| 國立交通大學 |
2019-04-02T05:58:47Z |
Fabrication and study of a shallow-gap Pirani vacuum sensor with a linearly measurable atmospheric pressure range
|
Chou, BCS; Chen, CN; Shie, JS |
| 東方設計學院 |
2010-06 |
Fabrication and Study on One-Transistor-Capacitor Structure of Nonvolatile Random Access Memory TFT Devices Using Ferroeletric Gated Oxide Film
|
Cheng, Chien-Min; Chen, Kai-Huang; Lin, Chun-Cheng, Chen, Ying-Chung; Chen, Chih-Sheng; Chang, Ping-Kuan; 鄭建民; 陳開煌; 林俊成; 陳英忠; 陳志聖; 張評款; (東方設計學院電子與資訊系) |
| 國立交通大學 |
2019-04-02T05:57:51Z |
Fabrication and Study on Red Light Micro-LED Displays
|
Horng, Ray-Hua; Chien, Huan-Yu; Tarntair, Fu-Gow; Wuu, Dong-Sing |
| 國立成功大學 |
2016-12-01 |
Fabrication and sulfurization of Cu2SnS3 thin films with tuning the concentration of Cu-Sn-S precursor ink
|
Wang, Chi-Jie;Shei, Shih-Chang;Chang, Shih-Chang;Chang, Shoou-Jinn |
| 元智大學 |
2008-05 |
Fabrication and superhydrophobic behavior of fluorinated silica nanosphere arrays
|
謝建德; 陳威宇; 吳方伶; 沈宜珊 |
| 元智大學 |
2008-11 |
Fabrication and Superhydrophobicity of Fluorinated Carbon Fabrics with Micro/Nanoscaled Two-Tier Roughness
|
謝建德; W.-Y. Chen; F.-L. Wu |
| 元智大學 |
2009-12 |
Fabrication and Superhydrophobicity of Fluorinated Titanium Dioxide Nanocoatings
|
謝建德; 賴孟妶; 鄭鈺舜 |
| 國立成功大學 |
2005-06 |
Fabrication and surface functionalization of nanoporous gold by electrochemical alloying/dealloying of Au-Zn in an ionic liquid, and the self-assembly of L-cysteine monolayers
|
Huang, Jing-Fang; Sun, I-Wen |
| 國立成功大學 |
2010-04 |
Fabrication and Temperature-Dependent Photoluminescence of Silicon-Silicon Oxide Core-Shell Nanoparticle Thin Film
|
Lin, Sheng-Wei; Chen, Dong-Hwang |
| 淡江大學 |
2010-06 |
Fabrication and test of gamma-type stirling engine
|
Kang, Shung-wen; Kuo, Meng-yuan; Chen, Jian-you; Lu, Wen-an |
| 淡江大學 |
2002-10 |
Fabrication and test of radial grooved micro heat pipes
|
康尚文; Kang , Shung-wen; Tsai, Sheng-hong; Chen, Hong-chih |
| 淡江大學 |
2011 |
Fabrication and test of vapor chamber heat spreader
|
蔡孟昌; Tsai, Meng-Chang |
| 國立成功大學 |
2017 |
Fabrication and testing of breast tissue-mimicking phantom for needle biopsy cutting - A pilot study
|
Jheng, Y.-C.;Lin, C.-L. |
| 淡江大學 |
2010-02 |
Fabrication and testing of surface ratchets primed with hydrophobic parylene and hexamethyldisilazane for transporting droplets
|
Chung, Yung-Chiang; Hess, Guo-Yuan; Yeh, Fu-Wen; Han, Hsieh-Cheng; Chen, Chien-Yuan; Lee, Ching-Jiun; Sheen, Horn-Jiunn; Yang, Lung-Jieh |
| 國立臺灣大學 |
2010 |
Fabrication and testing of surface ratchets primed with hydrophobic parylene and hexamethyldisilazane for transporting droplets
|
Chung, Yung-Chiang; Hess, Guo-Yuan; Yeh, Fu-Wen; Han, Hsieh-Cheng; Chen, Chien-Yuan; Lee, Ching-Jiun; Sheen, Horn-Jiunn; Yang, Lung-Jieh |
| 元智大學 |
Jul-18 |
Fabrication and Testing of Thermoelectric CMOS-MEMS Microgenerators with CNCs Film
|
Yu-Wei Chen; Chyan-Chyi Wu; Cheng-Chih HSU; Ching-Liang Dai |
| 淡江大學 |
2018-06-27 |
Fabrication and testing of thermoelectric CMOS-MEMS microgenerators with CNSs Film
|
Chen, Yu-Wei;Wu, Chyan-Chyi;Hsu, Cheng-Chih;Dai, Ching-Liang |
| 國立交通大學 |
2019-12-13T01:12:20Z |
