| 國立成功大學 |
2024-02 |
Bubble entrainment and underwater noise caused by a single water drop falling on the surface of freshwater and saltwater
|
Huang;Ching-Jer;Yeh;Chih-Hui;Liu;Kuan-Wen |
| 國立中山大學 |
2008 |
Bubble Entrapped in Solid during Solidification
|
C.C. Hsiao; P.S. Wei; S.Y. Hsiao |
| 國立成功大學 |
2000-05 |
Bubble formation at an orifice in surfactant solutions under constant-flow conditions
|
Hsu, Shu-Hao; Lee, Wei-Hua; Yang, Yu-Min; Chang, Chien-Hsiang; Maa, Jer-Ru |
| 國立成功大學 |
2001-04 |
Bubble formation in catanionic surfactant solutions under constant-flow conditions
|
Yang, Yu-Min; Yeh, Shao-Jen; Hsiung, Chien-Kang; Chien, Chen-Lung; Chang, Chien-Hsiang; Maa, Jer-Ru |
| 元智大學 |
2020/10/23 |
Bubble Formation in Microfluidic Channels: An ANSYS CFD Study
|
郭許宏; Chang Y.-C. |
| 國立臺灣大學 |
1991-12 |
Bubble Forming on a Micro Line Heater
|
林立偉; Pisano, A. P.; Lin, Liwei; Pisano, A. P. |
| 國立交通大學 |
2018-08-21T05:53:51Z |
Bubble generation and molecular crystallization at solution surface by intense continuous-wave laser irradiation
|
Chen, Jim Jui-Kai; Yuyama, Ken-ichi; Sugiyama, Teruki; Masuhara, Hiroshi |
| 臺大學術典藏 |
2018-09-10T06:25:28Z |
Bubble growth and ink ejection process of a thermal ink jet printhead
|
PING-HEI CHEN;CHANG, SH;CHEN, WC;CHEN, PH;PING-HEI CHEN; CHEN, PH; CHEN, WC; CHANG, SH; PING-HEI CHEN |
| 國立臺灣大學 |
1997 |
Bubble Growth and Ink Ejection Process of a Thermal-Bubble-Jet Printhead
|
Chen, P.H.; Chen, W. C.; Chang, S.-H. |
| 臺大學術典藏 |
2021-10-14T03:38:56Z |
Bubble Growth and Ink Ejection Process of a Thermal-Bubble-Jet Printhead
|
Chen, P.H.; Chen W. C.; Chang S.-H.; PING-HEI CHEN |
| 國立臺灣大學 |
1997-01 |
Bubble growth and ink injection process of a thermal-bubble-jet printhead
|
Chen, Ping-Hei; Chen, W.C.; Chang, S. H. |
| 臺大學術典藏 |
1992 |
Bubble Interactions in Axisymmetric Thermocapillary Motion
|
Keh, Huan-Jang; Keh, Huan-Jang |
| 國立臺灣大學 |
1992 |
Bubble Interactions in Axisymmetric Thermocapillary Motion
|
葛煥彰; Keh, Huan-Jang |
| 臺大學術典藏 |
2008-12-10T02:48:43Z |
Bubble nucleation in microchannels: statistical mechanics approach
|
Lee, D. J.; Tien, Y.; Peng, X. F.; Peng, X. F.; Tien, Y.; Lee, D. J. |
| 國立臺灣大學 |
2001 |
Bubble nucleation in microchannels: statistical mechanics approach
|
Peng, X. F.; Tien, Y.; Lee, D. J. |
| 國家衛生研究院 |
2003-03 |
Bubble observation and transient pressure signals in mechanical heart valve cavitation study
|
Xu, LJ; Hock, YJ; Hwang, NHC |
| 臺大學術典藏 |
2020-01-13T08:23:59Z |
Bubble pump in a closed-loop system for electronic cooling
|
SIH-LI CHEN; Chen, S.-L.; Chang, C.-C.; Shih, C.-C.; Kuo, S.-C. |
| 大葉大學 |
2001-02 |
Bubble Size and System Pressure Effects on Phase Distribution for Two Phase Turbulent Bubbly Flows
|
Kuo, T. C.;Yang, A. S.;Chieng, C. C. |
| 義守大學 |
2005-12 |
Bubble size distribution and elastic retraction in crosslinked metallocene polyolefin elastomer foams
|
Horng-Jer Tai |
| 國立成功大學 |
2008 |
Bubble size distribution for waves propagating over a submerged breakwater
|
Tien, Tsung-Mo; Huang, Ching-Jer; Hsu, Tai-Wen |
| 國立屏東大學 |
2000 |
Bubble Sort Approach to Channel Routing
|
楊政興;S.S.Chen;S.J.Chen |
| 國立臺灣大學 |
2000 |
Bubble Sort Approach to Channel Routing
|
Chen, S.-S.; Yang, C.-H.; Chen, S.-J. |
| 國立臺灣大學 |
2003 |
Bubble sweeping and jet flows during nucleate boiling of subcooled liquids
|
Wang, H.; Peng, X. F.; Wang, B. X.; Lee, D. J. |
| 國立臺灣大學 |
2008-11 |
Bubble-free large-area replication of microstructures using gas-assisted UV embossing with modified reversal imprinting and gap-retained vacuuming
|
Huang, Po-Hsun; Huang, Tzu-Chien; Yang, Sen-Yeu |
| 臺大學術典藏 |
2020-01-13T08:18:11Z |
Bubble-free replication of large area microstructures using gas-assisted UV embossing with modified reversal imprinting and gap-retained vacuuming
|
Huang, Po-Hsun; Chen, Han-Ming; Huang, Tzu-Chien; Yang, Sen-Yeu; Sun, Yi-Ting; HAN-MING CHEN |
