| 國立成功大學 |
2015-01-01 |
Fabrication AlGaN/GaN MIS UV Photodetector by H2O2 Oxidation
|
Liu, Han-Yin; Hsu, Wei-Chou; Chou, Bo-Yi; Wang, Yi-Hsuan |
| 淡江大學 |
2019-04-16 |
Fabrication and 3D Patterning of Bio-Composite Consisting of Carboxymethylated Cellulose Nanofibers and Cobalt Ferrite Nanoparticles
|
Pong, W.F. |
| 國立交通大學 |
2014-12-08T15:02:23Z |
Fabrication and analyses of negative-birefringent thin film compensator with characteristic matrix
|
Yoo, JC; Shieh, HPD |
| 國立交通大學 |
2019-04-02T05:58:28Z |
Fabrication and analyses of negative-birefringent thin film compensator with characteristic matrix
|
Yoo, JC; Shieh, HPD |
| 國立中山大學 |
2006 |
Fabrication and analysis of a magnetic self-power microgenerator
|
C.T. Pan; Y.M. Hwang; H.L. Hu; H.C. Liu |
| 國立成功大學 |
2008-11 |
Fabrication and analysis of a micro-machined tri-axis gyroscope
|
Tsai, Nan-Chyuan; Sue, Chung-Yang |
| 淡江大學 |
2009 |
Fabrication and analysis of aluminum vapor chamber heat spreaders
|
洪裕勛; Hung, Yu-hsun |
| 國立高雄師範大學 |
1995 |
Fabrication and analysis of camel-gate field-effect transistors (CAMFET’s) with active doping channel profiles
|
Jung-Hui Tsai;Wen-Chau Liu;Lih-Wen Laih;Kong-Beng Thei;Cheng-Zu Wu;Wen-Shiung Lour;Rong-Chau Liu; 蔡榮輝 |
| 國立聯合大學 |
2006 |
Fabrication and analysis of flow rate of parallel piezoelectric micropumps
|
C. H. Chang, H. Hocheng, Y. H. Guu |
| 淡江大學 |
2008-11 |
Fabrication and Analysis of Heat Dissipation Module for High-Power Light Emitting Diode Streetlamp
|
康尚文; Kang, Shung-wen; Chien, Kun-cheng; Chou, Yen-chih |
| 國立成功大學 |
2008-02-15 |
Fabrication and analysis of ionic conductive polymer films for micro drug delivery systems
|
Tsai, Nan-Chyuan; Sue, Chung-Yang |
| 國立臺灣科技大學 |
2009 |
Fabrication and analysis of microfluidic mold insert by micro electrical discharge machining
|
Lee J.-L.; Shen Y.-K.; Lin Y.; Teng P.-T.; Huang C.-M. |
| 國立成功大學 |
2019-11 |
Fabrication and analysis of PiG-based LEDs with WO3-doped TeO2-based glass
|
Nien;Li-Fang;Huang;Chien-Hao;Chiang;Chung-Hao;Chen;Chen-Jung;Hong;Cheng-Shong;Nien;Hsiau-Hsian;Chu;Sheng-Yuan |
| 淡江大學 |
2008 |
Fabrication and analysis of pulsating heat pipes (PHPs)
|
林玉興; Lin, Yu-hsing |
| 中原大學 |
2002-05 |
Fabrication and Analysis of SnO/sub 2//ITO/Glass Array pH Sensor
|
熊慎幹;Chiang, Jing-Sheng;Chou, Jung-Chuan;Pan, Chung-We;Sun, Tai-Ping Hsiung, Shen-Kan |
| 國立成功大學 |
2007-03 |
Fabrication and analysis of the reflowed microlens arrays using JSR THB-130 N photoresist with different heat treatments
|
Chung, Chen-Kuei; Hong, Y. Z. |
| 國立彰化師範大學 |
2008 |
Fabrication and analysis of ZnO thin film bulk acoustic resonators
|
Lin, Yi- Cheng ; Hong, C. R. ; Chuang, H. A. |
| 淡江大學 |
2015-11-18 |
Fabrication and Application of a Customized Mini-Screw Surgical Template Using Image Superimposition and Rapid Prototyping
|
Wang, Y.T.;Hsu, P.H.;Wang, H.W.;Cheng, W.J.;Liu, P.Y.;Lin, C.L. |
| 國立臺灣大學 |
1991 |
Fabrication and Application of a Needle-Type Glucose Sensor
|
陳建源; Tamiya, E.; Gotoh, M.; Nakabayashi, N.; Karube, I.; Chen, Chien-Yuan; Tamiya, E.; Gotoh, M.; Nakabayashi, N.; Karube, I. |
| 國立臺灣科技大學 |
2012 |
Fabrication and application of amperometric glucose biosensor based on a 11el PtPd bimetallic nanoparticle decorated multi-walled carbon nanotube catalyst
