| 淡江大學 |
2012-12 |
Optimal Design and Control of Solar Driven Air Gap Membrane Distillation Desalination Systems
|
Chen, Yih-hang; Li, Yu-wei; Chang, Hsaun |
| 淡江大學 |
2012-12 |
Optimal design and control of solar driven air gap membrane distillation desalination systems
|
Chen, Yih-Hang; Li, Yu-Wei; Chang, Hsuan |
| 淡江大學 |
2016-11-25 |
Optimal design and control of solar driven air gap membrane distillation desalination systems
|
宋振銓; 何啟東; 張煖; 陳逸航 |
| 淡江大學 |
2011-11-25 |
Optimal Design and Control of Solar Driven Direct Contact Membrane Distillation Desalination Systems
|
何啟東; Chen, Yih-hang; Chang, Shun-chieh |
| 淡江大學 |
2010-07-28 |
Optimal Design and Control Strategies of an Experimental Methane Steam Reformer
|
Lin, Dar-jong; Chang, Cheng-liang; Beltsios, Konstantinos; Cheng, Liao-ping |
| 臺大學術典藏 |
2020-01-06T03:08:24Z |
Optimal Design and Effective Control of Triple-Column Extractive Distillation for Separating Ethyl Acetate/Ethanol/Water with Multiazeotrope
|
Yang, A.; Zou, H.; Chien, I.-L.; Wang, D.; Wei, S.; Ren, J.; Shen, W.; I-LUNG CHIEN |
| 國立交通大學 |
2017-04-21T06:48:56Z |
OPTIMAL DESIGN AND EXPERIMENTAL VALIDATION OF A NEW NO-CUFF BLOOD PRESSURE SENSOR BASED ON A NEW FINITE ELEMENT MODEL
|
Tu, Tse-Yi; Chao, Paul C. -P.; Lee, Yung-Pin; Kao, Yung-Hua |
| 國立交通大學 |
2014-12-08T15:44:15Z |
Optimal design and experimental verification of a magnetically actuated optical image stabilization system for cameras in mobile phones
|
Chiu, Chi-Wei; Chao, Paul C. -P.; Kao, Nicholas Y. -Y.; Young, Fu-Kuan |
| 國立交通大學 |
2014-12-08T15:12:43Z |
Optimal design and fabrication of ITO/organic photonic crystals in polymer light-emitting diodes using a focused ion beam
|
Tsai, Che-Hung; Liao, Lun-De; Luo, Yi-Shiun; Chao, Paul C. -P.; Chen, En-Chen; Meng, Hsin-Fei; Chen, Wei-Dar; Lin, Shir-Kuan; Lin, Chin-Teng |
| 國立成功大學 |
2011-02 |
Optimal design and impact analysis of urban traffic regulations under ambient uncertainty
|
Wu, Yu-Ta; Chan, Kuei-Yuan |
| 國立交通大學 |
2014-12-08T15:38:30Z |
Optimal design and implementation of an omnidirectional panel speaker array using the genetic algorithm
|
Bai, MR; Kuo, JT |
| 國立成功大學 |
2023 |
Optimal Design and Manufacturing Process of Substrate-Free Surface Plasmon Nanolaser
|
Chou, Y.-H.;Chen, S.-C.;Cheung, W.-S. |
| 國立成功大學 |
2009-05 |
Optimal Design and Operation for a No-Moving-Parts-Valve (NMPV) Micro-Pump with a Diffuser Width of 500 mu m
|
Wang, Chin-Tsan; Leu, Tzong-Shyng; Sun, Jia-Ming |
| 臺大學術典藏 |
2021-10-07T08:52:37Z |
Optimal design and operation simulation analysis of absorption chill water storage air condition system driven by waste heat
|
