| 臺大學術典藏 |
2020-12-16T07:08:08Z |
Manufacturer's printing forecast, reprinting decision, and contract design in the educational publishing industry
|
Lee, C.-Y.;Liang, C.-L.; Lee, C.-Y.; Liang, C.-L.; CHIA-YEN LEE |
| 淡江大學 |
2018-08-13 |
Manufacturer's production plan for products sold with warranty in an imperfect production system under preventive maintenance and trade credits.
|
Chang, Chun-Tao;Cheng, Mei-Chuan |
| 中原大學 |
2002-12 |
Manufacturer-Retailer Inventory System with Limited Resources and Weibull Distribution Deteriorating Items
|
Wee, Hui-Ming;Law, Sh-Tyan;Yu, Jonas |
| 臺大學術典藏 |
2020-02-26T01:36:46Z |
Manufacturing and characterization of a thermoelectric energy harvester using the CMOS-MEMS technology
|
Peng, S.-W.; Shih, P.-J.; Dai, C.-L.; PO-JEN SHIH |
| 臺大學術典藏 |
2021-11-21T23:19:47Z |
Manufacturing and characterization of three-axis magnetic sensors using the standard 180 nm cmos technology
|
Wu, Chi Han; PO-JEN SHIH; Tsai, Yao Chuan; Dai, Ching Liang |
| 臺大學術典藏 |
2022-03-22T08:32:10Z |
Manufacturing and characterization of three-axis magnetic sensors using the standard 180 nm cmos technology
|
Wu C.-H;Shih P.-J;Tsai Y.-C;Dai C.-L.; Wu C.-H; Shih P.-J; Tsai Y.-C; Dai C.-L.; PO-JEN SHIH |
| 臺大學術典藏 |
2022-03-22T08:28:58Z |
Manufacturing and characterization of three-axis magnetic sensors using the standard 180 nm cmos technology
|
Wu C.-H;Shih P.-J;Tsai Y.-C;Dai C.-L.; Wu C.-H; Shih P.-J; Tsai Y.-C; Dai C.-L.; PO-JEN SHIH |
| 臺大學術典藏 |
2022-03-22T08:32:07Z |
Manufacturing and characterization of three-axis magnetic sensors using the standard 180 nm cmos technology
|
Wu C.-H;Shih P.-J;Tsai Y.-C;Dai C.-L.; Wu C.-H; Shih P.-J; Tsai Y.-C; Dai C.-L.; PO-JEN SHIH |
| 臺大學術典藏 |
2018-09-10T05:00:39Z |
Manufacturing and Engineering Collaboration Mechanism between Foundry and Fabless
|
RUEY-SHAN GUO;S. Chang;Y. Su; RUEY-SHAN GUO; S. Chang; Y. Su; RUEY-SHAN GUO |
| 中國醫藥大學 |
2012-07 |
Manufacturing and Functions of Bamboo CharcoalStainless Steel Composite Fabric
|
(An-Pang Chen);(Po-Wen Hwang)*;林佳弘(Jia-Horng Lin)* |
| 亞洲大學 |
200804 |
Manufacturing and Impact Properties of Bullet-Resistant Cushion Layer made of Three-dimensional Crimped Hollow Fiber
|
林青玫;LIN, CHIN-MEI |
| 亞洲大學 |
2008.04 |
Manufacturing and Impact Properties of Bullet-Resistant Cushion Layer made of Three-dimensional Crimped Hollow Fiber
|
林青玫;LIN, CHIN-MEI |
| 國立成功大學 |
2000-12 |
Manufacturing and materials properties of Ti/Cu/Electroless Ni/Solder bump on Si
|
Lin, Kwang-Lung; Hsu, Kun-Tzu |
| 亞洲大學 |
2014-03 |
Manufacturing and mechanical evaluation of HRBP/ PPTA intra-ply hybrid nonwovens for protecting cushioning composites
|
林佳弘;Lin, Jia-Horng;Yan, Ruosi;Yan, Ruosi;Wang, Rui;Wang, Rui;Wang, Cheng;Wang, Cheng;Lo, Ching-Wen;Lou, Ching-Wen |
| 亞洲大學 |
2014-03 |
Manufacturing and mechanical evaluation of HRBP/ PPTA intra-ply hybrid nonwovens for protecting cushioning composites
|
Jia Horng Lin;Ruo Si Yan;Rui Wang;Cheng Wang;Ching Wen Lou |
| 中國醫藥大學 |
2014-03 |
