| 國立臺灣海洋大學 |
2011-04 |
Design and Test of a MEMS-Based High G Smart Sensor
|
Y.P. Wang; R.Q. Hsu; C.W. Wu |
| 臺大學術典藏 |
2020-04-16T02:35:39Z |
Design and test of a monolithic ultrasound-image-guided HIFU device using annular CMUT rings
|
PAI-CHI LI; Li, P.-C.; Cheng, J.-C.; Cheng, X.; Chen, J.; Wang, M. |
| 臺大學術典藏 |
2021-10-25T08:51:50Z |
Design and Test of a Near Zero-Energy Office
|
B.-J. Huang; P.-C. Hsu; Y.-H. Wang; J.-H. Tsai; K. Li; K.-Y. Lee; KANG LI |
| 臺大學術典藏 |
2020-05-14T06:59:09Z |
Design and Test of a Novel Coating Technology for Multilayer Ceramic Capacitor (MLCC),
|
Lai, S.-H.; Hsieh, Y.-W, Yen, Y.-K.; Wang, A.–B.; AN-BANG WANG; Chen, T.-L.; Liu, Y.-J. |
| 國立臺灣科技大學 |
2014 |
Design and test of a rapid thermal annealing furnace for improving surface properties of silicon brick in multi-wire sawing process
|
Chen C.-C.A., Cheng S.-C., Chan M.-H., Hsu W.-C., Cheng S.-L. |
| 國立交通大學 |
2014-12-08T15:33:48Z |
DESIGN AND TEST OF A SITUATION-AUGMENTED DISPLAY FOR AN UNMANNED AERIAL VEHICLE MONITORING TASK
|
Lu, Jen-Li; Horng, Ruey-Yun; Chao, Chin-Jung |
| 臺大學術典藏 |
2020-01-17T07:47:17Z |
Design and test of additive manufacturing for coating thermoplastic PEEK material
|
SHIU-WU CHAU;Luo, R.C.;Liu, B.H.;Wei, W.C.;Chau, S.W.;Lee, N.T.;Wang, A.B.;Zeng, J.W.;Sun, T.J.;Hsieh, Y.W.;Liu, C.Y.; Liu, C.Y.; Hsieh, Y.W.; Sun, T.J.; Zeng, J.W.; Wang, A.B.; Lee, N.T.; Chau, S.W.; Wei, W.C.; Liu, B.H.; Luo, R.C.; SHIU-WU CHAU |
| 臺大學術典藏 |
2020-04-28T07:11:06Z |
Design and test of additive manufacturing for coating thermoplastic PEEK material
|
Liu, C.Y.; Hsieh, Y.W.; Sun, T.J.; Zeng, J.W.; Wang, A.B.; Lee, N.T.; Chau, S.W.; Wei, W.C.; Liu, B.H.; Luo, R.C.; AN-BANG WANG |
| 臺大學術典藏 |
2020-05-05T08:40:22Z |
Design and test of additive manufacturing for coating thermoplastic PEEK material
|
Liu C.Y.; Hsieh Y.W.; Sun T.J.; Zeng J.W.; Wang A.B.; Lee N.T.; Chau S.W.; Wei W.C.; Liu B.H.; Luo R.C.; AN-BANG WANG |
| 臺大學術典藏 |
2020-05-12T02:54:10Z |
Design and test of additive manufacturing for coating thermoplastic PEEK material
|
WEN-CHENG J. WEI; Luo, R.C.; Liu, B.H.; Liu, C.Y.; Hsieh, Y.W.; Sun, T.J.; Zeng, J.W.; Wang, A.B.; Lee, N.T.; Chau, S.W.; Wei, W.C. |
| 臺大學術典藏 |
1993-10 |
Design and test of memory management unit and cache controller chip
|
Hsieh, David; Lai, Fei-Pei; Hsieh, David; Lai, Fei-pei |
| 國立臺灣大學 |
1993-10 |
Design and test of memory management unit and cache controller chip
|
Hsieh, David; Lai, Fei-pei |
| 中華大學 |
2004 |
Design and test of micro catalytic combustors for use in microthrusters
|
鄭藏勝; Cheng, T. S. |
| 中華大學 |
2007 |
Design and Test of Microfabricated Strain Gauge for the Application of Flexible PU Heart Valve Membrane
|
林育立; Lin, Yuli |
| 臺大學術典藏 |
2020-05-14T06:59:26Z |
Design and Test of PEEK Material for Additive Manufacturing
|
An-Bang Wang; Shiou-Wu Chau; Ren-Chiuan Lou; Wen-Cheng Wei; Hao-Chih Liu; Chao-Yuan Liu; Yu-Wen Hsieh; Jian-Wei Tseng; Ta-Ju Sun; Nien-Tse Lee; AN-BANG WANG |
| 元智大學 |
2012-10-24 |
Design and test of planar transformer using CMOS technology with BALUN applications
|
Chien-Chang Huang; Wei-Di Tu; Chia-Kai Chen |
| 元智大學 |
2012-10-24 |
Design and test of planar transformer using CMOS technology with BALUN applications
|
Chien-Chang Huang; Wei-Di Tu; Chia-Kai Chen |
| 朝陽科技大學 |
2020 |
Design and Test of Quad Cane Structure Design
|
趙方麟 |
| 元智大學 |
2011-08 |
Design and test of RF front end for UHF RFID tag
|
Chien-Chang Huang; Kai-Wei Ku |
| 元智大學 |
2011-08 |
Design and test of RF front end for UHF RFID tag
|
Chien-Chang Huang; Kai-Wei Ku |
| 臺大學術典藏 |
1995 |
Design and test results of a transition radiation detector for a Fermilab fixed target rare kaon decay experiment
|
YEE HSIUNG; YEE HSIUNG; YEE HSIUNG |
| 臺大學術典藏 |
2019-12-30T00:37:42Z |
Design and test results of a transition radiation detector for a Fermilab fixed target rare kaon decay experiment
|
Graham, G.E.; Graham, G.E.; YEE HSIUNG et al. |
| 國立成功大學 |
2000-01 |
Design and testing of a genetic algorithm neural network in the assessment of gait patterns
|
Su, Fong-Chin; Wu, Wen-Lan |
| 南台科技大學 |
2018-04-13 |
Design and testing of a high-performance range hood
|
Chia-Hsiang Su; Cheng-Wei Wu; Li-Ming Chu |
| 國立臺灣大學 |
2006 |
Design and testing of a multi- electrode electro-rheological damper
|
Kuo, W.H.; Wu, T.N.; Guo, J.; 江茂雄; Chen, Y.N. |
