| 臺大學術典藏 |
2020-01-13T08:23:53Z |
Optimal design of an absorption chilled water storage air conditioning system driven by waste heat
|
Chen, S.-L.; Liang, J.-D.; Chiang, Y.-C.; Chang, C.-C.; SIH-LI CHEN |
| 臺大學術典藏 |
2018-09-10T15:20:31Z |
Optimal design of an axial-flux permanent-magnet middle motor integrated in a cycloidal reducer for a pedal electric cycle
|
Yang, Y.-P.; Jiang, J.-M.; YEE-PIEN YANG |
| 臺大學術典藏 |
2020-01-13T08:25:20Z |
Optimal design of an axial-flux permanent-magnet motor for an electric vehicle based on driving scenarios
|
YEE-PIEN YANG; Shih, G.Y.; Yang, Y.P.; YEE-PIEN YANG;Shih, G.Y.;Yang, Y.P. |
| 淡江大學 |
2008-12 |
Optimal Design of an Experimental Methanol Fuel Reformer
|
Chuang, Chih-chiang; Chen, Yih-Hang; Jeffrey D. Ward; Yu, Cheng-Ching; Liu, Yen-Chun; Lee, Chiou-Hwang |
| 國立臺灣大學 |
2008 |
Optimal design of an experimental methanol fuel reformer
|
Chuang, Chih-Chiang; Chen, Yih-Hang; Ward, Jeffrey D.; Yu, Cheng-Ching; Liu, Yen-Chun; Lee, Chiou-Hwang |
| 國立成功大學 |
2020 |
Optimal design of an integrated renewable-storage energy system in a mixed-use building
|
Culaba, A.B.;Del, Rosario A.J.R.;Ubando, A.T.;Chang, J.-S. |
| 義守大學 |
2007 |
Optimal design of an irregular Fresnel lens for multiple light sources using a three-layered Hierarchical Genetic Algorithm
|
Wen-Gong Chen;Chii-Maw Uang;Chen-Hai Jou |
| 國立中山大學 |
2008-11 |
Optimal Design of an SPM Motor Using Genetic Algorithms and Taguchi Method
|
C.C. Hwang;L.Y. Lyu;P.L. Li;C.T. Liu |
| 國立暨南國際大學 |
2012 |
Optimal Design of an Ultra-Wideband Antenna with the Irregular Shape on Radiator using Particle Swarm Optimization
|
翁偉中; Weng, WC |
| 國立成功大學 |
2018-01 |
Optimal Design of Annular Fin Shapes with Temperature-Dependent Properties
|
Huang;Cheng-Hung;Chung;Yun-Lung |
| 義守大學 |
2009-03 |
Optimal design of antireflection coating and experimental verification by plasma enhanced chemical vapor deposition in small displays
|
S. M. Yang;Y. C. Hsieh;C. A. Jeng |
| 國立成功大學 |
2010-01-31 |
Optimal design of baffles locations with interdigitated flow channels of a centimeter-scale proton exchange membrane fuel cell
|
Jang, Jiin-Yuh; Cheng, Chin-Hsiang; Huang, Yu-Xian |
| 國立交通大學 |
2014-12-08T15:18:14Z |
Optimal design of CMOS pseudoactive pixel sensor (PAPS) structure for low-dark-current and large-array-size imager applications
|
Shih, YC; Wu, CY |
| 國立臺灣大學 |
2005 |
Optimal Design of Complex Two-Channel IIR QMF Banks with Equiripple Response
|
Lee, Ju-Hong; Yang, Yuan-Hau |
| 臺大學術典藏 |
2018-09-10T05:26:44Z |
Optimal Design of Complex Two-Channel IIR QMF Banks with Equiripple Response
|
Ju-Hong Lee; Y.-H. Yang; JU-HONG LEE |
| 中原大學 |
2010-05 |
Optimal Design of Continuous Double-Pass Thermal-Diffusion Columns with
|
Chii-Dong Ho; Ho-Ming Yeh; Jia-Jan Guo; Jr-Wei Tu and Ching-Jung Chuang |
| 義守大學 |
2015-08 |
Optimal Design of Continuous Reinforced Concrete Beams using Neural Networks
|
Jiin-Po Yeh;Ren-Pei Yang |
| 淡江大學 |
2007 |
Optimal Design of Corrugated Cellular Plastic Foam with Semi-elliptical Shaped Upper Surface by Finite Element Frequency Domain Acoustic Analysis
|
蔡慧駿; Tsay, Huoy-shyi; Yeh, Fung-huei |
| 國立聯合大學 |
2007 |
Optimal design of coupling waveguide structure for adiabati coptical directional full couplers weighted by sin-square and raised-cosine functions
|
Chi-Feng Chen, Yun-Sheng Ku, Tsu-Te Kung |
| 國立交通大學 |
2014-12-08T15:17:29Z |
Optimal Design of CPW Slot Antennas Using Taguchi's Method
|
Weng, Wei-Chung; Choi, Charles T. M. |
| 國立暨南國際大學 |
2009 |
Optimal Design of CPW Slot Antennas Using Taguchi's Method?