Chih Chung Chang; Ching Hsien Lai; Wen Shing Lee; Sih Li Chen; SIH-LI CHEN |
| 國立交通大學 |
2014-12-08T15:33:41Z |
Optimal Design and Placement of Omni-Cameras in Binocular Vision Systems for Accurate 3-D Data Measurement
|
Shih, Shen-En; Tsai, Wen-Hsiang |
| 國立交通大學 |
2014-12-08T15:18:35Z |
Optimal design and synthesis of reverberators with a fuzzy user interface for spatial audio
|
Bai, MR; Bai, G |
| 國立成功大學 |
2016-05 |
Optimal design and system characterization of graphene sheets in a micro/nano actuator
|
Lai, Hsin-Yi;Hsu, Chi-Hua;Chen, Chao-Kuang |
| 國立臺灣科技大學 |
2013 |
Optimal design base shear forces for reinforced concrete buildings considering seismic reliability and life-cycle costs
|
Chiu, C.-K.;Jean, W.-Y.;Chuang, Y.-T. |
| 國立交通大學 |
2014-12-08T15:42:57Z |
Optimal design for a ball grid array wire bonding process using a neuro-genetic approach
|
Su, CT; Chiang, TL |
| 淡江大學 |
2013 |
Optimal Design for Accelerated Destructive Degradation Tests
|
Tsai, Chih-Chun; Tseng, Sheng-Tsaing; Balakrishnan, N.; Lin, Chien-Tai |
| 淡江大學 |
2013-06 |
Optimal Design for Accelerated Destructive Degradation Tests
|
林千代 |
| 淡江大學 |
2013-04-22 |
Optimal Design for Accelerated Destructive Degradation Tests
|
蔡志群 |
| 淡江大學 |
2020-12-05 |
Optimal Design for Accelerated-Stress Acceptance Test
|
Tsai, C. C.;Balakrishnan, N.;Lin, C. T. |
| 淡江大學 |
2020-12-05 |
Optimal Design for Accelerated-Stress Acceptance Test
|
Tsai, Chih-Chun;Lin, Chien-Tai;Balakrishnan, Narayanaswamy |
| 淡江大學 |
2015-06-03 |
Optimal design for accelerated-stress acceptance test based on wiener process
|
林千代 |
| 淡江大學 |
2014-06-11 |
Optimal Design for Accelerated-Stress Acceptance Test Based on Wiener Process
|
蔡志群 |
| 淡江大學 |
2015-06 |
Optimal Design for Accelerated-Stress Acceptance Test Based on Wiener Process
|
Tsai, Chih-Chun; Lin, Chien-Tai; Balakrishnan, N. |
| 淡江大學 |
2015-05-01 |
Optimal Design for Accelerated-Stress Acceptance Test Based on Wiener Process
|
Tsai, C. C.;Balakrishnan, N.;Lin, C. T. |
| 淡江大學 |
2006-01-01 |
Optimal Design for Accelerated-Stress Acceptance Test Based on Wiener Process
|
Tsai, C. C.;Balakrishnan, N.;Lin, C. T. |
| 國立臺灣大學 |
1998 |
Optimal design for curve estimation by local linear smoothing
|
Cheng, M.-Y.; Hall, P.; Titterington, D.M. |
| 淡江大學 |
2011-12-28 |
Optimal Design for Degradation Tests Based on Gamma Degradation Process with Random Effects
|
蔡志群 |
| 淡江大學 |
2012-10-31 |
Optimal Design for Degradation Tests Based on Gamma Processes With Random Effects
|
Tsai, Chih-Chun;Tseng, Sheng-Tsaing;Narayanaswamy, Balakrishnan |
| 國立成功大學 |
2012-02 |
Optimal Design for Delta-Sigma Modulators With Root Loci Inside Unit Circle