Fabrication and Thermal Dissipation Properties of Carbon Nanofibers Derived from Electrospun Poly(Amic Acid) Carboxylate Salt Nanofibers
|
Li, Jia-Wei; Chiu, Yu-Jing; Chang, Chia-Jui; He, Hung-Chieh; Tu, Yi-Hsuan; Lin, Kuan-Ting; Lin, Yu-Liang; Kao, Tzu-Hsun; Hsu, Hsun-Hao; Tseng, Hsiao-Fan; Lu, Tien-Chang; Chen, Jiun-Tai |
| 國立交通大學 |
2019-04-02T05:57:54Z |
Fabrication and Thermal Insulation Properties of Bamboo-Shaped Polymer Fibers by Selective Solvent Vapor Annealing
|
Chiu, Yu-Jing; Chiu, Han-Lun; Tseng, Hsiao-Fan; Wu, Bo-Hao; Li, Jia-Wei; Lu, Tien-Chang; Chen, Jiun-Tai |
| 國立成功大學 |
2015-11 |
Fabrication and thermoelectric properties of CuMn1+xO2 (x=0 similar to 0.2) ceramics
|
Hsieh, Cheng-Chung; Hwang, Chii-Shyang; Kuo, Chia-Hung; Qi, Xiao-ding; Hsiao, Chun-Lung |
| 國立東華大學 |
2006-07 |
Fabrication and Tolerance Reducing of Si-Based Pickup Module for Optical Storage
|
王智明; Wang, Chih-Ming; C. C. Lee;C. M. Wang;S. K. Huang;J. Y. Chang;G. C. Chi;S. C. Shu;C. Y. Liu |
| 淡江大學 |
2006-07 |
Fabrication and tolerance reduction of a Si-based pickup module for optical storage
|
Lee, Chien-chien; Wang, Chin-ming; Huang, S.K.; Chang, J. Y.;Chi, Gou-chung; Hsu, S. C.; Liu, C. Y. |
| 義守大學 |
2009-02 |
Fabrication and transformation of dense SnO2 via laser ablation condensation
|
Wan-Ju Tseng;Pouyan Shen;Shuei-Yuan Chen |
| 國立中山大學 |
2009 |
Fabrication and transformation of dense SnO2 via laser ablation condensation
|
W.J. Tseng;P. Shen;S.Y. Chen |
| 臺大學術典藏 |
2018-09-10T07:32:54Z |
Fabrication and transport properties of clean long one-dimensional quantum wires formed in modulation-doped GaAs/AIGaAs heterostructures
|
Liang, C.-T.; Simmons, M.Y.; Smith, C.G.; Ritchie, D.A.; Pepper, M.; CHI-TE LIANG |
| 國立臺灣大學 |
2001 |
Fabrication and transport studies on PrBa2(Cu1?xMx)3O7: M=Ga, Zn, and Co
|
Tipparach, U; Chen, T.-P; Wagner, J.L; Wu, K; Chen, Q.Y; Li, Q; Wang, J.T; Yang, H.C; Horng, H.-E |
| 元智大學 |
2006-09 |
Fabrication and vapor-phase adsorption characterization of acetone and n-hexane onto carbon nanofibers
|
謝建德; 周允文 |
| 中國醫藥大學 |
2012-01 |
Fabrication and Verification for a Small-Form-Factor of Blue-Light Optical Pickup Head with Holographic Optical Element
|
(Yue-Jheng Lin);(Yi Chiu);(Hsi-Fu Shih);邱俊誠(Jin-Chern Chiou)* |
| 國立交通大學 |
2014-12-08T15:37:59Z |
Fabrication and Verification for the Small-Form-Factor Holographic Optical Pickup
|
Hou, Kuan Chou; Chou, Po Chien; Cheng, Stone; Lin, Yue Jheng; Chiu, Yi; Chiou, Jin Chern |
| 中國醫藥大學 |
2011-01 |
Fabrication and Verification for the Small-Form-Factor Holographic Optical Pickup
|
(Kuan Chou Hou);(Po Chien Chou);(Stone Cheng);(Yue Jheng Lin);邱一(Yi Chiu);邱俊誠(Jin-Chern Chiou)* |
| 國立交通大學 |
2014-12-08T15:23:44Z |
Fabrication and Verification of a Small-Form-Factor Blue-Light Optical Pickup Head With Holographic Optical Element
|
Lin, Yue-Jheng; Chiu, Yi; Shih, Hsi-Fu; Chiou, Jin-Chern |
| 國立臺灣大學 |
2009 |
Fabrication and verification of an implantable electrical stimulation system
|
Tsai, Y.-C.; Shih, W.-P.; Lin, M.-L.; Chang, C.-H.; Lin, W.-T.; Chiu, H.-W.; Wen, Y.-R.; Lu, S.-S.; Lin, C.-W. |
| 國立高雄第一科技大學 |
2014.01 |
Fabrication and wetting characteristics of vertically self-aligned ZnO nanorods formed by anodic aluminum oxide template