Manufacturing and mechanical evaluation of HRBP/ PPTA intra-ply hybrid nonwovens for protecting cushioning composites
|
林佳弘(Jia-Horng Lin);(Ruosi Yan);(Rui Wang);(Cheng Wang);(Ching-Wen Lou)* |
| 國立中山大學 |
1998 |
Manufacturing and Mechanical properties of Glass Bubbles/Epoxy Particulate Composites
|
M.H.R. Jen; W.H. Lin |
| 國立中山大學 |
2003-11 |
Manufacturing and Mechanical Properties of Nanocomposites Laminates, Section4, g3
|
任明華; 曾育鍾 |
| 亞洲大學 |
2014-03 |
Manufacturing and Mechanical Property Evaluations of CF /PLA Biocomposites
|
Lo, Ching-Wen;Lou, Ching-Wen;Liao, * Jo-Mei;Liao, Jo-Mei;Li, Zheng-Ian;Lin, Zheng-Ian;林佳弘;Lin, Jia-Horng;* |
| 亞洲大學 |
2014-03 |
Manufacturing and Mechanical Property Evaluations of CF /PLA Biocomposites
|
Ching Wen Lou;Jo Mei Liao;Zheng Lan Lin;Jia Horng Lin |
| 中國醫藥大學 |
2014-03 |
Manufacturing and Mechanical Property Evaluations of CF /PLA Biocomposites
|
(Ching-Wen Lou);(Jo-Mei Liao);(Zheng-Ian Lin);林佳弘(Jia-Horng Lin)* |
| 國立中山大學 |
2005 |
Manufacturing and Mechanical Response of Nanocomposite Laminates
|
M.H.R. Jen; Y.C. Tseng; C.H. Wu |
| 國立中山大學 |
2004-05-27 |
Manufacturing and Mechanical Response of Nanocomposite Laminates
|
M.H.R. Jen; Y.C. Tseng; C.H. Wu |
| 大葉大學 |
2008-07-20 |
Manufacturing and Mechanical Responses of Glass-fiber/Epoxy Composite Laminates for Composite Wind Turbine Blades
|
Chung, Tseng Yu;Han, Yang Shin;Yan, Kam Tai;Jwu, Su Shen;Min, Lai Feng;Hroung, Wu Jia |
| 亞洲大學 |
2009-04 |
Manufacturing and Physical Properties of Novel Composed of Nonwoven Selvages
|
林青玫;LIN, CHIN-MEI |
| 亞洲大學 |
201111 |
Manufacturing and Physical Properties of the Sound-Absorbent and Thermally Insulating Composite Plank for Green Building
|
林敬文;Lin, Ching-wen |
| 亞洲大學 |
2011.11 |
Manufacturing and Physical Properties of the Sound-Absorbent and Thermally Insulating Composite Plank for Green Building
|
林敬文;Lin, Ching-wen |
| 東海大學 |
2012-12-20 |
Manufacturing and production collaborative customers preference
|
Ho, Z.-P.; Pan, T.-N. |
| 國立成功大學 |
2022 |
Manufacturing and Properties of Alkali-Activated Weld-Slag Binders [鹼激發銲渣膠結材之製作與性質]
|
Lin, M.-Y.;Huang, J.-S. |
| 亞洲大學 |
2009-07 |
Manufacturing and Properties of Fire-Retardant and Thermal Insulation Nonwoven Fabrics with FR-Polyester Hollow Fibers
|
林青玫;LIN, CHIN-MEI |
| 中國文化大學 |
2008 |
Manufacturing and Properties of PLA Absorbable Surgical Suture
|
Lou, Ching-Wen; Yao, Chun-Hsu; Chen, Yueh-Sheng; Hsieh, Tsung-Chih; Lin, Jia-Horng; Hsing, Wen-Hao |
| 中國醫藥大學 |
2008.11 |
Manufacturing and properties of PLA absorbable surgical suture
|
(Ching-Wen Lou)*; 姚俊旭(Chun-Hsu Yao); 陳悅生(Yueh-Sheng Chen); (Tsung-Chih Hsieh); (Wen-Hao Hsing); (Jai-Horng Lin) |
| 亞洲大學 |
2015-01 |
Manufacturing and Property Evaluations of X-ray Shielding Fabric and Pattern Making of Vests
|
林佳弘;Lin, Jia-Horng;Ch, Jen-Chieh;Chung, Jen-Chieh;Zeng, Yu-Zhen;Zeng, Yu-Zhen;Liu, Yu-Chang;Liu, Yu-Chang;Lu, Yung-Fang;Lu, Yung-Fang;?仕鵬;Wen, Shih-Peng;樓靜文;Lou, Ching-Wen |
| 亞洲大學 |
2015-01 |
Manufacturing and Property Evaluations of X-ray Shielding Fabric and Pattern Making of Vests