|
翁偉中; Weng, WC |
| 淡江大學 |
2002-05-01 |
Optimal design of degradation tests in presence of cost constraint
|
Wu, Shuo-jye; Chang, Chun-tao |
| 臺北醫學大學 |
1999 |
Optimal design of dental implants using finite element analysis
|
鄭信忠; 李勝揚; 林哲堂; Lin C T; Lee S Y; Ke T H; Wu L D; Cheng Hsin-Chung |
| 國立高雄第一科技大學 |
2006.06 |
Optimal design of digital IIR filters by using hybrid Taguchi genetic algorithm
|
Tsai,Jinn-Tsong;Chou, Jyh-Horng |
| 國立屏東大學 |
2006 |
Optimal Design of Digital IIR Filters Using Hybrid Taguchi Genetic Algorithm
|
蔡進聰;J.T.Tsai;J.H.Chou;T.K.Liu |
| 國立臺灣大學 |
1970 |
Optimal Design of Discrete Process Control System by Dynamic Programming Ⅰ:Process Optimization
|
趙榮澄; Chao, Yung-Cheng |
| 國立臺灣大學 |
1973 |
Optimal Design of Discrete Process Control System by Dynamic Programming Ⅱ:Load Optimization
|
趙榮澄; 黃孝平; Chao, Yung-Cheng; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1974 |
Optimal Design of Discrete Process Control System by Dynamic Programming Ⅲ:Control Gain Optimization
|
趙榮澄; 黃孝平; Chao, Yung-Cheng; Huang, Hsiao-Ping |
| 國立臺灣科技大學 |
2007 |
Optimal design of discrete-value passive harmonic filters using sequential neural-network approximation and orthogonal array
|
Chang, Y.-P.;Low, C.;Wu, C.-J. |
| 國立政治大學 |
2005 |
optimal design of e-bar and S square control charts for dependent process steps
|
楊素芬 |
| 國立成功大學 |
2017-05~2017-08 |
Optimal design of fatigue life for RCP with PoP package by using the Taguchi method
|
Cheng;Hsin-En;Chen;Rong-Sheng |
| 中原大學 |
1999 |
Optimal Design of Filament Winding Using Neural Network Experimental Design Scheme (SCI)
|
Junghui Chen;Shi-Shang Jang;David Shan Hill Wong;Chen-Chi M. Ma.;Jia -Min Lin |
| 大葉大學 |
2005-08 |
Optimal Design of Filament Wound Composite Pressure Vessels
|
Teng, T. L.;Yu, C. M.;Wu, Y. Y. |
| 國立東華大學 |
2005-05 |
Optimal design of fine magnetic pole pitch fabricated on printed circuit board
|
Huang, D. R.; Chiu, K. C.; Hsieh, H. P. |
| 國立交通大學 |
2014-12-08T15:19:09Z |
Optimal design of fine magnetic pole pitch fabricated on printed circuit board
|
Chiu, KC; Huang, DR; Shieh, HPD |
| 國立臺灣海洋大學 |
2011 |
Optimal Design of Flap Type Wave Energy Converter
|
Chou, Y. C.；Lin, C. C |
| 淡江大學 |
1985-08 |
Optimal design of flat-plate thermal diffusion columns with fixed plate-surface area
|
Yeh, Ho-ming; Yang, Fuh-tsorng; Yang, Shyh-ching |
| 淡江大學 |
1972-09 |
Optimal design of flat-plates thermal deffusion columns
|
葉和明; Yeh, Ho-ming; Chu, Tien-yung; Tsai, Chang-shou |
| 國立臺灣大學 |
1993 |
Optimal design of flux observer in induction machines
|
Wang, Chi-Hsiang; Lin, Wei-Song |
| 義守大學 |
2006-09 |
Optimal design of Fresnel lens for a reading light system with multiple light sources using three-layered hierarchical genetic algorithm
|
CHEN Wen-Gong; UANG Chii-Maw |
| 國立交通大學 |
2017-04-21T06:48:48Z |
Optimal design of Ge-dot photoMOSFETs for highly-integrated monolithic Si Photonics
|
Kuo, Ming-Hao; Lee, M. C.; Tien, J. W.; Lai, Wei-Ting; Li, Pei-Wen |
| 國立成功大學 |
2012-05 |
Optimal design of geometric parameters of double-layered microchannel heat sinks
|
Hung, Tu-Chieh; Yan, Wei-Mon; Wang, Xiao-Dong; Huang, Yu-Xian |
| 國立交通大學 |
2014-12-08T15:25:40Z |
Optimal design of high fan-in multiplexers via mixed-integer nonlinear programming
|
Huang, HW; Wang, CY; Jou, JY |
| 國立成功大學 |
2019 |
Optimal Design of Hybrid Renewable Energy System Using HOMER: A Case Study in the Philippines
|
Lin, C.E.;Phan, B.C.;Lai, Y.-C. |
| 國立交通大學 |
2014-12-08T15:13:16Z |
Optimal design of integrally gated CNT field-emission devices using a genetic algorithm
|
Chen, P. Y.; Chen, C. H.; Wu, J. S.; Wen, H. C.; Wang, W. P. |
| 國立交通大學 |
2014-12-08T15:24:17Z |
Optimal design of ITO/organic photonic crystals in polymer light-emitting diodes with sidewall reflectors for high efficiency
|
Tsai, C. H.; Chao, Paul C. -P. |
| 淡江大學 |
1989-06 |
Optimal design of laminated composites using a modified mixed integer and discrete programming algorithm
|
Hajela, P.; Shih, C. J. |
| 中原大學 |
1998-08 |
Optimal Design of Large Grounding Grids Based on Simulated Annealing Method
|
Chih-Ju Chou |
| 國立成功大學 |
2015-09 |
Optimal Design of LED Array Combinations for CCM Single-Loop Control LED Drivers
|
Lin, Ray-Lee; Tsai, Jhong-Yan; Liu, Shun-Yao; Chiang, Hsin-Wei |
| 國立成功大學 |
2013-03 |
Optimal Design of LED Array for Single-Loop CCM Buck-Boost LED Driver
|
Lin, Ray-Lee; Chang, Yi-Chun; Lee, Chia-Chun |
