| 中國醫藥大學 |
2015-10 |
Optimization of phase-contrast MRI for the quantification of whole-brain cerebral blood flow
|
彭馨蕾(Shin-Lei Peng);(Pan Su);(Fu-Nien Wang);(Yan Cao);(Rong Zhang);(Hanzhang Lu);(Peiying Liu)* |
| 國立交通大學 |
2014-12-08T15:22:56Z |
Optimization of photo-Fenton process parameters on carbofuran degradation using central composite design
|
Lu, Li A.; Ma, Ying S.; Daverey, Achlesh; Lin, Jih G. |
| 元培科技大學 |
2012-04-11 |
Optimization of photo-Fenton process parameters on carbofuran degradation using central composite design
|
Li, A.LU; Ying, S.Ma; Daverey, Achlesh; Jih, G.Lina |
| 中華大學 |
2010 |
Optimization of photolithography process for a LGP molding stamper
|
陳文欽; Chen, Wen-chin |
| 國立高雄應用科技大學 |
2012-05 |
Optimization of Photovoltaic Penetration in Distribution Systems Considering Annual Duration Curve of Solar Irradiation
|
C.H.Lin;W.L.Hsieh;C.S.Chen;C.T.Hsu;T.T.Ku |
| 義守大學 |
2012-05 |
Optimization of Photovoltaic Penetration in Distribution Systems Considering Annual Duration Curve of Solar Irradiation
|
Chia-Hung Lin;Wei-Lin Hsieh;Chao-Shun Chen;Cheng-Ting Hsu;Te-Tien Ku |
| 義守大學 |
2012-10 |
Optimization of Photovoltaic Penetration with DSTATCOM in Distribution Systems
|
C. H. Lin;C. S. Chen;W. L. Hsieh;C. T. Hsu;H. J. Chuang;C.Y. Ho |
| 國立成功大學 |
2023 |
Optimization of Physical Activation Process by CO2 for Activated Carbon Preparation from Honduras Mahogany Pod Husk
|
Tsai, C.-H.;Tsai, W.-T. |
| 朝陽科技大學 |
2019-08-05 |
Optimization of physician task scheduling under stochastic processing times
|
洪士程;林謝興 |
| 國立交通大學 |
2014-12-08T15:09:07Z |
Optimization of physics-based equivalent circuits for microstrip patch antennas
|
Chiu, Tang-Jung; Kuo, Yi-Ting; Chao, Hsueh-Yung (Robert); Li, Yi-Ming |
| 國立臺灣大學 |
2008-06 |
Optimization of Piezoelectric Transformers Using Genetic Algorithm
|
Yang, Y. J.; Kang, C. Y.; Lee, C. K. |
| 臺大學術典藏 |
2020-01-13T08:25:10Z |
Optimization of piezoelectric transformers using genetic algorithm
|
Yang, Y.-J.; Kang, C.-Y.; Lee, C.-K.; YAO-JOE YANG |
| 臺大學術典藏 |
2020-04-28T07:12:21Z |
Optimization of piezoelectric transformers using genetic algorithm
|
Yang, Y.-J.; Kang, C.-Y.; Lee, C.-K.; CHIH-KUNG LEE |
| 臺大學術典藏 |
2021-11-25T04:06:25Z |
Optimization of Piezoelectric Transformers Using Genetic Algorithm
|
C.-Y. Kang; C.-K. Lee; Y.-J. Yang; YAO-JOE YANG |
| 東海大學 |
2006 |
Optimization of pipelined transmission scheduling in TDM/WDM ring networks
|
Ho, H.-J.a , Yang, R.b , Liu, J.c, Lee, S.c |
| 國立臺灣海洋大學 |
2002 |
Optimization of pitch sequencing for pneumatic tire by tabu search method
|
Chiu, J.T;Weng, W.C;Hung, C.F |
| 國立交通大學 |
2014-12-08T15:33:11Z |
Optimization of Placement Solutions for Routability
|
Liu, Wen-Hao; Koh, Cheng-Kok; Li, Yih-Lang |
| 國立臺灣科技大學 |
2008 |
Optimization of plasma arc welding parameters by using the Taguchi method with the grey relational analysis
|
Hsiao, Y.F.;Tarng, Y.S.;Huang, W.J. |
| 國立交通大學 |
2014-12-08T15:31:24Z |
