| 朝陽科技大學 |
2021-11-03 |
Optimal work-in-process inventory of pull type manufacturing system
|
洪士程; Horng, Shih-Cheng;Lin, Shieh-Shing; Li, Qi-Sheng |
| 國立臺灣科技大學 |
1998 |
Optimal workpiece setups for 4-axis NC machining based on machinability
|
Tang, K. ; Chen, L. L. ; Chou, S. Y. |
| 國立高雄第一科技大學 |
2013.12 |
Optimal Yield Rate in ACF Cutting Process of TFT-LCD Module Using Orthogonal Particle Swarm Optimization
|
Kuo, Jian Long;Hsieh, Chung Hao |
| 國立高雄第一科技大學 |
2013.12 |
Optimal Yield Rate in ACF Cutting Process of TFT-LCD Module Using Orthogonal Particle Swarm Optimization Based on Response Surface Design
|
Kuo, Jian-Long;Cheng, Ming-Te |
| 淡江大學 |
2025-01-19 |
Optimal YOLO-based Model for Fabric Anomaly Detection
|
Silabumrungrad, Nonpawit;Somridjinda, Supakrit;Chen, Chien-Chang;Charoensuk, Jirawan;Chootong, Chalothon |
| 國立成功大學 |
2018-10 |
Optimal Z-Complementary Sequence Sets With Good Peak-to-Average Power-Ratio Property
|
Wu;Shing-Wei;Chen;Chao-Yu |
| 國立成功大學 |
2018-10 |
Optimal Z-Complementary Sequence Sets With Good Peak-to-Average Power-Ratio Property
|
陳昭羽; CHEN, CHAO-YU;Wu, Shing-Wei |
| 淡江大學 |
1996-10 |
Optimal zone lengths in multi-pass zone-refining processes
|
何啟東; Ho, Chii-dong; 葉和明; Yeh, Ho-ming; 葉佐倫; Yeh, Tzuoo-Lun |
| 淡江大學 |
1996-10-01 |
Optimal Zone Lengths in Multi-pass Zone-Refining Processes
|
Ho, Chii-Dong;Yeh, Ho-Ming;Yeh, Tzuoo-Lun |
| 大葉大學 |
2009-01 |
Optimal α-chymotrypsin-catalyzed synthesis of N-Ac-Phe-Gly-NH2
|
Ju, H. Y.;Too, J. R.;Chang, C.;Seieh, C. J. |
| 大葉大學 |
2009-02 |
Optimal α-Chymotrypsin-Catalyzed Synthesis of N-Ac-Phe-Gly-NH2
|
Ju, Hen-Yi;Too, J. R.;Shieh, Chwen-Jen |
| 國立臺灣科技大學 |
1994 |
Optimal' Rule-Switching for Flow Shops with Random Workloads
|
Chen, J. C. ; Thesen, A. |
| 東海大學 |
2013 |
Optimal, nearly optimal and robust procedures for the exponential distribution with relative linear exponential loss
|
Yang, C.-C.; Hwang, L.-C. |
| 國立交通大學 |
2014-12-08T15:06:00Z |
OPTIMAL-CONTROL OF LINEAR TIME-DELAY SYSTEMS VIA GENERAL ORTHOGONAL POLYNOMIALS
|
TSAY, SC; WU, IL; LEE, TT |
| 國立交通大學 |
2014-12-08T15:03:32Z |
OPTIMAL-DESIGN OF A FINITE-BUFFER POLLING NETWORK WITH MIXED SERVICE DISCIPLINE AND GENERAL SERVICE ORDER SEQUENCE
|
HWANG, LC; CHANG, CJ |
| 國立交通大學 |
2014-12-08T15:05:05Z |
OPTIMAL-DESIGN OF A PILOT OTEC POWER-PLANT IN TAIWAN
|
TSENG, CH; KAO, KY; YANG, JC |
| 國立交通大學 |
2014-12-08T15:06:12Z |
OPTIMAL-DESIGN OF CONTROL-SYSTEMS WITH LARGE PLANT UNCERTAINTY
|
TSAI, TP; WANG, TS |
| 國立交通大學 |
2014-12-08T15:06:04Z |
OPTIMAL-DESIGN OF DIGITAL-CONTROL SYSTEMS WITH LARGE PLANT UNCERTAINTY
|
TSAI, TP; WANG, TS |
| 國立交通大學 |
2014-12-08T15:05:53Z |
OPTIMAL-DESIGN OF LAMINATED COMPOSITE PLATES WITH DYNAMIC AND STATIC CONSIDERATIONS
|
KAM, TY; CHANG, RR |
| 國立交通大學 |
2014-12-08T15:06:04Z |
OPTIMAL-DESIGN OF NON-MINIMUM-PHASE CONTROL-SYSTEMS WITH LARGE PLANT UNCERTAINTY
|
TSAI, TP; WANG, TS |
| 國立交通大學 |
2014-12-08T15:05:09Z |
OPTIMAL-DESIGN PARAMETERS IN CAPACITY ASSIGNMENT FOR A BROAD-BAND NETWORK
|
CHANG, CJ; CHU, YJ |
| 大葉大學 |
2011-06 |
OPTIMAL-FEEDRATE INTERPOLATION FOR MACHINING PARAMETRIC CURVES
|
Chang, Yih-Fang;Nguyen, Truong-Giang |
| 臺大學術典藏 |
1987 |
Optimal-Observer Design for Linear Dynamical Systems with Uncertain Parameters
|
Kuo, Te-Son; 王勝德; Kuo, Te-Son |
| 國立臺灣大學 |
1987 |
Optimal-Observer Design for Linear Dynamical Systems with Uncertain Parameters
|
王勝德; 許振發; 郭德盛; 王勝德; 許振發; Kuo, Te-Son |
| 國立成功大學 |
1997-06 |
Optimality and duality for complex nondifferentiable fractional programming
|
Liu, Jen-Chwan; Lin, Chin-Cheng; Sheu, Ruey-Lin |