|
Liu, Jia-Ming; Chien, Shih-Hsiung; Kuo, Tai-Haur |
| 中原大學 |
2000-01 |
Optimal Design for Fuzzy Controllers by Genetic Algorithms
|
Yi-Sheng Zhou;Lin-Ying Lai |
| 淡江大學 |
2012-06 |
Optimal Design for Gamma Degradation Processes with Random Effects
|
Tsai, Chih-chun; Tseng, Sheng-tsaing; Narayanaswamy Balakrishnan |
| 淡江大學 |
2012-06-23 |
Optimal Design for Gamma Degradation Processes with Random Effects
|
蔡志群 |
| 國立臺灣大學 |
2009 |
Optimal design for hydraulic efficiency performance of free-water-surface constructed wetlands
|
Su, T.M.; Yang, S.C.; Lee, S.S.; Shih, H.Y. |
| 臺大學術典藏 |
2019-12-19T07:12:21Z |
Optimal design for hydraulic efficiency performance of free-water-surface constructed wetlands
|
Su, T.-M.; Yang, S.-C.; Shih, S.-S.; Lee, H.-Y.; HONG-YUAN LEE |
| 淡江大學 |
1999-11 |
Optimal design for LC harmonic filters
|
Chang, Y. C.; 蕭瑛東; Hsiao, Ying-tung |
| 淡江大學 |
2002-12 |
Optimal design for power system dynamic stabilizer by grey prediction PID control
|
Ding, Chian-chuang; Lee, King-tan; Tsai, Chee-ming; Huang, Tsong-liang |
| 修平科技大學 |
2004 |
Optimal Design for PPF Heat Sinks in Electronics Cooling Applications
|
Chen H. T.;Horng, J. T.;Chen, P. L.;Hung, Y. H. |
| 國立臺灣海洋大學 |
2015-04 |
Optimal Design for the Fluid Cavity Shape in Hydromechanical Fine Blanking
|
Guo-Ming Huang;Jang-Ping Wang;Te-Tsun Chen;Chia-Ling Chen;Ming-Hong Xu |
| 臺北醫學大學 |
2001 |
Optimal design for wall thickness of dental implants using finite element method.
|
黃豪銘; Huang; H.M.; Wu; L.D.; Lee; S.Y.; Pan L.C. |
| 臺大學術典藏 |
2019-05-14T00:35:37Z |
Optimal design in biodiesel production from esterification of palmitic acid in excess methanol
|
Chen B.-H.;Chan Y.-H.;Hi?p?ng T.;Lee D.-J.; Hi?p?ng T.; Chan Y.-H.; Chen B.-H.; Lee D.-J. |
| 國立臺北教育大學 |
2010-11 |
Optimal Design in Gear Ratio of a City Bike
|
游章雄;劉祖華 |
| 淡江大學 |
2004-09 |
Optimal design methodology of plate-fin heat sinks for electronic cooling using entropy generation strategy
|
Shih, C. J.; Liu, G. C. |
| 大葉大學 |
2007-03 |
Optimal Design of a 1 Kwe Thermal Plasma Reformer
|
Wang, C.S.;Chang, Y.C.;Hong, S.S;Lee, H.B.;Kuo, N.H.;Tsai, H.L.;Chang, K.I.;Kuo, C.H. |
| 大葉大學 |
2007-03 |
Optimal Design of a 1-kWe Thermal Plasma Reformer
|
Wang, C.S.;Chang, Y.C.;Hong, S.S.;Lee, Hung-Bin;Kuo, N.H.;Chang, K.I.;Kuo, C.H.;Tsai, H.L. |
| 國立臺灣海洋大學 |
2007-01 |
Optimal Design of a 1-kWe Thermal Plasma Reformer
|
C. S. Wang; Y.C. Chang; S.S. Hong; H.B. Lee; Huan-Liang Tsai; N.S. Kuoa; K. I. Chang; C.H. Kuo |
| 大葉大學 |
2007-06 |
Optimal Design of a 1kWe Thermal Plasma Reformer
|
Wang, C. S.;Chang, Y. C.;Hong, S. S.;Lee, H. B.;Kuo, N. H.;Tsai, H. L.;Chang, K. I.;Kuo, C. H. |
