| 國立中山大學 |
2009 |
Crack formation on Pd-plated Cu wire/Al pad interface
|
Y.W. Lin;Y.T. Chiu;K.L. Lin;Y.S. Lai |
| 國立成功大學 |
1999-08 |
Crack growth prediction by manifold method
|
Tsay, Ren-Jow; Chiou, Yaw-Jeng; Chuang, Wai-Lin |
| 國立成功大學 |
2000-02-29 |
Crack growth resistance of Cr3C2/Al2O3 composites
|
Huang, Jow-Lay; Lin, Ho-Don; Jeng, Ching-An; Lii, Ding-Fwu |
| 臺大學術典藏 |
2022-01-07T02:14:50Z |
Crack Growth Simulation and Residual Strength Prediction in Airplane Fuselages
|
Chen; C.-S.; Wawrzynek; P.A.; and Ingraffea; A. R.; CHUIN-SHAN CHEN |
| 大葉大學 |
2003-06 |
Crack Identification of a Beam on Measurements of Natural Frequencies
|
Ping, Lin Hai |
| 大葉大學 |
2003-12 |
Crack Identification of a Rod from Measurements of Natural Frequencies
|
Lin, Hai-Ping |
| 國立臺灣大學 |
2011 |
Crack Induced Self-Assembled Grooves for Liquid Crystal Molecules Alignment
|
Lin, Tzu-Chieh; Huang, Li-Chen; Chou, Tsu-Ruey; Chao, Chih-Yu |
| 臺大學術典藏 |
2018-09-10T08:36:31Z |
Crack induced self-assembled grooves for liquid crystal molecules alignment
|
Lin, T.-C.;Huang, L.-C.;Chou, T.-R.;Chao, C.-Y.; Lin, T.-C.; Huang, L.-C.; Chou, T.-R.; Chao, C.-Y.; CHIH-YU CHAO |
| 臺大學術典藏 |
2019-12-19T08:38:22Z |
Crack induced self-assembled grooves for liquid crystal molecules alignment
|
Lin, T.-C.;Huang, L.-C.;Chou, T.-R.;Chao, C.-Y.; Lin, T.-C.; Huang, L.-C.; Chou, T.-R.; Chao, C.-Y.; CHIH-YU CHAO |
| 國立臺灣大學 |
1992-03 |
Crack Initiation and Propagation of Austempered Ductile Iron and Its Properties
|
Weng, B. J.; 張順太; Liu H. N.; 許樹恩; Weng, B. J.; Chang, Shun-Tai; Liu H. N.; Hsu, Shu-En |
| 國立臺灣大學 |
1992-03 |
Crack Initiation and Propagation of SiC-fiber Reinforced Aluminum Composites
|
Weng, B. J.; 張順太; 許樹恩; Weng, B. J.; Chang, Shun-Tai; Hsu, Shu-En |
| 國立中山大學 |
1995 |
Crack Initiation Direction for a Crack under Mixed Mode Loading
|
J.H. Kuang; Y.C. Chen |
| 中華大學 |
2005 |
Crack initiation life prediction for solid cylinders with transverse circular holes under in-phase and out-of-phase multiaxial loading
|
任貽明; Jen, Yi-Ming |
| 國立臺灣海洋大學 |
2005 |
Crack Initiation Life Prediction for Solid Cylinders with Transverse Circular Holes under In-Phase and Out-of-Phase Multiaxial Loading
|
Jen, Yi-Mingï¼Wang, Wei-Wei |
| 國立中山大學 |
1996 |
Crack Initiation Load Characterization Using Critical Energy
|
J.H. Kuang; Y.C. Chen |
| 淡江大學 |
2002-09 |
Crack Propagation Analysis of Statically Indeterminate Beam by Elastic-Plastic Fracture Mechanics
|
Liu, Sung-po; Shih, C. J.; Kuo, Liang-yu |
| 國立成功大學 |
1999-04 |
Crack propagation behavior of A356 and Al-1Si-0.3Mg aluminum alloys under resonant vibration
|
Jiang, Don-Son; Lui, Truan-Sheng; Chen, Li-Hui |
| 臺大學術典藏 |
2022-09-21T23:30:06Z |
Crack Resistance Index and Mechanical Properties of New Generation High Performance Concrete
|
WEN-CHENG LIAO; Jhang, Jia Wei; Wu, Cheng Jun |
| 國立交通大學 |
2014-12-08T15:04:03Z |
CRACK SIZE IDENTIFICATION USING AN EXPANDED MODE METHOD
|
KAM, TY; LEE, TY |
| 淡江大學 |
1993-02-15 |
Crack tip elements for interface cracks in composite materials
|
劉昭華; Liu, Chao-hwa; Tsai, J. D. |
| 國立中山大學 |
1998 |
Crack Tip Plastic Zones Estimation Using Bueckner's Superposition
|
J.H. Kuang; C.K. Chen |
| 國立臺灣科技大學 |
2015 |
Crack-based damage assessment method for HSRC shear-critical beams and columns
|
Chiu, C.-K.;Sihotang, F.;Darwin, D. |
| 國立臺灣科技大學 |
2019 |
Crack-based damage quantification for shear-critical HSRC column members using piezoceramic transducers
|
Chiu, Chiu C.-K.;Sugianto, Sugianto S.;Liao, W.-I.;Ho, C.-E. |
| 國立臺灣大學 |
2005 |
Crack-free direct-writing on glass using a low-power UV laser in the manufacture of a microfluidic chip
|
Cheng, Ji-Yen; Yen, Meng-Hua; Wei, Cheng-Wey; Chuang, Yung-Chuan; Young, Tai-Horng |
| 臺大學術典藏 |
2020-02-27T03:57:38Z |
Crack-free direct-writing on glass using a low-power UV laser in the manufacture of a microfluidic chip
|
Cheng J.-Y;Yen M.-H;Wei C.-W;Chuang Y.-C;Tai-Horng Young; Cheng J.-Y; Yen M.-H; Wei C.-W; Chuang Y.-C; Tai-Horng Young |