Optimization of plasmonic cavity-resonant multijunction cells
|
Lin, Albert S.; Fu, Sze-Ming; Zhong, Yan-Kai; Tseng, Chi-Wei; Lai, Shih-Yun; Lau, Timothy Ching Kwok |
| 東海大學 |
2010-11 |
Optimization of plastic injection molding process by dual response surface method with non-linear programming
|
Chen, Wu-Lin, Huang, Chin-Yin and Hung, Chi-Wei; 黃欽印 |
| 東海大學 |
2010 |
Optimization of plastic injection molding process by dual response surface method with non-linear programming
|
Chen, W.-L., Huang, C.-Y., Hung, C.-W. |
| 中華大學 |
2008 |
Optimization of Plastic Injection Molding Process via Taguchi’s Parameter Design Method, BPNN, and DFP
|
陳文欽; Chen, Wen-chin |
| 元智大學 |
2004-12 |
Optimization of Plate Fin Heat Sinks Using Genetic Algorithms
|
林育才; 謝建興; Jin-Long Lin |
| 臺北醫學大學 |
2013 |
Optimization of platelet-rich plasma and its effects on the recovery of erectile function after bilateral cavernous nerve injury in a rat model
|
YN, Wu;CC, Wu;MT, Sheu;KC, Chena;HO, Ho;HS, Chiang |
| 臺北醫學大學 |
2013 |
Optimization of platelet-rich plasma and its effects on the recovery of erectile function after bilateral cavernous nerve injury in a rat model
|
Wu, YN;Wu, CC;Sheu, MT;Chen, KC;Ho, HO;Chiang, HS |
| 臺大學術典藏 |
2018-09-10T18:04:22Z |
Optimization of PMA-qPCR for Staphylococcus aureus and determination of viable bacteria in indoor air
|
Chang, C.-W. ; Lin, M.-H.; CHING-WEN CHANG |
| 臺大學術典藏 |
2022-03-29T06:37:40Z |
Optimization of PMA-qPCR for Staphylococcus aureus and determination of viable bacteria in indoor air
|
CHING-WEN CHANG; Lin M.-H. |
| 國立交通大學 |
2014-12-08T15:12:36Z |
Optimization of PMOS-triggered SCR devices for on-chip ESD protection in a 0.18-mu m CMOS technology
|
Chen, Shih-Hung; Ker, Ming-Dou |
| 國立聯合大學 |
2008 |
Optimization of polishing parameters for glass substrate of STN-LCD
|
Chi-Hsiang Lien, Y. H. Guu |
| 臺大學術典藏 |
2018-09-10T09:23:02Z |
Optimization of polymer light emitting devices using TiO x electron transport layers and prism sheets
|
Ho, Y.-H.; Chang, Y.-T.; Liu, S.-W.; Lai, H.-H.; Chu, C.-W.; Wu, C.-I.; Tian, W.-C.; Wei, P.-K.; CHIH-I WU; WEI-CHENG TIAN |
| 國立臺灣海洋大學 |
2012-11 |
Optimization of polymer light emitting devices using TiOx electron transport layers and prism sheets
|
Pei-Kuen Wei; Yu-Hsuan Ho; Yung-Ting Chang; Shun-Wei Liu; Hsiao-Han Lai; Chih-Wei Chu; Chih-I Wu; Wei-Cheng Tian |
| 國立交通大學 |
2014-12-08T15:38:56Z |
Optimization of post-N-2 treatment and undoped-Si-glass cap to improve metal wring delamination in deep submicron high-density plasma-fluorinated silica glass intermetal dielectric application
|
Cheng, YL; Wang, YL; Lan, JK; Wu, SA; Chang, SC; Lo, KY; Feng, MS |
| 國立臺灣大學 |
2001-10 |
Optimization of power deposition and a heating strategy for external ultrasound thermal therapy
|
Lin, W.L.; Liang, T.C.; Yen, J.Y.; Liu, H.L.; Chen, Y.Y. |
| 國立臺灣大學 |
2001 |
Optimization of power deposition and a heating strategy for external ultrasound thermal therapy
