| 亞洲大學 |
2007-10 |
Manufacture and Character Evaluations of Skin-like Weft Knitted Fabric
|
林敬文;Lin, Ching-wen |
| 嘉南藥理大學 |
2018-07-01 |
Manufacture and characterization of anti-inflammatory liposomes from jumbo flying squid (Dosidicus gigas) skin phospholipid extraction
|
Kao, Yi-Feng; Wu, Yi-Hsieng Samuel; Chou, Chung-Hsi; Fu, Shih-Guei; Liu, Cheng-Wei; Chai, Huey-Jine; Chen, Yi-Chen |
| 中國醫藥大學 |
2013-10 |
Manufacture and Effectiveness Evaluations of High-Modulus EMI Shielding/Puncture Resisting Composites
|
(Ting-Ting Li);(Rui Wang);(Ching-Wen Lou);(Mei-Chen Lin);林佳弘(Jia-Horng Lin)* |
| 亞洲大學 |
2019-01 |
Manufacture and evaluations of stainless steel/rayon/ bamboo charcoal functional composite knits
|
Hsi, Pei-Chen;Hsiao, Pei-Chen;林青玫;Chao-Tsang, L;Lu, Chao-Tsang;Yin, Wei;Yin, Wei;黃于恬;Huang, Yu-Tien;Li, Jia-Horng;Lin, Jia-Horng |
| 亞洲大學 |
2019-01 |
Manufacture and evaluations of stainless steel/rayon/bamboo charcoal functional composite knits
|
Hsi, Pei-Chen;Hsiao, Pei-Chen;林青玫;Chao-Tsang, L;Lu, Chao-Tsang;Yin, Wei;Yin, Wei;黃于恬;Huang, Yu-Tien;林佳弘;Lin, Jia-Horng |
| 亞洲大學 |
2019-10 |
Manufacture and evaluations of stainless steel/rayon/bamboo charcoal functional composite knits
|
蕭沛宸;Hsiao, Pei-Chen;林青玫;Lu, Chao-Tsa;Lu, Chao-Tsang;Yin, Wei;Yin, Wei;黃于恬;Huang, Yu-Tien;林佳弘;Lin, Jia-Horng |
| 亞洲大學 |
2008-10 |
Manufacture and Performance Evaluation of Elastic/Bamboo Wrapped Yarn
|
林青玫;LIN, CHIN-MEI |
| 國立臺灣科技大學 |
2012 |
Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete
|
Bui, L.A.-T.;Hwang, C.-L.;Chen, C.-T.;Lin, K.-L.;Hsieh, M.-Y. |
| 國立臺灣科技大學 |
2012 |
Manufacture and performance of lightweight aggregate from municipal solid waste incinerator fly ash and reservoir sediment for self-consolidating lightweight concrete
|
Hwang, C.-L.;Bui, L.A.-T.;Lin, K.-L.;Lo, C.-T. |
| 淡江大學 |
2019-09-30 |
Manufacture and Test of a High Temperature Heat Pipe
|
Kang, Shung-Wen;Yeh, Huan-Ming;Tsai, Meng-Chang;Wu, His-Hsiang |
| 臺大學術典藏 |
2019-10-05T07:43:42Z |
Manufacture characterization of anti-inflammatory liposomes from jumbo flying squid (Dosidicus gigas) skin phospholipid extraction
|
Yi-Feng Kao;Yi-Hsieng Samuel Wu;Chung-Hsi Chou;Shih-Guei Fu;Cheng-Wei Liu;Huey-Jine Chai;Yi-Chen Chen; Yi-Feng Kao; Yi-Hsieng Samuel Wu; Chung-Hsi Chou; Shih-Guei Fu; Cheng-Wei Liu; Huey-Jine Chai; Yi-Chen Chen; YI-CHEN CHEN? |
| 國立交通大學 |
2014-12-16T06:14:18Z |
Manufacture method of a multilayer structure having non-polar a-plane {11-20} III-nitride layer
|
Lee Wei-I; Chen Jenn-Fang; Chiang Chen-Hao |
