| 臺大學術典藏 |
2018-09-10T04:33:06Z |
Design optimization for asymmetrical ZVS-PWM Zeta converter
|
Wu, T.-F.; Liang, S.-A.; Chen, Y.-M.; YAOW-MING CHEN |
| 國立臺灣科技大學 |
2009-11-02 |
Design Optimization for Cogging Torque Minimization and Efficiency Maximization of a High-speed PM Motor
|
Hwang, Chang-Chou; Chang, Chia-Ming; Li, Ping-Lun |
| 臺大學術典藏 |
1993 |
Design optimization for high power and high speed surface-emitting lasers
|
Gamelin, J;Lin, J;Lau, KY;Hong, M;Mannaerts, JP; Gamelin, J; Lin, J; Lau, KY; Hong, M; Mannaerts, JP; MINGHWEI HONG |
| 修平科技大學 |
2005 |
Design Optimization for Pin-Fin Heat Sinks
|
Chen, H. T.;Chen, P. L.;Horng, J. T.;Hung, Y. H. |
| 臺大學術典藏 |
2019-07-03T07:15:32Z |
Design optimization for the hybrid power system of a green building
|
Wang F.-C.;Chen P.-J.; Chen P.-J.; Wang F.-C. |
| 國立臺灣科技大學 |
2015 |
Design optimization for ultrahigh efficiency buck regulator using wide bandgap devices
|
Lai, J.-S;Lin, C.-Y;Liu, Y.-C;Zhang, L;Zhao, X. |
| 國立交通大學 |
2015-07-21T08:31:14Z |
Design Optimization of 16-nm Bulk FinFET Technology via Geometric Programming
|
Su, Ping-Hsun; Li, Yiming |
| 國立交通大學 |
2018-08-21T05:56:36Z |
Design Optimization of a 1.4 GHz Low Power Bulk-Driven Mixer
|
Li, Chun-Hsing; Kuo, Chien-Nan |
| 臺大學術典藏 |
2020-08-05T02:45:34Z |
Design optimization of a 1.4 GHz low power bulk-driven mixer
|
Chun-Hsing Li;Chien-Nan Kuo;CHUN-HSING LI; Chun-Hsing Li; Chien-Nan Kuo; CHUN-HSING LI; CHUN-HSING LI |
| 臺大學術典藏 |
2020-02-26T01:36:45Z |
Design Optimization of a Compliant Revolute Joint
|
Wu, J.-M.;Shih, P.-J.;Lee, J.-J.Po-Jen Shih; Wu, J.-M.; Shih, P.-J.; Lee, J.-J.; PO-JEN SHIH |
| 國立交通大學 |
2014-12-08T15:42:07Z |
Design optimization of a current mirror amplifier integrated circuit using a computational statistics technique
|
Li, Yiming; Li, Yih-Lang; Yu, Shao-Ming |
| 元智大學 |
2013-11-15 |
Design Optimization of an Industrial Muffler by Taguchi Method
|
Tachung Yang; Sheng-Shian Tsai |
| 元智大學 |
2014-3-1 |
Design Optimization of an Industrial Muffler by Taguchi Method
|
Tachung Yang; Sheng-Shian Tsai |
| 國立高雄第一科技大學 |
2007.02 |
Design optimization of cutting parameters for side milling operations with multiple performance characteristics
|
Chang, Ching-Kao;H.S.Lu; 張清靠 |
| 國立臺灣科技大學 |
1998 |
Design Optimization of Cutting Parameters for Turning Operations Based on the Taguchi Method
|
Yang, W.H.;Tarng, Y.S. |
| 國立交通大學 |
2014-12-08T15:39:41Z |
Design optimization of ESD protection and latchup prevention for a serial I/O IC
|
Huang, CY; Chen, WF; Chuan, SY; Chiu, FC; Tseng, JC; Lin, IC; Chao, CJ; Leu, LY; Ker, MD |
| 國立臺灣科技大學 |
2010 |
Design optimization of extrusion-blow-molded parts using prediction-reliability-guided search of evolving network modeling
|
Yu J.-C.; Juang J.-Y. |
| 國立高雄第一科技大學 |
2010.07 |
Design optimization of extrusion-blow-molded parts using prediction-reliability-guided search of evolving network modeling
|
Yu, Jyh-Cheng;Juang, Jyh-Yeong; 余志成 |
| 國立交通大學 |
2017-04-21T06:49:25Z |
Design Optimization of Inductively Source-Degenerated FET LNAs Using Noise Transformation Matrix (Invited Talk)
|
Meng, Chinchun; Hsiao, Yu-Chih |
| 臺大學術典藏 |
2018-09-10T07:41:37Z |
Design Optimization of Low-Power 90nm CMOS SOC Applications Using 0.5V Bulk PMOS Dynamic-Threshold with Dual Threshold (MTCMOS) BP-DTMOS-DT Technique
|
C. H. Lin;J. B. Kuo; C. H. Lin; J. B. Kuo; JAMES-B KUO |
| 淡江大學 |
1995-11 |
Design optimization of machine-tool spindle with preloaded bearings through minimized cutter deflection
|
Shih, C. J.; Wu, C. M. |
| 國立中山大學 |
2009 |
Design optimization of needle geometry for wafer-level probing test
|
M.K. Shih;Y.S. Lai |
| 國立成功大學 |
2019-04 |
Design Optimization of Nonrotational and Rotational Needle Insertion for Minimal Cutting Forces
|
林啟倫; LIN, CHI-LUN;Jheng, Yu-Chen;Ng, Si Yen;Yen, Chun-Jung |
| 國立成功大學 |
2020-06-1 |
Design Optimization of Nonrotational and Rotational Needle Insertion for Minimal Cutting Forces
|
Lin;Chi-Lun;Jheng;Yu-Chen;Ng;Yen, Si;Yen;Jung, Chun |
| 國立東華大學 |
2003 |
Design Optimization of Product Forms using Neural Networks: a case study of cellular phones
|
林彥呈 |