|
Lin, Win-Li; Liang, Tzu-Chen; Yen, Jia-Yush; Liu, Hao-Li; Chen, Yung-Yaw |
| 臺大學術典藏 |
2020-02-26T09:01:13Z |
Optimization of power deposition and a heating strategy for external ultrasound thermal therapy
|
Win-Li Lin;Liang T.-C.;Yen J.-Y.;Liu H.-L.;Chen Y.-Y.; Win-Li Lin; Liang T.-C.; Yen J.-Y.; Liu H.-L.; Chen Y.-Y. |
| 臺大學術典藏 |
2018-09-10T07:41:44Z |
Optimization of power deposition for external ultrasound thermal therapy
|
T. C. Liang; J. Y. Yen; W. L. Lin; M. J. Shieh; Y. Y. Chen; T. C. Shih; H. S. Kuo; YUNG-YAW CHEN |
| 國立彰化師範大學 |
1999 |
Optimization of Pre-index Set Valued Functions
|
L. J. Lin |
| 中國醫藥大學 |
2005-01-? |
Optimization of preconcentration and isolation for the determination of 15 phenols by supercritical fluid extraction and gas chromatography with metallomesogenic stationary phase?
|
陳建良(Jian-Lian Chen)? |
| 國立臺灣大學 |
2005 |
Optimization of preconcentration and isolation for the determination of 15 phenols by supercritical-fluid extraction and gas chromatography with metallomesogenic stationary phase
|
Chen, Jian-Lian; Liu, Chuen-Ying |
| 修平科技大學 |
2002-11-22 |
Optimization of Pressurized Liquid Extraction of Bioactivity Compounds from Taiwan Pines and Its Antioxidant Ability
|
Sun-Che Lin |
| 國立交通大學 |
2014-12-08T15:24:04Z |
Optimization of probe-laser focal offsets for single-particle tracking
|
Chang, Ai-Tang; Chang, Yi-Ren; Chi, Sien; Hsu, Long |
| 國立高雄應用科技大學 |
2014-10 |
Optimization of process conditions for the production of TiO2–xNyfilm by sol–gel process using response surface methodology
|
楊文都; Liu, Rui;Hsieh, Ching-Shieh;Yang, Wein-Duo;Tsai, Hui-Yi |
| 國立高雄應用科技大學 |
2013 |
Optimization of Process Parameters and Fatigue Prediction for Flexure-Based Compliant Mechanism
|
Dao, Thanh-Phong; Huang, Shyh-Chour |
| 南台科技大學 |
2012 |
Optimization of Process Parameters for Contemporary Eyeglasses Frame by Using Taguchi Method
|
曾錦明; Tang Cam Minh |
| 國立臺灣科技大學 |
2015 |
Optimization of process parameters for dimensional accuracy in an area-forming rapid prototyping system using the Taguchi method
|
Chiu, S.-H.;Chen, Chen C.-C.;Chen, K.-T.;Su, C.-H. |
| 國立成功大學 |
2016-02 |
Optimization of Process Parameters for Gilding Stamping by Taguchi and Image Processing Methods
|
Chiu, Cheng-Chang; Chou, Fu-I; Cheng, Ming-Yang; Tsai, Jinn-Tsong |
| 南台科技大學 |
2012 |
Optimization of Process Parameters for Plastic Glasses by Using Taguchi Method
|
阮智勇; Nguyen Tri Dung |
| 南台科技大學 |
2012 |
Optimization of Process Parameters for Sunglass Frame by Using Taguchi Method and Artificial Neural Network
|
陳碧山; TRAN BICH SON |
| 朝陽科技大學 |
2019-11 |
Optimization of Process Parameters for the Removal of Chromium (VI) from Waste Water Using Mixed Adsorbent
|
Krishna, Darapureddi;Kumar, Gantala Santhosh;Raju, Dandu Radha Prasada |
| 中華大學 |
2012 |
Optimization of Process Parameters using DOE, RSM and GA in Plastic Injection Molding
|
陳文欽; Chen, Wen-chin |