| 淡江大學 |
1999-10-20 |
Manufacture method of microstructure with high aspect ratio
|
Lin, Ching-Bin |
| 國立交通大學 |
2014-12-16T06:15:33Z |
MANUFACTURE METHOD OF MULTILAYER STRUCTURE HAVING NON-POLAR A-PLANE III-NITRIDE LAYER
|
Lee, Wei-I; Chen, Jenn-Fang; Chiang, Chen-Hao |
| 淡江大學 |
2009-02 |
Manufacture of a polyaniline nanofiber ammonia sensor integrated with a readout circuit using the CMOS-MEMS technique
|
Liu, Mao-chen; Dai, Ching-liang; Chan, Chih-hua; Wu, Chyan-chyi |
| 國立高雄應用科技大學 |
2009 |
Manufacture of an Integrated Three-Dimensional Structure Nozzle Plate Using Microinjection Molding for a 1200-dpi Inkjet Printhead
|
Shen, Sheng-Chih; Wang, Min-Wen; Lee, Chung-Jui |
| 國立成功大學 |
2009-02 |
Manufacture of an Integrated Three-Dimensional Structure Nozzle Plate Using Microinjection Molding for a 1200-dpi Inkjet Printhead
|
Shen, Sheng-Chih; Wang, Min-Wen; Lee, Chung-Jui |
| 中國文化大學 |
2020-09 |
Manufacture of biaxially-oriented polyamide 6 (BOPA6) films with high transparencies, mechanical performances, thermal resistance, and gas blocking capabilities
|
Liu, LC (Liu, Lung-Chang); Lai, CC (Lai, Chiu-Chun); Lu, MT (Lu, Min-Tsung); Wu, CH (Wu, Chih-Hung); Chen, CM (Chen, Chien-Ming) |
| 育達商業科技大學 |
2011 |
Manufacture of Biodiesel by Transerification Reaction with Alkali Process from Waste Cooking Oil
|
呂, 嘉弘;Jai Houng , Leu |
| 國立臺灣科技大學 |
2010 |
Manufacture of brightness enhancement films (BEFs) by ultraviolet (UV) irradiation and their applications for organic light emitting diodes (OLEDs)
|
Lin J.-S.;Lin S.-H.;Chen N.-P.;Ko C.-H.;Tsai Z.-S.;Juang F.-S.;Chen C.-M.;Liu L.-C. |
| 元智大學 |
2010-07 |
Manufacture of brightness enhancement films (BEFs) by ultraviolet (UV) irradiation and their applications for organic light emitting diodes (OLEDs)
|
林建憲; 陳念波; 柯正浩; Shih-Hsun Lin; Zong-Sian Tsai; Fuh-Shyang Juang; Chen-Ming Chen; Lung-Chang Liu |
| 元智大學 |
2010-07 |
Manufacture of brightness enhancement films (BEFs) by ultraviolet (UV) irradiation and their applications for organic light emitting diodes (OLEDs)
|
林建憲; 陳念波; 柯正浩; Shih-Hsun Lin; Zong-Sian Tsai; Fuh-Shyang Juang; Chen-Ming Chen; Lung-Chang Liu |
| 國立臺灣大學 |
1953 |
Manufacture of Compound Fertilizer by Acidulation of Rock Phosphate with Mixed Acids of Nitric and Phosphoric Acids
|
韓隆華; 羅洪新; 陳世閭 |
| 國立臺灣大學 |
1985-11 |
Manufacture of Compreg by Radio-Frequency Heating Technique
|
蔡金木; Tsai, Ching-Mu |
| 國立臺灣海洋大學 |
2011 |
Manufacture of directional conduits through a lyophilizing and Wire-heating process
|
黃意真; Yi-Cheng Huang |
