| 國立成功大學 |
2002-08 |
Mathematical model of multiflute drill point
|
Hsieh, Jung-Fa; Lin, Psang-Dain |
| 元智大學 |
2013-12-1 |
Mathematical Model of Proton Exchange Membrane Fuel Cell with Consideration of Water Management
|
Ken-Ming Yin; H.-K. Hsuen |
| 國立臺灣科技大學 |
2003 |
Mathematical model of reaction between titanium pellet and nitrogen
|
Chen, H.K.;Lin, C.I.;Meng, C.H. |
| 國立中山大學 |
1989 |
Mathematical Model of Shifted Bevel Gears
|
Y.C. Tsai; Y.J. Su |
| 國立中山大學 |
1988 |
Mathematical Model of Shifted Bevel Gears
|
Y.C. Tsai;Y.J. Su |
| 國立交通大學 |
2014-12-08T15:02:01Z |
Mathematical model of spiral bevel and hypoid gears manufactured by the modified roll method
|
Lin, CY; Tsay, CB; Fong, ZH |
| 元培科技大學 |
2007-09-23 |
Mathematical model of the aiming trajectory
|
Hwang;Chi-Kuang; Lin; Kuo-Bin; Lin; Yu-Hsiung |
| 國立臺灣大學 |
2007 |
Mathematical model of the non-steady-state adsorption and biodegradation capacities of BAC filters
|
Liang, Chung-Huei; Chiang, Pen-Chi |
| 臺大學術典藏 |
2022-05-24T06:20:48Z |
Mathematical model of the post-ablation enhancement zone as a tissue-level oedematic response
|
Liu C.;Park C.S.;Hall S.K.;Payne S.J.; Liu C.; Park C.S.; Hall S.K.; Payne S.J.; STEPHEN JOHN PAYNE |
| 國立交通大學 |
2014-12-08T15:09:04Z |
Mathematical Model of the ZN-Type Worm Gear set with a Non-ninety-degree Crossing Angle and Undercutting Analysis of Worm Wheel Tooth Surfaces
|
Chen, Kuan-Yu; Tsay, Chung-Biau |
| 中原大學 |
1995 |
Mathematical model on vector-valued decision systems
|
Hang-Chin Lai |
| 東海大學 |
1995-07-00 |
Mathematical Model on Vector-Valued Decision Systems
|
賴漢卿 |
| 臺大學術典藏 |
2021-05-24T13:07:12Z |
Mathematical Model to Study Vanadium Ion Crossover in an All-Vanadium Redox Flow Battery
|
Chou, Yi Sin; SHI-CHERN YEN; Arpornwichanop, Amornchai; Singh, Bhupendra; Chen, Yong Song |
| 國立臺灣科技大學 |
2016 |
Mathematical modeling and analysis of the Delta robot with flexible links
|
Kuo, Y.-L. |
| 國立政治大學 |
2015-10 |
Mathematical modeling and Bayesian estimation for error-prone retail shelf audits
|
莊皓鈞; Chuang, Howard Hao-Chun |
| 國立政治大學 |
2015-12 |
Mathematical modeling and Bayesian estimation for error-prone retail shelf audits
|
莊皓鈞; Chuang, Howard Hao-Chun |
| 國立勤益科技大學 |
2013-03 |
Mathematical Modeling and Fault Tolerance Control for a Three-Phase Soft-Switching Mode Rectifier
|
謝錦聰 |
| 國立勤益科技大學 |
2013-03 |
Mathematical Modeling and Fault Tolerance Control for a Three-Phase Soft-Switching Mode Rectifier
|
趙貴祥 |
| 國立中山大學 |
2002-05 |
Mathematical Modeling and Field-oriented Control of a Disc-type Surface-mounted Permanent Magnet Motor
|
C.T. Liu;K.C. Chuang |
| 義守大學 |
2016-06 |
Mathematical Modeling and Investigation on the Soft Tissue Structures in Micro-indentation Tests Based on Cylindrical Shell Model
|
Mei-Feng Liu |
| 臺大學術典藏 |
2020-02-25T06:13:11Z |
Mathematical modeling and numerical simulation of flow characteristics in am upflow reactor
|
Lo, S.-L.; Leckie, J.O.; SHANG-LIEN LO |
| 國立臺灣大學 |
1988 |
Mathematical Modeling and Numerical Simulation of Flow Characteristics in an Upflow Reactor
|
駱尚廉; Leckie, J. O.; Lo, Shang-Lien; Leckie, J. O. |
| 淡江大學 |
2025.12.7 |
Mathematical Modeling and Optimization of Sustainable Production–Inventory Systems Using Particle Swarm Algorithms
|
Lu, Chi-Jie;Yang, Chih-Te;Jiang, Dong-Ying;Chen, Ming-Shu |
| 朝陽科技大學 |
2015-03 |
Mathematical Modeling and Optimization of Turning Process Parameters Using Response Surface Methodology
|
Devaki, K;Babu, K Satish;Reddy, K.Hemachandra |
| 國立臺灣大學 |
2007-11 |
Mathematical Modeling and Ordinary Differential Equations
|
Chern, I-Liang |
| 國立臺灣大學 |
2015 |
Mathematical Modeling and Ordinary Differential Equations
|
Chern, I-Liang |
| 南台科技大學 |
1992-05 |
Mathematical Modeling and Simulation of a Recycle Dialysis Membrane Reactor in a Reversed Micellar System
|
江禎立; C.L. Chiang ; S.W. Tsai |
| 臺大學術典藏 |
2019-10-28T03:21:33Z |
Mathematical modeling and simulation of the evolution of plaques in blood vessels
|
Yang, Yifan;Jaeger, Willi;Neuss-Radu, Maria;Richter, Thomas; Yang, Yifan; Jaeger, Willi; Neuss-Radu, Maria; Richter, Thomas; YI-FAN YANG |
