| 淡江大學 |
2007 |
Optimal Design of Corrugated Cellular Plastic Foam with Semi-elliptical Shaped Upper Surface by Finite Element Frequency Domain Acoustic Analysis
|
蔡慧駿; Tsay, Huoy-shyi; Yeh, Fung-huei |
| 國立聯合大學 |
2007 |
Optimal design of coupling waveguide structure for adiabati coptical directional full couplers weighted by sin-square and raised-cosine functions
|
Chi-Feng Chen, Yun-Sheng Ku, Tsu-Te Kung |
| 國立交通大學 |
2014-12-08T15:17:29Z |
Optimal Design of CPW Slot Antennas Using Taguchi's Method
|
Weng, Wei-Chung; Choi, Charles T. M. |
| 國立暨南國際大學 |
2009 |
Optimal Design of CPW Slot Antennas Using Taguchi's Method?
|
翁偉中; Weng, WC |
| 淡江大學 |
2002-05-01 |
Optimal design of degradation tests in presence of cost constraint
|
Wu, Shuo-jye; Chang, Chun-tao |
| 臺北醫學大學 |
1999 |
Optimal design of dental implants using finite element analysis
|
鄭信忠; 李勝揚; 林哲堂; Lin C T; Lee S Y; Ke T H; Wu L D; Cheng Hsin-Chung |
| 國立高雄第一科技大學 |
2006.06 |
Optimal design of digital IIR filters by using hybrid Taguchi genetic algorithm
|
Tsai,Jinn-Tsong;Chou, Jyh-Horng |
| 國立屏東大學 |
2006 |
Optimal Design of Digital IIR Filters Using Hybrid Taguchi Genetic Algorithm
|
蔡進聰;J.T.Tsai;J.H.Chou;T.K.Liu |
| 國立臺灣大學 |
1970 |
Optimal Design of Discrete Process Control System by Dynamic Programming Ⅰ:Process Optimization
|
趙榮澄; Chao, Yung-Cheng |
| 國立臺灣大學 |
1973 |
Optimal Design of Discrete Process Control System by Dynamic Programming Ⅱ:Load Optimization
|
趙榮澄; 黃孝平; Chao, Yung-Cheng; Huang, Hsiao-Ping |
| 國立臺灣大學 |
1974 |
Optimal Design of Discrete Process Control System by Dynamic Programming Ⅲ:Control Gain Optimization
|
趙榮澄; 黃孝平; Chao, Yung-Cheng; Huang, Hsiao-Ping |
| 國立臺灣科技大學 |
2007 |
Optimal design of discrete-value passive harmonic filters using sequential neural-network approximation and orthogonal array
|
Chang, Y.-P.;Low, C.;Wu, C.-J. |
| 國立政治大學 |
2005 |
optimal design of e-bar and S square control charts for dependent process steps
|
楊素芬 |
| 國立成功大學 |
2017-05~2017-08 |
Optimal design of fatigue life for RCP with PoP package by using the Taguchi method
|
Cheng;Hsin-En;Chen;Rong-Sheng |
| 中原大學 |
1999 |
Optimal Design of Filament Winding Using Neural Network Experimental Design Scheme (SCI)
|
Junghui Chen;Shi-Shang Jang;David Shan Hill Wong;Chen-Chi M. Ma.;Jia -Min Lin |
| 大葉大學 |
2005-08 |
Optimal Design of Filament Wound Composite Pressure Vessels
|
Teng, T. L.;Yu, C. M.;Wu, Y. Y. |
| 國立東華大學 |
2005-05 |
Optimal design of fine magnetic pole pitch fabricated on printed circuit board
|
Huang, D. R.; Chiu, K. C.; Hsieh, H. P. |
| 國立交通大學 |
2014-12-08T15:19:09Z |
Optimal design of fine magnetic pole pitch fabricated on printed circuit board
|
Chiu, KC; Huang, DR; Shieh, HPD |
| 國立臺灣海洋大學 |
2011 |
Optimal Design of Flap Type Wave Energy Converter
|
Chou, Y. C.；Lin, C. C |
| 淡江大學 |
1985-08 |
Optimal design of flat-plate thermal diffusion columns with fixed plate-surface area
|
Yeh, Ho-ming; Yang, Fuh-tsorng; Yang, Shyh-ching |
| 淡江大學 |
1972-09 |
Optimal design of flat-plates thermal deffusion columns
|
葉和明; Yeh, Ho-ming; Chu, Tien-yung; Tsai, Chang-shou |
| 國立臺灣大學 |
1993 |
Optimal design of flux observer in induction machines
|
Wang, Chi-Hsiang; Lin, Wei-Song |
| 義守大學 |
2006-09 |
Optimal design of Fresnel lens for a reading light system with multiple light sources using three-layered hierarchical genetic algorithm
|
CHEN Wen-Gong; UANG Chii-Maw |
| 國立交通大學 |
2017-04-21T06:48:48Z |
Optimal design of Ge-dot photoMOSFETs for highly-integrated monolithic Si Photonics
|
Kuo, Ming-Hao; Lee, M. C.; Tien, J. W.; Lai, Wei-Ting; Li, Pei-Wen |
| 國立成功大學 |
2012-05 |
Optimal design of geometric parameters of double-layered microchannel heat sinks
|
Hung, Tu-Chieh; Yan, Wei-Mon; Wang, Xiao-Dong; Huang, Yu-Xian |