|
Chen, Kuan-Jung;Lee, Chia-Feng;Rick, John;Wang, Shih-Han;Liu, Chung-Chiun;Hwang, Bing-Joe |
| 國立臺灣科技大學 |
2012 |
Fabrication and application of amperometric glucose biosensor based on a novel PtPd bimetallic nanoparticle decorated multi-walled carbon nanotube catalyst
|
Chen, K.-J.;Lee, C.-F.;Rick, J.;Wang, S.-H.;Liu, C.-C.;Hwang, B.-J. |
| 義守大學 |
2012-03-15 |
Fabrication and application of amperometric glucose biosensor based on a novel PtPd bimetallic nanoparticle decorated multi-walled carbon nanotube catalyst
|
Kuan-Jung Chen;Chia-Feng Lee;John Rick;Shih-Han Wang;Chung-Chiun Liu;Bing-Joe Hwan |
| 臺大學術典藏 |
2020-01-06T03:07:52Z |
Fabrication and application of coaxial polyvinyl alcohol/chitosan nanofiber membranes
|
Kuo, T.-Y.; Jhang, C.-F.; Lin, C.-M.; Hsien, T.-Y.; Hsieh, H.-J.; HSYUE-JEN HSIEH |
| 國立成功大學 |
2020 |
Fabrication and application of GaAs-on-insulator structure prepared through liquid-phase chemical-enhanced oxidation
|
Chen, Y.-S.;Kao, C.-Y.;Lee, K.-W.;Wang, Y.-H. |
| 臺大學術典藏 |
2018-09-10T09:18:27Z |
Fabrication and application of iron(III)-oxide nanoparticle/ polydimethylsiloxane composite cone in microfluidic channels
|
JIASHING YU; Liang, Dao; Hsieh, Meng-Lun; Jeng, Yung-Ming; Yu, Jiashing; Shih, Po-Jen; Chuang, Lee-Ming; Shih, Wen-Pin; 鄭永銘; 莊立民; 張以承; Wu, Ming-Dao; Hee, Siow-Wey; W.-P."; Huang, C.-C.; Wu, M.-D.; Liang, D.; Yu, J.; Shih, P.-J.; Shih, W.-P.; WEN-PIN SHIH; Chang, Yi-Cheng; Huang, Cheng-Chun |
| 臺大學術典藏 |
2020-02-26T01:36:48Z |
Fabrication and application of iron(III)-oxide nanoparticle/ polydimethylsiloxane composite cone in microfluidic channels
|
Huang, C.-C.; Wu, M.-D.; Liang, D.; Yu, J.; Shih, P.-J.; Shih, W.-P.; PO-JEN SHIH |
| 國立臺灣大學 |
2012 |
Fabrication and application of iron(III)-oxide nanoparticle/polydimethylsiloxane composite cone in microfluidic channels
|
Huang, Cheng-Chun; Wu, Ming-Dao; Liang, Dao; Yu, Jiashing; Shih, Po-Jen; Shih, Wen-Pin |
| 國立臺灣大學 |
2011 |
Fabrication and application of iron-oxide nanoparticle/PDMS cone in lab on a chip
|
Huang, Cheng-Chun; Wu, Ming-Dao; Wang, Yu-Chi; Shih, Wen-Pin |
| 國立臺灣大學 |
2001 |
Fabrication and application of LSC-mode super-RENS
|
Lin, Wei Chih; Yu Hsuan Lin; Chang, Hsun Hao; Yuan Hsing Fu; Chain Wen Huang; Tsai, Din Ping |
| 臺大學術典藏 |
2020-01-13T08:23:15Z |
Fabrication and application of nanostructures using gas-assisted hot embossing and self-assembled nanospheres
|
Hong, R.-H.; Cih, C.; Shu, T.-C.; Yang, S.-Y.; SEN-YEU YANG |
| 國立臺灣海洋大學 |
2003-10 |
Fabrication and Application of Surface Acoustic Wave Bio Sensors
|
Sheen;Jyh-Jong;Yang;Chi-Rong;Lin;I-Shang |
| 國立臺灣大學 |
1980 |
Fabrication and Application of the Bite Plane Splint
|
蕭裕源; SHIAU, YUH-YUAN |
| 臺大學術典藏 |
2020-01-13T08:23:14Z |
Fabrication and applications of ultraflexible nanostructures using dielectric heating-assisted nanoimprint on PVC films
|
Wu, T.-Y.; Tsai, P.-C.; Lo, S.-C.; Li, Y.-R.; Lee, K.-L.; Yang, S.-Y.; Wei, P.-K.; SEN-YEU YANG |
| 臺大學術典藏 |
2007-10 |
Fabrication and Assembly of A Monolithic 3D CMUT Array for Imaging Applications
|
PAI-CHI LI; M. Wang; P.-C. Li; I-M. Shen; J. Chen; X. Cheng |
| 國立暨南國際大學 |
2002 |
Fabrication and assembly scheduling in a two-machine flowshop?