| 臺大學術典藏 |
2019-10-28T03:21:47Z |
Mathematical modeling and simulation of the evolution of plaques in blood vessels
|
Yang, Yifan;Jaeger, Willi;Neuss-Radu, Maria;Richter, Thomas; Yang, Yifan; Jaeger, Willi; Neuss-Radu, Maria; Richter, Thomas; YI-FAN YANG |
| 朝陽科技大學 |
2019-01 |
Mathematical modeling for a fabrication-inventory problem with scrap, an acceptable stock-out level, stochastic failures, and a multi-shipment policy
|
王聖嘉; Chiu, Y-S.P.; Chen, H-Y.; Wu, H.Y. |
| 朝陽科技大學 |
2010 |
Mathematical modeling for determining economic batch size and optimal number of deliveries for EPQ model with quality assurance
|
Chiu, Y-S.P.;Lin, C-A.K.;Chang*, Huei-Hsin;Chiu, V. |
| 朝陽科技大學 |
2020-12-15 |
Mathematical modeling for multiproduct EPQ problem featuring delayed differentiation, expedited rate, and scrap
|
Wang, Y.; Lin, J-N.; 林宏達; 王聖嘉 |
| 國立政治大學 |
2013 |
Mathematical modeling for network selection in heterogeneous wireless networks - A tutorial
|
Wang, L.;Kuo, Geng-Sheng G.S.; 郭更生 |
| 義守大學 |
2011-07 |
Mathematical Modeling for Single-Walled Carbon Nanotubes (Swcnts) Based on Magneto-Electro-Elastic Beam Model
|
Mei-Feng Liu;Tai-Ping Chang |
| 中國文化大學 |
2012-03 |
Mathematical Modeling for the Pultrusion of Polymethyl Methacrylate Based Composites
|
Chen, CH (Chen, Chin-Hsing) |
| 國立成功大學 |
2003-07 |
Mathematical modeling for the solidification heat-transfer phenomena during the reflow process of lead-tin alloy solder joint in electronics packaging
|
Chiu, Yu-Fang; Tsai, Ying-Ling; Hwang, Weng-Sing |
| 中原大學 |
2003-07 |
Mathematical Modeling for Two-Suppliers Three-Echelon Deteriorating Inventory System
|
Hui-Ming Wee;Jonas Yu;Wen Tai Chen; |
| 臺大學術典藏 |
2018-09-10T07:30:22Z |
Mathematical modeling of a co-extrusion process for preparing gradient- index polymer optical fibers
|
WEN-CHANG CHEN; Liu, B.-T.; Chen, W.-C.; Hsu, J.-P. |
| 國立臺灣大學 |
1999 |
Mathematical modeling of a co-extrusion process for preparing gradient-index polymer optical fibers
|
Liu, Bo-Tau; Chen, Wen-Chang; Hsu, Jyh-Ping |
| 朝陽科技大學 |
2015-11-05 |
Mathematical modeling of a multi-product EMQ model with an enhanced end items issuing policy and failures in rework
|
Chiu, Yuan-Shyi Peter;Sung, Peng-Cheng;Chiu, Singa Wang;Chou, Chung-Li * |
| 義守大學 |
2006-05 |
Mathematical modeling of asymmetric reduction of ethyl 4-chloro acetoacetate by bakers' yeast
|
Jer-Yiing Houng;Jia-Sheng Liau |
| 國立成功大學 |
2021-04 |
Mathematical modeling of consolidation in unsaturated poroelastic soils under fluid flux boundary conditions
|
Lo;WeiCheng;Chang;JuiChe;Borja;Ronaldo;I;Deng;Jiao-Hong;Lee;Jhe-Wei |
| 國立成功大學 |
2023-02 |
Mathematical Modeling of Flexible Robot Manipulators with Slender Links a Lumped Parameter Approach
|
Hsu;Chung-Chan;Huang;Hao-Lun;Lu;Chang-Fu;Cheng;Ming-Yang |
| 國立成功大學 |
2000 |
Mathematical modeling of fluid flow phenomena during tundish filling and subsequent initial casting operation in steel continuous casting process
|
Fan, Chih-Ming; Hwang, Weng-Sing |
| 國立臺灣海洋大學 |
2018-11 |
Mathematical Modeling of Hybrid Intelligent System to Longitudinal Landing Control Design
|
Jhen-Tang Dai; Jih-Gau Juang |
| 淡江大學 |
2016/06/01 |
Mathematical modeling of Interleukin 35 promoting tumor growth and angiogenesis
|
Kang-Ling Liao, Xue-Feng Bai, and Avner Friedman |
| 淡江大學 |
2016/06/01 |
Mathematical modeling of Interleukin-27 induction of anti-tumor T cells response
|
Kang-Ling Liao, Xue-Feng Bai, and Avner Friedman |
| 臺大學術典藏 |
2010 |
Mathematical modeling of multi-plant order allocation problem and solving by genetic algorithm with matrix representation
|
Yang, F.-C.; Chen, K.; Wang, M.-T.; Chang, P.-Y.; Sun, K.-C.; FENG-CHENG YANG |
| 臺大學術典藏 |
2009-05-18T03:36:09Z |
Mathematical Modeling of Organic Aerosols Dynamics in the Urban Atmosphere
|
Seinfeld, J. H.; Lee, Whei-May; Seinfeld, J. H.; 李慧梅; Lee, Whei-May; Seinfeld, J. H. |
| 國立臺灣大學 |
1990-08 |
Mathematical Modeling of Organic Aerosols Dynamics in the Urban Atmosphere
|
李慧梅; Seinfeld, J. H.; Lee, Whei-May; Seinfeld, J. H. |
