| 臺大學術典藏 |
1994 |
Parametric Identification of Truss Structures Using Static Strains
|
Chian, C. C.; Liu, Pei-Ling; Chian, C. C.; 劉佩玲; Liu, Pei-Ling; Chian, C. C. |
| 臺大學術典藏 |
2020-04-28T07:15:08Z |
Parametric identification of truss structures using static strains
|
PEI-LING LIU; Chian, C.-C.; Liu, P.-L. |
| 中國文化大學 |
2020-09 |
Parametric instability of functionally graded carbon nanotube-reinforced hybrid composite plates in thermal environments
|
Chen, CS (Chen, Chun-Sheng); Wang, H (Wang, Hai); Chen, TJ (Chen, Tsyr-Jang); Chen, WR (Chen, Wei-Ren) |
| 中國文化大學 |
2010-09 |
Parametric instability of spinning twisted Timoshenko beams under compressive axial pulsating loads
|
Chen, WR (Chen, Wei-Ren) |
| 中國文化大學 |
2015-09 |
Parametric instability of twisted Timoshenko beams with localized damage
|
Chen, Wei-Ren; Chen, Chun-Sheng |
| 國立臺灣科技大學 |
2016 |
Parametric investigation for rigid circular foundations undergoing vertical and torsional vibrations
|
Chen, S.-S;Liao, K.-H;Shi, J.-Y. |
| 南台科技大學 |
2006-01 |
Parametric Investigation of Laser-Assisted Direct Imprint (LADI) Technique
|
莊承鑫; Fei-Bin Hsiao; Yung-Chun Lee; Cheng-Hsin Chuang; Chun-Yi. Lin |
| 南台科技大學 |
2005-11 |
Parametric Investigation of Laser-Assisted Direct Imprint (LADI) Technique
|
莊承鑫; Fei-Bin Hsiao; Yung-Chun Lee; Cheng-Hsin Chuang; Chun-Yi. Lin |
| 國立成功大學 |
2006 |
Parametric investigation of laser-assisted direct imprint (LADI) technique
|
Lin, C. Y.; Lee, Yung-Chun; Hsiao, Fei-Bin; Chuang, C. H. |
| 國立成功大學 |
2022-04 |
Parametric joint compliance analysis of a 3-UPU parallel robot
|
Tsai;Chun-Yu;Yu;Chen-Pin;Yeh;Pin-Chun;Lan;Chao-Chieh |
| 國立成功大學 |
1996-05 |
Parametric linear semi-infinite programming
|
Lin, C. J.; Fang, S. C.; Wu, Soon-Yi |
| 臺大學術典藏 |
2018-09-10T05:57:03Z |
Parametric linear semi-infinite programming
|
Lin, C.-J.;Fang, S.-C.;Wu, S.-Y.; Lin, C.-J.; Fang, S.-C.; Wu, S.-Y.; CHIH-JEN LIN |
| 臺北醫學大學 |
2005 |
Parametric Medeling analysis of abnormal Intra-QRS potentials in Signal Averaged ECG
|
楊騰芳; Lin CC; Chen CM; Yang TF; Yang IF |
| 國立成功大學 |
2017-05 |
Parametric methods for comparing the performance of two classification algorithms evaluated by k-fold cross validation on multiple data sets
|
Wong;Tzu-Tsung |
| 臺北醫學大學 |
2005 |
Parametric Modeling Analysis of Abnormal Intra-QRS Potentials in Signal-Averaged ECG
|
楊騰芳; Lin CC; Yang TF; Chen CM; Yang IF |
| 國立交通大學 |
2014-12-08T15:03:48Z |
PARAMETRIC MULTIPLE EIGENVALUE SHIFTING WITH MINIMUM EIGEN-VALUE SENSITIVITY VIA STATE-FEEDBACK BASED ON BLOCK SCHUR FORM
|
LIN, JJ; WU, YC |
| 國立交通大學 |
2014-12-08T15:20:08Z |
PARAMETRIC NONLINEAR INTEGER PROGRAMMING - THE RIGHT-HAND SIDE CASE
|
CHERN, MS; JAN, RH; CHERN, RJ |
| 國立交通大學 |
2014-12-08T15:21:35Z |
Parametric OBMC for Pixel-Adaptive Temporal Prediction on Irregular Motion Sampling Grids
|
Chen, Yi-Wen; Peng, Wen-Hsiao |
| 國立成功大學 |
2006-11 |
Parametric optimization analysis for minimum-fuel low-thrust coplanar orbit transfer
|
Chen, Yumin; Sheu, Dong-Long |
| 國立臺灣科技大學 |
2009 |
Parametric optimization methods for the tokamak plasma control problem
|
Zavadsky S.V.; Ovsyannikov D.A.; Chung S.-L. |
| 國立臺灣科技大學 |
2017 |
Parametric optimization of density and dimensions in three-dimensional printing of Ti-6Al-4V powders on titanium plates using selective laser melting
|
Kuo, C.;Su, C.;Chiang, A. |
| 國立臺灣海洋大學 |
2017-11 |
Parametric optimization of density and dimensions in three-dimensional printing of Ti-6Al-4V powders on titanium plates using selective laser melting
|
Chunliang Kuo; Chihhao Su; Anchun Chiang |
| 中華大學 |
2012 |
Parametric Optimization of Micro Drilling using Machine Vision Technique Combined with Taguchi Method
|
邱奕契; Chiou, Yih-Chih |
| 中華大學 |
2012 |
Parametric Optimization of Micro Drilling using Machine Vision Technique Combined with Taguchi Method
|
邱奕契; Chiou, Yih-Chih |
| 臺大學術典藏 |
2018-09-10T03:50:34Z |
Parametric Optimization of Open Real-Time Systems
|
F. Wang; H.-C. Yen; FARN WANG |