|
林妙聰; Lin, BMT |
| 臺大學術典藏 |
2020-02-26T01:33:39Z |
Fabrication and biocompatibility of a porous bioglass ceramic in a Na 2 OCaOSiO 2 P 2 O 5 system
|
Feng-Huei LinLin, F.-H.;Huang, Y.-Y.;Hon, M.-H.;Wu, S.-C.; Lin, F.-H.; Huang, Y.-Y.; Hon, M.-H.; Wu, S.-C.; FENG-HUEI LIN |
| 國立臺灣大學 |
1991 |
Fabrication and biocompatibility of a porous bioglass ceramic in a Na2O---CaO---SiO2---P2O5 system
|
Lin, Feng-Huei; Huang, Yi-You; Hon, Min-Hsiung; Wu, Shih-Ching |
| 臺大學術典藏 |
2020-02-27T03:16:08Z |
Fabrication and biocompatibility of a porous bioglass ceramic in a Na2OCaOSiO2P2O5 system
|
Lin F.-H;Yi-You Huang;Hon M.-H;Wu S.-C.; Lin F.-H; YI-YOU HUANG; Hon M.-H; Wu S.-C. |
| 國立交通大學 |
2014-12-08T15:08:04Z |
Fabrication and carbon monoxide sensing characteristics of mesostructured carbon gas sensors
|
Liu, Chueh-Yang; Chen, Chia-Fu; Leu, Jih-Perng; Lu, Chih-Cheng; Liao, Kuan-Hsun |
| 國立成功大學 |
2009 |
Fabrication and Cell Affinity of Poly(vinyl alcohol) Nanofibers via Electrospinning
|
Nien, Yu-Hsun; Chen, Zheng-Bao; Liang, Jen-I; Yeh, Ming-Long; Hsu, Horng-Chaung; Su, Fong-Chin |
| 臺北醫學大學 |
2006 |
Fabrication and Cell Behavior of Micro- and Nano-fibrous Scaffolds of PBSA and PLLA Produced by Electrospinning
|
曾厚; Tseng H |
| 臺北醫學大學 |
2006 |
Fabrication and cell behaviors of micro/nano-fibrous scaffolds of PBSA and PLLA produced by electrospinning
|
曾厚; Tseng H; Hu HT; Sheu MT; Ho YS; ; |
| 國立中山大學 |
2002-03 |
Fabrication and Characteri- zation of A New Planar Solid-State Reference Electrode for ISFET Sensors
|
I-Yu Huang; Ruey-Shing Huang |
| 南亞技術學院 |
2013-09-02 |
Fabrication and characterisation of high performance polypyrrole modified microarray sensor for ascorbic acid determination
|
Samseya, J.; Srinivasan, R.; Chang, Yu-Tsern; Tsao, Cheng-Wen; Vasantha, V.S. |
| 朝陽科技大學 |
2014-12 |
Fabrication and Characteristics of 8YSZ/Ni Functionally Graded Materials by Applying Spark Plasma Sintering Procedure
|
EL-Wazery, Mahmoud Samir; EI-Desouky, Ahmed Reffat |
| 國立交通大學 |
2014-12-08T15:36:36Z |
Fabrication and characteristics of a GaN-based microcavity laser with shallow etched mesa
|
Lai, Ying-Yu; Chou, Yu-Hsun; Wu, Yu-Sheng; Lan, Yu-Pin; Lu, Tien-Chang; Wang, Shing-Chung |
| 國立交通大學 |
2019-04-02T06:00:51Z |
Fabrication and characteristics of a GaN-based microcavity laser with shallow etched mesa
|
Lai, Ying-Yu; Chou, Yu-Hsun; Wu, Yu-Sheng; Lan, Yu-Pin; Lu, Tien-Chang; Wang, Shing-Chung |
| 臺大學術典藏 |
2018-07-06T10:06:01Z |
Fabrication and Characteristics of AlGaAs/GaAs Heterojunction Bipolar Transistors (HJBT's) Using a New Emitter-Edge-Thinning Design
|
Ting, Jing-Lung; Lin, Hao-Hsiung; Lee, Si-Chen; Ting, Jing-Lung; 林浩雄; 李嗣涔; Ting, Jing-Lung; Lin, Hao-Hsiung; Lee, Si-Chen |
| 國立臺灣大學 |
1989 |
Fabrication and Characteristics of AlGaAs/GaAs Heterojunction Bipolar Transistors (HJBT's) Using a New Emitter-Edge-Thinning Design
|
Ting, Jing-Lung; 林浩雄; 李嗣涔; Ting, Jing-Lung; Lin, Hao-Hsiung; Lee, Si-Chen |
| 國立臺灣大學 |
2011 |
Fabrication and characteristics of an ultra-thin carbon nanotube/parylene membrane at large strain
|
Lee, Chi-Jung; Wu, Ming-Dao; Tsai, Yao-Chuan; Shih, Wen-Pin |