|
Kao, Tzung-Ta;Chiu, Yi-Yen; 高宗達 |
| 國立交通大學 |
2014-12-08T15:06:36Z |
Fabrication and X-ray absorption NaxCoO2 spectroscopy in layered cobaltate thin films
|
Chang, W. J.; Lin, J.-Y.; Chung, T. Y.; Chen, J. M.; Hsu, C.-H.; Hsu, S. Y.; Uen, T. M.; Wu, K. H.; Gou, Y. S.; Juang, J. Y. |
| 國立東華大學 |
2005 |
Fabrication approaches to ZnO nanowire devices
|
Tien,L. C.; Kwon,Y.; Pearton,S. J.; Ren,F.; Gila,B. P.; Norton,D. P.; LaRoche,J. R.; Kang,B. S.; Heo,Y. W. |
| 國立成功大學 |
2006-08-14 |
Fabrication challenges for a complicated micro-flow channel system at low temperature process
|
Liu, C. W.; Gau, Chie; Ko, H. S.; Yang, C. S.; Dai, B. T. |
| 國立成功大學 |
2006-05 |
Fabrication error sensitivity analysis of three-degree-of-freedom parallel submicron positioning stage
|
Chen, Shang-Liang; Huang, Y. C.; Tomizuka, Masayoshi |
| 嘉南藥理大學 |
2015 |
Fabrication Improvement of Cold Forging Hexagonal Nuts by Computational Analysis and Experiment Verification
|
Hsia, Shao-Yi; Chou, Yu-Tuan |
| 大葉大學 |
2005-10 |
Fabrication lead time and demand variability: An empirical study
|
Ballard, Glenn;Ko, Chien-Ho |
| 國立臺灣科技大學 |
2014 |
Fabrication method and experiment study of nanoscale trapezoidal groove on sapphire substrate by using atomic force microscope under a fixed cutting depth and changed down force
|
Lin, Z.-C.;Tsai, J.-S.;Hsu, Y.-C.;Lin, C.-T. |
| 中原大學 |
2004-07-27 |
Fabrication method for forming flash memory device provided with adjustable sharp end structure of the L-shaped floating gate
|
Wen-Ying Wen;Jyh-Long Horng;Erik S. Jeng;Bai-Jun Kuo;Chih-Hsueh Hung |
| 臺大學術典藏 |
2018-09-10T04:59:28Z |
Fabrication method for graded organic junctions
|
C.-C. Wu; C.-W. Chen; T.-Y. Cho; T.-Y. Luh; CHUNG-CHIH WU |
| 臺大學術典藏 |
2018-09-10T04:59:28Z |
Fabrication method for graded organic junctions”
|
C.-C. Wu; C.-W. Chen; T.-Y. Cho; T.-Y. Luh; CHUNG-CHIH WU |
| 國立交通大學 |
2018-10-11 |
FABRICATION METHOD FOR TWO-DIMENSIONAL MATERIALS
|
Jyun-Hong Huang; Tuo-Hung HOU |
| 臺大學術典藏 |
2018-09-10T08:46:32Z |
Fabrication method of high-quality Ge nanocrystals on patterned Si substrates by local melting point control
|
Chien-Wei Chiu; Ting-Wei Liao; Kuen-Yu Tsai; Fu-Min Wang; Yuen-Wuu Suen; Chieh-Hsiung Kuan; KUEN-YU TSAI; CHIEH-HSIUNG KUAN |
| 淡江大學 |
2005/01/14 |
Fabrication Method of Nanoimprint Mold Core
|
Lin, Ching-Bin;Cheng, Pao-Yu;Lin, Hung-Yi |
| 淡江大學 |
2007-07-19 |
Fabrication method of nanoimprinting mold core
|
林清彬; Lin, Ching-bin; Cheng, Pao-yu; Lin, Hung-yi |
| 淡江大學 |
2011-10-25 |
Fabrication microstructural analysis, and properties of poly(methyl methacrylate)/calcium carbonate particulates nanocomposites.
|
Chang, Z.C.;Lin, C.B.;Chou, Y.-C.;Lee, H.-C. |
| 國立交通大學 |
2017-04-21T06:48:21Z |
Fabrication of (111) nanotwinned Cu and its applications in interconnects of microelectronic devices
|
Chen, Chih; Liu, Chien-Min; Lu, Tien-Lin; Lin, Han-wen; Chu, Yi-Cheng; Lu, Chia-Ling; Juang, Jing-Ye; Chen, Kuan-Neng; Tu, K. N. |
| 國立交通大學 |
2019-04-02T05:58:15Z |
Fabrication of (111)-Oriented Nanotwinned Au Films for Au-to-Au Direct Bonding
|
Wu, John A.; Huang, Chih-Yang; Wu, Wen-Wei; Chen, Chih |
