| 國立勤益科技大學 |
2011-10 |
Optimization of Ultrasonic Plastic Welding Horns on Amplitude Uniformity
|
洪榮崇 |
| 大葉大學 |
2014-12-12 |
Optimization of Ultrasonic-Assisted Extraction of Cordycepin from Cordyceps militaris Using Orthogonal Experimental Design
|
Wang, Hsiu-Ju;Pan, Meng-Chun;Chang, Chao-Kai;Chang, Shu-Wei;Hsieh, Chang-Wei |
| 大葉大學 |
2014-12-12 |
Optimization of Ultrasonic-Assisted Extraction of Cordycepin from Cordyceps militaris Using Orthogonal Experimental Design
|
Wang, Hsiu-Ju;Pan, Meng-Chun;Chang, Chao-Kai;Chang, Shu-Wei;Hsieh, Chang-Wei |
| 東海大學 |
2014 |
Optimization of Ultrasound Assisted Extraction Conditions for Total Phenols with Anti-hyperglycemic Activity from PsidiumGuajava Leaves
|
C.W.Liu, Y.C.Wang, H.C.Lu盧錫祺),W.D.Chiang(江文德) |
| 嘉南藥理大學 |
2014-11 |
Optimization of ultrasound-assisted oxidative desulfurization of model sulfur compounds using commercial ferrate (VI)
|
Choi, Angelo Earvin Sy; Roces, Susan; Dugos, Nathaniel; Futalan, Cybelle Morales; Lin, Shiow-Shyung; Wan, Meng-Wei |
| 臺大學術典藏 |
2020-01-13T08:20:40Z |
Optimization of unequal-active-and-passive-area piezoelectric unimorph cantilevers with collisions for ultra-thin keyboard design
|
Smith, S.; Chao, C.-K.; Juang, J.-Y.; JIA-YANG JUANG |
| 臺大學術典藏 |
2017 |
Optimization of unequal-active-and-passive-area piezoelectric unimorph cantilevers with collisions for ultra-thin keyboard design
|
Smith, S.; Chao, C.-K.; Juang, J.-Y.; SHANA SMITH |
| 朝陽科技大學 |
2025-12 |
Optimization of vacuum evaporation processing parameters for concentration of jambolan plum (Syzygium cumini) juice using response surface methodology
|
Khwanchai, Paidaeng;Suwalee, Fong-in;Prommajak, Trakul;Chartarrayawadee, Widsanusan;Phandaeng, Noppakhao |
| 臺大學術典藏 |
1992 |
Optimization of Vibration Reduction on the Mast by Active Stay System
|
Lee, Ya-Jung; Hsueh, Wen-Jeng; Hsueh, Wen-Jeng; Lee, Ya-Jung |
| 國立臺灣大學 |
1992 |
Optimization of Vibration Reduction on the Mast by Active Stay System
|
薛文證; 李雅榮; Hsueh, Wen-Jeng; Lee, Ya-Jung |
| 臺大學術典藏 |
2018-09-10T14:56:53Z |
Optimization of virus-induced gene silencing in Catharanthus roseus
|
Sung, Y.-C.;Lin, C.-P.;Chen, J.-C.; Sung, Y.-C.; Lin, C.-P.; Chen, J.-C.; JEN-CHIH CHEN et al.; CHAN-PIN LIN |
| 嘉南藥理大學 |
2015-04 |
Optimization of visible-light photocatalytic degradation of acetaminophen by K-3[Fe(CN)(6)]-modified TiO2
|
Lin, Justin Chun-Te; de Luna, Mark Daniel G.; Gotostos, Mary Jane N.; Lu, Ming-Chun |
| 國立成功大學 |
2008 |
Optimization of wafer-back pressure profile in chemical mechanical planarization
|
Yang, Tian-Shiang; Wang, Y. C.; Chen, Kuo-Shen; Chen, Y. J.; Yan, J. L. |
| 國立臺灣大學 |
1997-01 |
Optimization of walking in children
|
Jeng, SF; Liao, HF; Lai, JS; Hou, JW |
| 臺大學術典藏 |
2018-09-10T06:14:57Z |
Optimization of walking in children
|
Jeng, S.-F.;Liao, H.-F.;Lai, J.-S.;Hou, J.-W.; SUH-FANG JENG; JIN-SHIN LAI |
| 臺大學術典藏 |
2020-07-01T08:53:41Z |
Optimization of walking in children
|
Suh-Fang Jeng;Liao H.-F.;Lai J.-S.;Hou J.-W.; SUH-FANG JENG; Liao H.-F.; Lai J.-S.; Hou J.-W. |
| 國立臺灣科技大學 |
1996 |
Optimization of Waverider Configurations Derived from Inclined Circular and Elliptic Cones
|
Lin, S. C. ; Luo, Y. S. |
| 國立成功大學 |
2018 |
Optimization of wear and friction characteristics of Phyllanthus Emblica seed oil based lubricant using response surface methodology
|
Singh, Y.;Singh, P.;Sharma, A.;Choudhary, P.;Singla, A.;Singh, N.K. |
| 大葉大學 |
2003-03 |
OPTIMIZATION OF WEDGE-SHAPED PARTS FOR INJECTION MOLDING AND INJECTION COMPRESSION MOLDING
|
蘇義豊 |
| 國立交通大學 |
2014-12-08T15:36:43Z |
Optimization of weld bead geometry in the activated GMA welding process via a grey-based Taguchi method
|
Lin, Hsuan-Liang; Yan, Jia-Ching |
| 國立交通大學 |
2019-04-02T06:00:10Z |
Optimization of weld bead geometry in the activated GMA welding process via a grey-based Taguchi method
|
Lin, Hsuan-Liang; Yan, Jia-Ching |
| 朝陽科技大學 |
2023-09 |
Optimization of wickless heat pipe heat exchanger using R1234-yf and ethanol as working fluids
|
Alkhafaj, Osamah R.;Yasin, Nabil J.;Audai, H. Al-abbas |
| 建國科技大學 |
2011 |
Optimization of Wideband Multilayer Antireflection Coating Design Using Iterative Jumping Search Algorithm
|
劉裕永 |
| 中華大學 |
2010 |
Optimization of Wire Electrical Discharge Machining for Pure Tungsten Using a Neural Network Integrated Simulated Annealing Approach
|
陳獻清; Chen, Hsien-Ching |
| 國立臺灣海洋大學 |
2014 |
Optimization of Yard Truck Scheduling and Routing Model with Time-Space Network
|
Tsai, Feng-Ming;Chang, Yu-Ming |
