| 國立臺灣海洋大學 |
2016 |
Design and Experimental Evaluation of a Circular Saw Blade with Self-Clamped Cutting Inserts
|
Chang, W. T.;Chen, L. C |
| 東海大學 |
2006 |
Design and experimental research on permanent magnet linear synchronous servo unit used in NC machine tool feeding system
|
Zhao, T.a, Wang, X.a, Liu, C.a, Wu, D.a, Zhou, T.a, Lin, J.b |
| 國立交通大學 |
2017-04-21T06:48:34Z |
Design and Experimental Results of a Wireless Power Receiver for the Water Pollution Detection System
|
Chiang, Che-Yi; Lin, Long-Yi; Hong, Hao-Chiao |
| 國立交通大學 |
2017-04-21T06:48:52Z |
Design and Experimental Study of a Shared-Controlled Omnidirectional Mobile Platform
|
Lin, Ming-Han; Song, Kai-Tai |
| 國立交通大學 |
2014-12-08T15:25:46Z |
Design and experimental study of an ultrasonic sensor system for lateral collision avoidance at low speeds
|
Song, KT; Chen, CH; Huang, CHC |
| 國立交通大學 |
2014-12-08T15:24:18Z |
Design and experimental validation of a sliding-mode stabilizer for a ship-carried satellite antenna
|
Chao, Paul C. -P.; Chiu, Chun-Wei |
| 國立成功大學 |
2023-12 |
Design and Experimental Validation of an Optical Autofocusing System with Improved Accuracy
|
Hung;Jui-Hsiang;Tu;Ho-Da;Hsu;Wen-Huai;Liu;Chien-Sheng |
| 元智大學 |
2021-08-30 |
Design and Experimental Validation of Digital Pre-distortion Techniques for mmWave OTA with Multiple Nonlinear Power Amplifiers
|
Deng J.-H.; Chuan-Yi Liu; Cun-Jhe Liu; Meng-Lin Ku |
| 國立交通大學 |
2014-12-08T15:11:27Z |
Design and experimental validation of the complex luminance model for the cold cathode fluorescent lamps backlight systems
|
Chao, Paul C. -P.; Liao, Lun-De; Chiu, Chi-Wei |
| 臺大學術典藏 |
2010 |
Design and Experimental Verification of Novel Hydrodynamic Grooved Journal Bearing
|
Chen, Chien-Yu; Yen, Ruey-Hor; Lin, Psang-Dain; Tsai, Meng-Che; Liu, Chien-Sheng; Tsai, Meng-Che; Yen, Ruey-Hor; Lin, Psang-Dain; Chen, Chien-Yu; Liu, Chien-Sheng |
| 國立臺灣大學 |
2010 |
Design and Experimental Verification of Novel Hydrodynamic Grooved Journal Bearing
|
Liu, Chien-Sheng; Tsai, Meng-Che; Yen, Ruey-Hor; Lin, Psang-Dain; Chen, Chien-Yu |
| 國立交通大學 |
2014-12-08T15:19:31Z |
Design and Experimentation of an Optical-Header Processing and Access Control System for a Packet-Switched WDM Metro Ring Network
|
Yuang, Maria C.; Wang, Ya-Shian; Lin, Yu-Min |
| 國立成功大學 |
2011-04-01 |
Design and experiments of a short-mixing-length baffled microreactor and its application to microfluidic synthesis of nanoparticles
|
Chung, C. K.; Shih, T. R.; Chang, C. K.; Lai, C. W.; Wu, B. H. |
| 臺大學術典藏 |
2020-05-14T06:59:49Z |
Design and Experiments of Corner with Non-uniformly Distributed Turning Vanes
|
Wang, A.-B.; Chen, H.-P.; AN-BANG WANG |
| 國立交通大學 |
2014-12-08T15:30:11Z |
Design and Fabricate a Contact Lens Sensor with a Micro-Inductor Embedded for Intraocular Pressure Monitoring
|
Tseng, Chien-Kai; Huang, Yu-Chieh; Tsai, Shang-Wei; Yeh, Guan-Ting; Chang, Chung-Hao; Chiou, Jin-Chern |
| 南台科技大學 |
2007 |
Design and Fabricate H-Shaped Dual-Band Bandpass Filters on Al2O3 Substrate
|
鄒文正; C.F. Yang; Wen-Cheng Tzou; M. Cheung; D.W. Chou |
| 南台科技大學 |
2007 |
Design and FabricateDual-Band Parallel-Coupled Microstrip Line Microwave Filters on Al2O3Substrat
|
C. F. Yang; D. W. Chou; J. Y. Huang; C. M. Cheng |
| 國立成功大學 |
2004-07-30 |
Design and fabrication development of a micro flow heated channel with measurements of the inside micro-scale flow and heat transfer process
|
Liu, C. W.; Gau, Chie; Dai, B. T. |
| 南台科技大學 |
2003-11 |
Design and fabrication issues on micromachined oxygen sensors for miniaturized energy consumption measurement systems
|
吳建中; Chien-Chung Wu; Mei-Hsing Chen; LUO Ching-Hsing Luo; Gwo-Bin Lee |
| 國立成功大學 |
2003 |
Design and fabrication issues on micromachined oxygen sensors for miniaturized energy consumption measurement systems
|
Wu, Chien-Chung; Chen, Mei-Hsing; Luo, Ching-Hsing; Lee, Gwo-Bin |
| 國立交通大學 |
2014-12-08T15:07:28Z |
Design and Fabrication of 0/1-Level RF-Via Interconnect for RF-MEMS Packaging Applications
|
Hsu, Li-Han; Wu, Wei-Cheng; Chang, Edward Yi; Zirath, Herbert; Wu, Yun-Chi; Wang, Chin-Te; Lee, Ching-Ting |
| 臺大學術典藏 |
2021-11-25T04:06:49Z |
Design and fabrication of 1X2 optical fiber switch
|
W.-C. Kuo; Y.-J. Yang; YAO-JOE YANG |
| 國立聯合大學 |
2007 |
Design and Fabrication of 2D Electromagnetic Optical Scanning Mirrors ,
|
J.-L. Yang, H.-C. Liu, Y.-H. Guu and Max T.-K. Hou |
| 國立臺灣大學 |
2005 |
Design and fabrication of 2D phononic crystals in surface acoustic wave micro devices
|
Gu, K.; Shieh, J.-C.; Shih, W.-P. |
| 元智大學 |
2015-09-21 |
Design and Fabrication of 2D SOFC Stack with Planar 5cm×5cm Anode-Supported Cells
|
Xuan-Vien Nguyen; Guo-Bin Jung; Wilson Chao-Wei Huang; Kai-Jung Hsiao; Win-Tai Lee; Shu-Wei Chang; I-Cheng Kao |
