| 國立臺灣科技大學 |
2012 |
Design and consideration of integrated PLC and 3G mobile networks as internet of things architecture
|
Hsieh, H.C.;Lai, C.H.;Larosa, Y.T. |
| 國立高雄應用科技大學 |
2009 |
Design and Construction of a Heat Collection Solar Tracker with Constant Focal Distance for Solar Stirling Engine Application
|
Cheng, T. C.; Cheng, C. H.; Mou, Y. H.; Yu, Y. J.; Chang, K. C.; Shih, S. J.; Lee, T. S.; Chung, K. M. |
| 國家衛生研究院 |
2008-04 |
Design and construction of a hemodynamic simulator for studying vascular endothelial responses to hemodynamic forces
|
Lo, SW;Chen, TH;Lo, LW;Chiu, JJ |
| 國立臺灣大學 |
1994 |
Design and Construction of a Pulsed Field-Gradient NMR Probe for a High-Field Superconducting Magnet
|
卜威廉; 張文宗; 郭偉明; 黃?平 |
| 國立臺灣科技大學 |
2015 |
Design and construction of a variables multiple dependent state sampling plan based on process yield
|
Wu, C.-W.;Liu, S.-W.;Lee, A.H.I. |
| 國立臺灣科技大學 |
2014 |
Design and construction of a variables repetitive group sampling plan for unilateral specification limit
|
Liu S.-W., Wu C.-W. |
| 國立臺灣科技大學 |
2019 |
Design and construction of a variables switch-based sampling system for product acceptance determination
|
Wu, C.-W.;Liu, S.-W.;Chen, J.-T.;Lin, J.-J. |
| 國立高雄應用科技大學 |
2010 |
Design and Construction of a Virtual Reality Wire Cut Electrical Discharge Machining System
|
Kao, Yung-Chou; Tsai, Jo-Peng; Cheng, Hsin-Yu; Chao, Chia-Chung |
| 國立交通大學 |
2014-12-08T15:40:11Z |
Design and construction of an in situ inspection machine for ensuring the dynamic performance of fluid bearings in data storage devices
|
Chao, Paul C. -P.; Chiu, Chi-Wei; Huang, J. -S.; Chen, Chien-Ming |
| 中原大學 |
2009 |
Design and construction of an in situ inspection machine for ensuring the dynamic performance of fluid bearings in data storage devices
|
Paul C.-P. Chao; Chi-Wei Chiu; J.-S. Huang; Chien-Ming Chen |
| 國立交通大學 |
2018-01-01 |
Design and Construction of an Intelligent Stacking Cone Upper Limb Rehabilitation System
|
Chiu, Ya-Hui; Yen, San-Feng; Lin, Shien-Fong |
| 淡江大學 |
2004-11 |
Design and construction of linear laser encoders that possess high tolerance of mechanical runout
|
Lee, Chih-Kung; Wu, Chyan-Chyi; Chen, Shih-Jui; Yu, Liang-Bin; Chang, You-Chia; Wang, Yeong-Feng, Chen, Jau-Yu; Wu, Jeremy Wen-Jong |
| 臺大學術典藏 |
2018-06-29T00:18:32Z |
Design and Construction of Linear Laser Encoders That Possess High Tolerance of Mechanical Runout
|
Wu, Jeremy Wen-Jong; Chen, Jau-Yu; Wang, Yeong-Feng; Chang, You-Chia; Yu, Liang-Bin; Chen, Shih-Jui; Wu, Chyan-Chyi; Lee, Chih-Kung; Lee, Chih-Kung; Wu, Chyan-Chyi; Chen, Shih-Jui; Yu, Liang-Bin; Chang, You-Chia; Wang, Yeong-Feng; Chen, Jau-Yu; Wu, Jeremy Wen-Jong |
| 國立臺灣大學 |
2004 |
Design and Construction of Linear Laser Encoders That Possess High Tolerance of Mechanical Runout
|
Lee, Chih-Kung; Wu, Chyan-Chyi; Chen, Shih-Jui; Yu, Liang-Bin; Chang, You-Chia; Wang, Yeong-Feng; Chen, Jau-Yu; Wu, Jeremy Wen-Jong |
| 臺大學術典藏 |
2020-04-28T07:12:31Z |
Design and construction of linear laser encoders that possess high tolerance of mechanical runout
|
Wu, J.W.-J.; CHIH-KUNG LEE; Chen, J.-Y.; Wang, Y.-F.; Chang, Y.-C.; Wu, C.-C.; Chen, S.-J.; Yu, L.-B.; Lee, C.-K. |
| 國立臺灣大學 |
2006 |
Design and construction of novel gene promoters for the generation of stress tolerant plants without yield penalty
|
Tuan-hua David Ho; Hong, Chwan-Yang; Ming-Tsair Chan; Su-May Yu |
| 國立臺灣海洋大學 |
2016-09 |
Design and Construction of Secure Digital Will System
|
Yih-Sen Chen; Han-Yu Lin; Tzong-Sun Wu |
| 臺大學術典藏 |
2019-12-26T06:40:09Z |
Design and construction of the BESIII detector
|
Ablikim, M.; Ablikim, M.; PISIN CHEN |
| 國立彰化師範大學 |
2007-11 |
Design and Construction of Virtual Oscilloscope by Using ELVIS
|
Yao, Kai-chao |
| 國立成功大學 |
2002-10 |
Design and control for an electromagnetically driven X-Y-theta stage
|
Chen, Kuo-Shen; Trumper, D. L.; Smith, S. T. |
| 國立臺灣大學 |
2004 |
Design and control for recycle plants with heat-integrated separators
|
Lin, Shih-Wen; Yu, Cheng-Ching |
| 淡江大學 |
2021-09-10 |
Design and Control of 6-DOF Robotic Manipulator Driven by Pneumatic Muscles and Motor
|
Lee, L.W.;Lu, L.Y.;Li, I.H.;Lee, C.-W.;Su, T.-J. |
| 育達商業科技大學 |
2001 |
Design and Control of a 2-D Telerobotic System with a Haptic Interface
|
M.G.Her;M.Karkoub;K.S.Hsu;T.S.Lan |
| 臺大學術典藏 |
2018-09-10T04:53:37Z |
Design and control of a 2-dimensional electro-magnetic suspension actuator
|
Chen, M.-Y.; Tsai, C.-F.; Fu, L.-C.; LI-CHEN FU |
| 淡江大學 |
2018-07-10 |
Design and Control of a 3-DOF Translational Parallel Manipulator with Three Horizontal-Axial Pneumatic Actuators
|
Chi, K.-H.;Lin, M.-W.;Lee, L.-W.;Li, I-H.;Chiang, H.-H. |