|
Lin, 林佳弘 Jia-Horng;Wen, ?仕鵬 Shih-Peng;Lou, 樓靜文 Ching-Wen |
| 亞洲大學 |
2015/01 |
Manufacturing and Property Evaluations of X-ray Shielding Fabric and Pattern Making of Vests
|
Lin, 林佳弘 Jia-Horng;Wen, ?仕鵬 Shih-Peng; |
| 亞洲大學 |
2015-01 |
Manufacturing and Property Evaluations of X-ray Shielding Fabric and Pattern Making of Vests
|
林佳弘；Jia-Horng Lin；Jen-Chieh Ch；Jen-Chieh Chung；Yu-Zhen Zeng；Yu-Zhen Zeng；Yu-Chang Liu；Yu-Chang Liu；Yung-Fang Lu；Yung-Fang Lu；?仕鵬；Shih-Peng Wen；樓靜文； Lou,Ching-Wen |
| 亞洲大學 |
2015-01 |
Manufacturing and Property Evaluations of X-ray Shielding Fabric and Pattern Making of Vests
|
林佳弘;Lin, Jia-Horng;Chung,Jen-Chieh Ch;Jen-Chieh;Zeng, Yu-Zhen; Zeng,Yu-Zhen;Liu, Yu-Chang ;Liu,Yu-Chang;Lu, Yung-Fang; Lu,Yung-Fang;仕鵬;Wen,Shih-Peng;, 樓靜文;Lou,Ching-Wen* |
| 中國醫藥大學 |
2015-03 |
Manufacturing and Property Evaluations of X-ray Shielding Fabric and Pattern Making of Vests
|
林佳弘(Jia-Horng Lin);(Jen-Chieh Chung);(Yu-Zhen Zeng);(Yu-Chang Liu);(Yung-Fang Lu);(Shih-Peng Wen);(Ching-Wen Lou)* |
| 淡江大學 |
1998-04 |
Manufacturing and recycling of A380Al/SiC(p) composites
|
林清彬; Lin, C. B.; Leu, C. E.; Lee, E. C. |
| 臺大學術典藏 |
2021-08-05T02:42:01Z |
Manufacturing and testing of radio frequency MEMS switches using the complementary metal oxide semiconductor process
|
Tsai Z.-Y;Shih P.-J;Tsai Y.-C;Dai C.-L.; Tsai Z.-Y; Shih P.-J; Tsai Y.-C; Dai C.-L.; PO-JEN SHIH |
| 淡江大學 |
2010-11 |
Manufacturing and tribological properties of copper matrix/carbon nanotubes composites
|
Lin, C.B.; Chang, Zue-chin; Tung, Y.H.; Ko, Yuan-yuan |
| 淡江大學 |
2011-02-10 |
Manufacturing and tribological properties of copper matrix/carbon nanotubes composites
|
Lina, C.B.;Chang, Zue-Chin;Tung, Y.H.;Ko, Yuan-Yuan |
| 臺大學術典藏 |
2003 |
Manufacturing artificial aggregates from industrial sludge and marine clay with addition of sodium salt
|
Chien C.Y.;Show K.Y.;Hong S.Y.;Tay J.H.;Lee D.J.; Tay J.H.; Hong S.Y.; Show K.Y.; Chien C.Y.; Lee D.J. |
| 國立交通大學 |
2014-12-08T15:40:48Z |
Manufacturing capability control for multiple power-distribution switch processes based on modified C-pk MPPAC
|
Pearn, WL; Shu, MH |
| 淡江大學 |
2012-11 |
Manufacturing Capability to Improve Project/engineer-to-order Manufacturing Performance
|
楊立人 |
| 元智大學 |
2006-10 |
Manufacturing cost evaluation of design changes in a collaborative design and manufacturing system
|
鄭元杰; Yu-Wen Kao; Feng-Yi Huang |
| 實踐大學 |
2011 |
Manufacturing design of the novel multi-layer blending machine
|
Lin, J.H.;Hsing, W.H.;Lin, C.W.;Hsieh, C.T.;Cho, W.T.;Lou, C.W. |
| 亞洲大學 |
2011-05 |
Manufacturing Design of the Novel Multi-layer Blending Machine
|
Jia Horng Lin;Wen Hao Hsing;Ching Wen Lin;Chien Teng Hsieh;Wen Tai Cho;Ching Wen Lou |
| 中國醫藥大學 |
2011-07 |
Manufacturing Design of the Novel Multi-layer Blending Machine
|
林佳弘(Jia-Horng Lin)*;(Wen Hao Hsing);(Ching Wen Lin);(Chien Teng Hsieh);(Wen Tai Cho);(Ching Wen Lou)* |
| 國立中山大學 |
2000-12-08 |
Manufacturing Errors Analysis and Measurement of Indexing Mechanism of Curvic Couplings
|
Y.C. Tsai;C.T. Lin |
