimal design of degradation tests in presence of cost constraint
|
Wu, Shuo-jye; Chang, Chun-tao |
| 臺北醫學大學 |
1999 |
Optimal design of dental implants using finite element analysis
|
鄭信忠; 李勝揚; 林哲堂; Lin C T; Lee S Y; Ke T H; Wu L D; Cheng Hsin-Chung |
| 國立高雄第一科技大學 |
2006.06 |
Optimal design of digital IIR filters by using hybrid Taguchi genetic algorithm
|
Tsai,Jinn-Tsong;Chou, Jyh-Horng |
| 國立屏東大學 |
2006 |
Optimal Design of Digital IIR Filters Using Hybrid Taguchi Genetic Algorithm
|
蔡進聰;J.T.Tsai;J.H.Chou;T.K.Liu |
| 國立臺灣大學 |
1970 |
Optimal Design of Discrete Process Control System by Dynamic Programming Ⅰ:Process Optimization
|
趙榮澄; Chao, Yung-Cheng |
| 國立臺灣大學 |
1973 |
Optimal Design of Discrete Process Control System by Dynamic Programming Ⅱ:Load Optimization
|
趙榮澄; 黃孝平; Chao, Yung-Cheng; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1974 |
Optimal Design of Discrete Process Control System by Dynamic Programming Ⅲ:Control Gain Optimization
|
趙榮澄; 黃孝平; Chao, Yung-Cheng; Huang, Hsiao-Ping |
| 國立臺灣科技大學 |
2007 |
Optimal design of discrete-value passive harmonic filters using sequential neural-network approximation and orthogonal array
|
Chang, Y.-P.;Low, C.;Wu, C.-J. |
| 國立政治大學 |
2005 |
optimal design of e-bar and S square control charts for dependent process steps
|
楊素芬 |
| 國立成功大學 |
2017-05~2017-08 |
Optimal design of fatigue life for RCP with PoP package by using the Taguchi method
|
Cheng;Hsin-En;Chen;Rong-Sheng |
| 中原大學 |
1999 |
Optimal Design of Filament Winding Using Neural Network Experimental Design Scheme (SCI)
|
Junghui Chen;Shi-Shang Jang;David Shan Hill Wong;Chen-Chi M. Ma.;Jia -Min Lin |
| 大葉大學 |
2005-08 |
Optimal Design of Filament Wound Composite Pressure Vessels
|
Teng, T. L.;Yu, C. M.;Wu, Y. Y. |
| 國立東華大學 |
2005-05 |
Optimal design of fine magnetic pole pitch fabricated on printed circuit board
|
Huang, D. R.; Chiu, K. C.; Hsieh, H. P. |
| 國立交通大學 |
2014-12-08T15:19:09Z |
Optimal design of fine magnetic pole pitch fabricated on printed circuit board
|
Chiu, KC; Huang, DR; Shieh, HPD |
